SVN-BISECT(1) User Contributed Perl Documentation SVN-BISECT(1)NAMEsvn-bisectSYNOPSIS
$ svn-bisect--min 25000 --max 26000 start
$ svn-bisect bad
$ svn-bisect bad
$ svn-bisect good
[etc etc]
$ svn-bisect reset
DESCRIPTION
This tool's purpose is to help you determine which revision of a
subversion repository contains a change. It does this by employing a
binary search. It will manage the current revision of your checkout
directory, and narrow in on the target revision, as you give it clues
about the current revision such as "before" (this revision is before
the one you want) or "after" (this revision is after the one you want).
Start a bisect session with the "start" command. Then, walk the binary
tree by using the "before" and "after" commands. When you are done,
the tool will tell you the target revision.
The most common usage scenario is finding out which rev a bug was
introduced in. For this purpose, some command aliases have been added:
if the current revision contains the bug, you can use the "bad" command
(meaning, this revision is "after" the change you want to find),
otherwise use the "good" command (meaning, this revision is "before"
the change you want to find).
All commands should be run from within a subversion checkout directory.
After a "svn-bisect start", all subsequent svn-bisect commands need to
be run from that same directory.
OPTIONS
Options MUST be specified before subcommands, on the command line.
Options specified after the subcommand will be passed to the
subcommand; this is currently only useful for the "run" subcommand.
--help
Use anywhere. Output a command list, or specific help for the
given command.
--version
Use anywhere. Tells you my version number.
--verbose
Use anywhere. Enable some additional informational output.
--min
Use with "start". Specify the beginning revision of the range.
--max
Use with "start". Specify the ending revision of the range.
--back
Use with "reset". Restores the original repository version.
SUBCOMMANDS
start
svn-bisect [--min M] [--max N] start
Start a new bisect session. If --min isn't specified, you can specify
it later with the "good" command. If --max isn't specified, you can
specify it later with the "bad" command.
after
svn-bisect after [revision]
or: svn-bisect bad [revision]
Inform svn-bisect that the specified revision is *after* the change
we're looking for. If you don't specify a revision number, the current
revision of the working tree is used. If you are looking for the rev
which introduced a bug (which is the common case), the alias "bad"
might be easier to remember.
before
svn-bisect before [revision]
or: svn-bisect good [revision]
Inform svn-bisect that the specified revision is *before* the change
we're looking for. If you don't specify a revision number, the current
revision of the working tree is used. If you are looking for the rev
which introduced a bug (which is the common case), the alias "good"
might be easier to remember.
skip
svn-bisect skip [<rev> [<rev>...]]
Tell svn-bisect to skip the specified revision. If no revision is
specified, the current version of the working tree is used. Do this if
you can't determine whether the current revision is bad or good, if,
for instance, some other issue prevents it from compiling successfully.
You may specify more than one revision, and they will all be skipped.
unskip
svn-bisect unskip <rev> [<rev>...]
Tell svn-bisect to no longer skip the specified revision. You must
specify at least one revision to unskip. If you specify more than one,
they will all be unskipped.
run
svn-bisect run <command> [arguments...]
Runs a command repeatedly to automate the bisection process.
Examples:
svn-bisect run ./mytest.sh
svn-bisect run test ! -f file
We run the command and arguments until a conclusion is reached. The
command (usually a shell script) tells us about the current revision by
way of its return code. The following return codes are handled:
0: This revision is before the change we're looking for
1-124, 126-127: This revision includes the change we're looking for
125: This revision is untestable and should be skipped
any other value: The command failed to run, abort bisection.
In other words, "run" will automatically find the last revision for
which the given command returns success. (Keep in mind that in the
shell, "0" means "success".)
The normal caveats apply. In particular, if your script makes any
changes, don't forget to clean up afterwards.
reset
svn-bisect reset
Clean up after a bisect, and return the repository to the revision it
was at before you started.
help
svn-bisect help
svn-bisect help start
Gives you some useful descriptions and usage information.
EXAMPLE
...Because, you know, no software documentation is complete without a
flashy screenshot, these days.
So, lets say you were wondering when the subversion project added the
"Last Changed Rev:" line to the output of "svn info". Determining the
existence of this change is a straightforward matter of searching for
the text string... if a result was found, the current revision is
"after", otherwise it was "before". So a bisect looks like this:
$ svn co http://svn.apache.org/repos/asf/subversion/trunk/subversion
[snip lots of subversion checkout spam]
Checked out revision 980012.
$ cd subversion
$ ack --nocolor --nogroup 'Last Changed Rev'
svn/info-cmd.c:362: SVN_ERR(svn_cmdline_printf(pool, _("Last Changed Rev: %ld\n"),
tests/cmdline/depth_tests.py:2056: 'Last Changed Rev' : '^1$',
tests/cmdline/upgrade_tests.py:387: 'Last Changed Rev' : '7'
tests/cmdline/upgrade_tests.py:396: 'Last Changed Rev' : '10'
$ date
Wed Jul 28 06:40:03 EDT 2010
$ svn-bisect--min 0 start
$ svn-bisect after
Fetching history from r0 to r980012; it may take a while.
There are 24349 revs left in the pool. Choosing r862045.
$ ack --nocolor --nogroup 'Last Changed Rev'
svn/info-cmd.c:348: SVN_ERR(svn_cmdline_printf(pool, _("Last Changed Rev: %ld\n"),
$ svn-bisect after
There are 12174 revs left in the pool. Choosing r845633.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:153: printf ("Last Changed Rev: %" SVN_REVNUM_T_FMT "\n", entry->cmt_rev);
$ svn-bisect after
There are 6087 revs left in the pool. Choosing r840416.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
There are 3043 revs left in the pool. Choosing r842636.
# ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:153: printf ("Last Changed Rev: %" SVN_REVNUM_T_FMT "\n", entry->cmt_rev);
$ svn-bisect after
There are 1521 revs left in the pool. Choosing r841463.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
There are 760 revs left in the pool. Choosing r841993.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:161: printf ("Last Changed Rev: %" SVN_REVNUM_T_FMT "\n", entry->cmt_rev);
$ svn-bisect after
There are 380 revs left in the pool. Choosing r841730.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
There are 189 revs left in the pool. Choosing r841860.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
There are 94 revs left in the pool. Choosing r841933.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:151: printf ("Last Changed Rev: %" SVN_REVNUM_T_FMT "\n", entry->cmt_rev);
$ svn-bisect after
There are 47 revs left in the pool. Choosing r841904.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:150: printf ("Last Changed Rev: %ld\n", entry->cmt_rev);
$ svn-bisect after
There are 23 revs left in the pool. Choosing r841880.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
There are 11 revs left in the pool. Choosing r841890.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:153: printf ("Last Changed Rev: %ld\n", entry->cmt_rev);
$ svn-bisect after
There are 5 revs left in the pool. Choosing r841883.
$ ack --nocolor --nogroup 'Last Changed Rev'
clients/cmdline/info-cmd.c:153: printf ("Last Changed Rev: %ld\n", entry->cmt_rev);
$ svn-bisect after
There are 2 revs left in the pool. Choosing r841882.
$ ack --nocolor --nogroup 'Last Changed Rev'
$ svn-bisect before
This is the end of the road!
The change occurred in r841883.
$ svn log -r841883
------------------------------------------------------------------------
r841883 | rooneg | 2002-04-27 15:23:38 -0400 (Sat, 27 Apr 2002) | 30 lines
As requested by cmpilato in issue #676, add an 'svn info' command, which
prints out the contents of the svn_wc_entry_t for a given versioned resource.
* CHANGES
note the addition of the 'svn info' command.
* subversion/clients/cmdline/cl.h
add declaration for svn_cl__info.
* subversion/clients/cmdline/info-cmd.c
new file implementing the info command.
* subversion/clients/cmdline/main.c
hook up the info command.
* subversion/clients/cmdline/man/svn.1
document the info command.
* subversion/tests/clients/cmdline/getopt_tests_data/svn--help_stdout
update for the addition of info command.
* subversion/tests/clients/cmdline/getopt_tests_data/svn_help_stdout
ditto.
* subversion/tests/clients/cmdline/getopt_tests_data/svn_stderr
ditto.
* tools/dev/bash_completion
add 'info' to the tab completion.
------------------------------------------------------------------------
$ date
Wed Jul 28 06:45:27 EDT 2010
So, there it is. In 5 minutes, we've learned that "Last Changed Rev:"
has been in there since the inception of the "svn info" command itself,
back in 2002.
You can also provide a script command to do all of the work for you:
$ svn-bisect--min 0 --max 980012 start
$ svn-bisect run '! grep -r "Last Changed Rev" .'
REQUIREMENTS
This tool requires:
* A computer
* A brain
* An installation of Perl, version 5.8 or above
* The IO::All module, installed from CPAN
* The YAML::Syck module, installed from CPAN
* The "svn" command somewhere in your PATH, executable by the current
user
* A svn checkout with some history to bisect.
AUTHOR
Mark Glines <mark-cpan@glines.org>
REPOSITORY
Browser: <http://github.com/Infinoid/svn-bisect/> Clone:
<git://github.com/Infinoid/svn-bisect.git>
THANKS
* Thanks to the git-bisect author(s), for coming up with a user
interface that
I actually like.
* Thanks to Will Coleda for inspiring me to actually write and release
this.
* Thanks to the Parrot project for having so much random stuff going on
as to
make a tool like this necessary.
SEE ALSO
App::SVNBinarySearch by Will Coleda:
<http://search.cpan.org/dist/App-SVNBinarySearch/>
COPYRIGHT AND LICENSE
This software is copyright (c) 2008 Mark Glines.
It is distributed under the terms of the Artistic License 2.0. For
details, see the "LICENSE" file packaged alongside this tool.
perl v5.20.2 2010-08-29 SVN-BISECT(1)
