TGTADM(8) System Management Commands TGTADM(8)NAMEtgtadm - Linux SCSI Target Administration Utility.
SYNOPSIStgtadm--lld [driver] --op [operation] --mode [mode] [OPTION]...
DESCRIPTIONtgtadm is used to monitor and modify everything about Linux SCSI target
software: targets, volumes, etc.
OPTIONS--lld [driver] --op new --mode target --tid=[id] --targetname [name]
add a new target with [id] and [name].
--lld [driver] --op delete --mode target --tid=[id]
delete specific target with [id]. The target must have no active I_T
nexus.
--lld [driver] --op show --mode target
show all the targets.
--lld [driver] --op show --mode target --tid=[id]
show target parameters of a target with [id].
--lld [driver] --op new --mode=logicalunit --tid=[id] --lun=[lun]
--backing-store [path]
add a new logical unit with [lun] to specific target with [id]. The
logical unit is offered to the initiators. [path] must be block device
files (including LVM and RAID devices) or regular files. lun0 is
reserved for a special device automatically created.
--lld [driver] --op delete --mode=logicalunit --tid=[id] --lun=[lun]
delete specific logical unit with [lun] that the target with [id] has.
--lld [driver] --op bind --mode=target --tid=[id] --initiator-
address=[address]
add the address to the access lists of the target with [id]. Initiators
with the address can access to the target. 'ALL' is a special address
to allow all initiators to access to a target.
--lld [driver] --op unbind --mode=target --tid=[id] --initiator-
address=[address]
delete the address from the access lists of the target with [id].
--lld [driver] --op update --mode=target --tid=[id] --name=[parameter]
--value=[value]
change the value of [parameter] of the target with [id] to [value].
--version
display version and exit
--help
display a list of available options and exits
REPORTING BUGS
Report bugs to <stgt-devel@lists.berlios.de>
System Management Commands 2007-06-20 TGTADM(8)
