thin_aeolus_configseSELinuxlPolicy)thin_aeothin_aeolus_configserver_selinux(8)NAMEthin_aeolus_configserver_selinux - Security Enhanced Linux Policy for
the thin_aeolus_configserver processes
DESCRIPTION
Security-Enhanced Linux secures the thin_aeolus_configserver processes
via flexible mandatory access control.
The thin_aeolus_configserver processes execute with the thin_aeo‐
lus_configserver_t SELinux type. You can check if you have these pro‐
cesses running by executing the ps command with the -Z qualifier.
For example:
ps -eZ | grep thin_aeolus_configserver_t
ENTRYPOINTS
The thin_aeolus_configserver_t SELinux type can be entered via the
thin_aeolus_configserver_exec_t file type.
The default entrypoint paths for the thin_aeolus_configserver_t domain
are the following:
/usr/bin/aeolus-configserver-thinwrapper
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
thin_aeolus_configserver policy is very flexible allowing users to set‐
up their thin_aeolus_configserver processes in as secure a method as
possible.
The following process types are defined for thin_aeolus_configserver:
thin_aeolus_configserver_t
Note: semanage permissive -a thin_aeolus_configserver_t can be used to
make the process type thin_aeolus_configserver_t permissive. SELinux
does not deny access to permissive process types, but the AVC (SELinux
denials) messages are still generated.
BOOLEANS
SELinux policy is customizable based on least access required.
thin_aeolus_configserver policy is extremely flexible and has several
booleans that allow you to manipulate the policy and run thin_aeo‐
lus_configserver with the tightest access possible.
If you want to allow all daemons to write corefiles to /, you must turn
on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the
daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on
the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
MANAGED FILES
The SELinux process type thin_aeolus_configserver_t can manage files
labeled with the following file types. The paths listed are the
default paths for these file types. Note the processes UID still need
to have DAC permissions.
cluster_conf_t
/etc/cluster(/.*)?
cluster_var_lib_t
/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t
/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
root_t
/
/initrd
thin_aeolus_configserver_lib_t
/var/lib/aeolus-configserver(/.*)?
thin_aeolus_configserver_log_t
/var/log/aeolus-configserver(/.*)?
thin_aeolus_configserver_var_run_t
/var/run/aeolus-configserver(/.*)?
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file
type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files.
SELinux thin_aeolus_configserver policy is very flexible allowing users
to setup their thin_aeolus_configserver processes in as secure a method
as possible.
STANDARD FILE CONTEXT
SELinux defines the file context types for the thin_aeolus_con‐
figserver, if you wanted to store files with these types in a diffent
paths, you need to execute the semanage command to sepecify alternate
labeling and then use restorecon to put the labels on disk.
semanage fcontext -a -t thin_aeolus_configserver_exec_t '/srv/thin_aeo‐
lus_configserver/content(/.*)?'
restorecon -R -v /srv/mythin_aeolus_configserver_content
Note: SELinux often uses regular expressions to specify labels that
match multiple files.
The following file types are defined for thin_aeolus_configserver:
thin_aeolus_configserver_exec_t
- Set files with the thin_aeolus_configserver_exec_t type, if you want
to transition an executable to the thin_aeolus_configserver_t domain.
thin_aeolus_configserver_lib_t
- Set files with the thin_aeolus_configserver_lib_t type, if you want
to treat the files as thin aeolus configserver lib data.
thin_aeolus_configserver_log_t
- Set files with the thin_aeolus_configserver_log_t type, if you want
to treat the data as thin aeolus configserver log data, usually stored
under the /var/log directory.
thin_aeolus_configserver_var_run_t
- Set files with the thin_aeolus_configserver_var_run_t type, if you
want to store the thin aeolus configserver files under the /run or
/var/run directory.
Note: File context can be temporarily modified with the chcon command.
If you want to permanently change the file context you need to use the
semanage fcontext command. This will modify the SELinux labeling data‐
base. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), thin_aeolus_configserver(8), semanage(8), restorecon(8),
chcon(1), sepolicy(8) , setsebool(8)thin_aeolus_configserver13-11-20thin_aeolus_configserver_selinux(8)
