TIFICC(1)TIFICC(1)NAMEtificc - little cms ICC profile applier for TIFF.
SYNOPSIStificc [options] input.tif output.tif
DESCRIPTION
lcms is a standalone CMM engine, which deals with the color management.
It implements a fast transformation between ICC profiles. tificc is a
little cms ICC profile applier for TIFF.
OPTIONS-a Handle channels > 4 as alpha.
-b Black point compensation.
-c NUM Precalculates transform (0=Off, 1=Normal, 2=Hi-res, 3=LoRes)
[defaults to 1].
-d NUM Observer adaptation state (abs.col. only), (0..1.0, float value)
[defaults to 0.0].
-e Embed destination profile.
-g Marks out-of-gamut colors on softproof.
-h NUM Show summary of options and examples (0=help, 1=Examples,
2=Built-in profiles, 3=Contact information)
-i profile
Input profile (defaults to sRGB).
-k inklimit
Ink-limiting in % (CMYK only), (0..400.0, float value) [default
400.0].
-l profile
Transform by device-link profile.
-m TODO: check if values outside 0..3 are possible
SoftProof intent [defaults to 0].
-n Ignore embedded profile on input.
-o profile
Output profile (defaults to sRGB).
-p profile
Soft proof profile.
-s newprofile
Save embedded profile as newprofile.
-t NUM Rendering intent
0=Perceptual [default]
1=Relative colorimetric
2=Saturation
3=Absolute colorimetric
10=Perceptual preserving black ink
11=Relative colorimetric preserving black ink
12=Saturation preserving black ink
13=Perceptual preserving black plane
14=Relative colorimetric preserving black plane
15=Saturation preserving black plane
-v Verbose.
-w NUM Output depth (8, 16 or 32). Use 32 for floating-point.
BUILT-IN PROFILES
*Lab2 -- D50-based v2 CIEL*a*b
*Lab4 -- D50-based v4 CIEL*a*b
*Lab -- D50-based v4 CIEL*a*b
*XYZ -- CIE XYZ (PCS)
*sRGB -- sRGB color space
*Gray22 - Monochrome of Gamma 2.2
*Gray30 - Monochrome of Gamma 3.0
*null - Monochrome black for all input
*Lin2222- CMYK linearization of gamma 2.2 on each channel
EXAMPLES
To color correct from scanner to sRGB:
tificc-iscanner.icm in.tif out.tif
To convert from monitor1 to monitor2:
tificc-imon1.icm -omon2.icm in.tif out.tif
To make a CMYK separation:
tificc-oprinter.icm inrgb.tif outcmyk.tif
To recover sRGB from a CMYK separation:
tificc-iprinter.icm incmyk.tif outrgb.tif
To convert from CIELab TIFF to sRGB
tificc -i*Lab in.tif out.tif
NOTES
For suggestions, comments, bug reports etc. send mail to info@lit‐
tlecms.com.
SEE ALSOjpgicc(1), linkicc(1), psicc(1), transicc(1)AUTHOR
This manual page was originally written by Shiju p. Nair
<shiju.p@gmail.com>, for the Debian project. Modified by Marti Maria to
reflect further changes.
October 23, 2004 TIFICC(1)
