TSEC(4) OpenBSD Programmer's Manual (SOCPPC) TSEC(4)NAMEtsec - three-speed 10/100/Gigabit Ethernet device
SYNOPSIS
tsec0 at obio? addr 0x24000 ivec 32
tsec1 at obio? addr 0x25000 ivec 35
rgephy* at mii?
gentbi* at mii?
DESCRIPTION
The tsec driver provides support for the three-speed Ethernet controller
(TSEC) found on the Freescale MPC8349E processor family. It uses an
external PHY or an internal 10-bit interface.
The tsec driver supports several media types, which are selected via the
ifconfig(8) command. The supported media types are:
media autoselect
Attempt to autoselect the media type (default)
media 1000baseT mediaopt full-duplex
Use 1000baseT on copper, full duplex
media 1000baseT [mediaopt half-duplex]
Use 1000baseT on copper, half duplex
media 1000baseSX mediaopt full-duplex
Use 1000baseSX on fiber, full duplex
media 1000baseSX [mediaopt half-duplex]
Use 1000baseSX on fiber, half duplex
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex
SEE ALSOarp(4), gentbi(4), ifmedia(4), inet(4), intro(4), netintro(4), rgephy(4),
hostname.if(5), ifconfig(8)HISTORY
OpenBSD support for tsec first appeared in OpenBSD 4.4.
AUTHORS
The tsec driver was written by Mark Kettenis <kettenis@openbsd.org>.
OpenBSD 4.9 January 28, 2009 OpenBSD 4.9