upssched man page on DragonFly

Printed from http://www.polarhome.com/service/man/?qf=upssched&af=0&tf=2&of=DragonFly

UPSSCHED(8)			  NUT Manual			   UPSSCHED(8)

NAME
       upssched - Timer helper for scheduling events from upsmon

SYNOPSIS
       upssched

	   Note
	   upssched should be run from upsmon(8) via the NOTIFYCMD. You should
	   never run it directly during normal operations.

DESCRIPTION
       upssched was created to allow users to execute programs at times
       relative to events being monitored by upsmon(8). The original purpose
       was to allow for a shutdown to occur after some fixed period on
       battery, but there are other uses that are possible.

INTEGRATION
       upssched needs to be called as the NOTIFYCMD in your upsmon.conf(5). It
       determines what is happening based on the UPSNAME and NOTIFYTYPE
       environment variables. You should never have to deal with them
       directly.

       Set the EXEC flag on the events that you want to see in upssched. For
       example, to make sure that upssched hears about ONLINE, ONBATT and
       LOWBATT events, the flags would look like this:

	   NOTIFYFLAG ONLINE EXEC
	   NOTIFYFLAG ONBATT EXEC
	   NOTIFYFLAG LOWBATT EXEC

       If you also want to continue writing to the syslog, just add it in:

	   NOTIFYFLAG ONLINE SYSLOG+EXEC
	   NOTIFYFLAG ONBATT SYSLOG+EXEC
	   NOTIFYFLAG LOWBATT SYSLOG+EXEC

       For a full list of notify flags, see the upsmon(8) documentation.

CONFIGURATION
       See upssched.conf(5) for information on configuring this program.

EARLY SHUTDOWNS
       To shut down the system early, define a timer that starts due to an
       ONBATT condition. When it triggers, make your CMDSCRIPT call your
       shutdown routine. It should finish by calling upsmon -c fsd so that
       upsmon gets to shut down the slaves in a controlled manner.

       Be sure you cancel the timer if power returns (ONLINE).

DEBOUNCING EVENTS
       If your UPS goes on and off battery frequently, you can use this
       program to reduce the number of pager messages that are sent out.
       Rather than sending pages directly from upsmon(8), use a short timer
       here. If the timer triggers with the UPS still on battery, then send
       the page. If the power returns before then, the timer can be cancelled
       and no page is necessary.

BACKGROUND
       This program was written primarily to fulfill the requests of users for
       the early shutdown scenario. The "outboard" design of the program
       (relative to upsmon) was intended to reduce the load on the average
       system. Most people don’t have the requirement of shutting down after N
       seconds on battery, since the usual OB+LB testing is sufficient.

       This program was created separately so those people don’t have to spend
       CPU time and RAM on something that will never be used in their
       environments.

       The design of the timer handler is also geared towards minimizing
       impact. It will come and go from the process list as necessary. When a
       new timer is started, a process will be forked to actually watch the
       clock and eventually start the CMDSCRIPT. When a timer triggers, it is
       removed from the queue. Cancelling a timer will also remove it from the
       queue. When no timers are present in the queue, the background process
       exits.

       This means that you will only see upssched running when one of two
       things is happening:

       ·   There’s a timer of some sort currently running

       ·   upsmon just called it, and you managed to catch the brief instance

       The final optimization handles the possibility of trying to cancel a
       timer when there are none running. If the timer daemon isn’t running,
       there are no timers to cancel, and furthermore there is no need to
       start a clock-watcher. So, it skips that step and exits sooner.

FILES
       upssched.conf(5)

SEE ALSO
       upsmon(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools 2.7.3		  04/17/2015			   UPSSCHED(8)
[top]

List of man pages available for DragonFly

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net