USB_MID(7D)USB_MID(7D)NAMEusb_mid - USB Multi Interface Driver
SYNOPSIS
device@unit-address
DESCRIPTION
The usb_mid driver is a USBA (Solaris Universal Serial Bus Architec‐
ture)-compliant nexus driver that binds to device level nodes of a
composite (multi interface) device if no vendor or class-specific
driver is available. The usb_mid driver creates interface nodes or
interface association nodes and attempts to bind drivers to them. If no
driver is found for interface association nodes, usb_ia(7D) is bound by
default.
UGEN (Generic USB)
The usb_mid driver also supports a ugen(7D) interface allowing raw
access to the device, for example by libusb(3LIB) applications, by
passing the drivers bound to each interface. Since a libusb application
might change the state of the device, you should not access the device
through the child interface drivers. Note that the usb_mid driver cre‐
ates a ugen interface only if none of its children are explicitly bound
to the ugen(7D) driver. Additionally, usb_mid does not create children.
FILES
/kernel/drv/usb_mid
32-bit x86 ELF kernel module
/kernel/drv/amd64/usb_mid
64-bit x86 ELF kernel module
/kernel/drv/sparcv9/usb_mid
64-bit SPARC ELF kernel module
/dev/usb/*/*/*
ugen(7D) nodes.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌───────────────┬────────────────────────────────┐
│ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├───────────────┼────────────────────────────────┤
│Architecture │ SPARC & x86, PCI-based systems │
└───────────────┴────────────────────────────────┘
SEE ALSOcfgadm_usb(1M), libusb(3LIB), attributes(5), usba(7D), usb_ia(7D)
Writing Device Drivers
Universal Serial Bus Specification 2.0—2000
Interface Association Descriptor Engineering Change Notice (ECN)—2003
System Administration Guide: Basic Administration
http://www.sun.com/io
DIAGNOSTICS
In addition to being logged, the following messages may appear on the
system console. All messages are formatted in the following manner:
Warning: <device path> (usb_mid<instance number>): Error Message...
Cannot access <device>. Please reconnect.
This device has been disconnected because a device other than the
original one has been inserted. The driver informs you of this fact
by displaying the name of the original device.
Device not identical to the previous one on this port. Please discon‐
nect and reconnect.
Same condition as described above; however in this case, the driver
is unable to identify the original device with a name string.
Please disconnect and reconnect this device.
A hotplug of the device is needed before it can be restored.
The following messages may be logged into the system log. They are for‐
matted in the following manner:
<device path><usb_mid<instance number>): message...
No driver found for interface <n> (nodename: <string>) of <device>.
No driver is available for this interface.
No driver found for device <device>.
No driver is available for this interface.
Can't support ugen for multiple configuration devices that have
attached child interface drivers.
No ugen interface is available and libusb(3LIB) cannot work with
this device.
Dec 22, 2006 USB_MID(7D)
