wait man page on NetBSD

Man page or keyword search:  
man Server   9087 pages
apropos Keyword Search (all sections)
Output format
NetBSD logo
[printable version]

WAIT(2)			    BSD System Calls Manual		       WAIT(2)

NAME
     wait, waitpid, wait4, wait3 — wait for process termination

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <sys/wait.h>

     pid_t
     wait(int *status);

     pid_t
     waitpid(pid_t wpid, int *status, int options);

     #include <sys/resource.h>

     pid_t
     wait3(int *status, int options, struct rusage *rusage);

     pid_t
     wait4(pid_t wpid, int *status, int options, struct rusage *rusage);

DESCRIPTION
     The wait() function suspends execution of its calling process until
     status information is available for a terminated child process, or a sig‐
     nal is received.  On return from a successful wait() call, the status
     area contains termination information about the process that exited as
     defined below.

     The wait4() call provides a more general interface for programs that need
     to wait for certain child processes, that need resource utilization sta‐
     tistics accumulated by child processes, or that require options.  The
     other wait functions are implemented using wait4().

     The wpid parameter specifies the set of child processes for which to
     wait.  If wpid is -1, the call waits for any child process.  If wpid is
     0, the call waits for any child process in the process group of the call‐
     er.  If wpid is greater than zero, the call waits for the process with
     process id wpid.  If wpid is less than -1, the call waits for any process
     whose process group id equals the absolute value of wpid.

     The status parameter is defined below.

     The options parameter contains the bitwise OR of any of the following
     options:

     WNOHANG	This option is used to indicate that the call should not block
		if there are no processes that wish to report status.

     WUNTRACED	If this option is set, children of the current process that
		are stopped due to a SIGTTIN, SIGTTOU, SIGTSTP, or SIGSTOP
		signal also have their status reported.

     WALTSIG	If this option is specified, the call will wait only for pro‐
		cesses that are configured to post a signal other than SIGCHLD
		when they exit.	 If WALTSIG is not specified, the call will
		wait only for processes that are configured to post SIGCHLD.

     __WCLONE	This is an alias for WALTSIG.  It is provided for compatibil‐
		ity with the Linux clone(2) API.

     WALLSIG	If this option is specified, the call will wait for all chil‐
		dren regardless of what exit signal they post.

     __WALL	This is an alias for WALLSIG.  It is provided for compatibil‐
		ity with the Linux clone(2) API .

     If rusage is non-zero, a summary of the resources used by the terminated
     process and all its children is returned (this information is currently
     not available for stopped processes).

     When the WNOHANG option is specified and no processes wish to report sta‐
     tus, wait4() returns a process id of 0.

     The waitpid() call is identical to wait4() with an rusage value of zero.
     The older wait3() call is the same as wait4() with a wpid value of -1.

     The following macros may be used to test the manner of exit of the
     process.  Note that these macros expect the status value itself, not a
     pointer to the status value.  One of the first three macros will evaluate
     to a non-zero (true) value:

     WIFEXITED(status)
	     True if the process terminated normally by a call to _exit(2) or
	     exit(3).

     WIFSIGNALED(status)
	     True if the process terminated due to receipt of a signal.

     WIFSTOPPED(status)
	     True if the process has not terminated, but has stopped and can
	     be restarted.  This macro can be true only if the wait call spec‐
	     ified the WUNTRACED option or if the child process is being
	     traced (see ptrace(2)).

     Depending on the values of those macros, the following macros produce the
     remaining status information about the child process:

     WEXITSTATUS(status)
	     If WIFEXITED(status) is true, evaluates to the low-order 8 bits
	     of the argument passed to _exit(2) or exit(3) by the child.

     WTERMSIG(status)
	     If WIFSIGNALED(status) is true, evaluates to the number of the
	     signal that caused the termination of the process.

     WCOREDUMP(status)
	     If WIFSIGNALED(status) is true, evaluates as true if the termina‐
	     tion of the process was accompanied by the creation of a core
	     file containing an image of the process when the signal was
	     received.

     WSTOPSIG(status)
	     If WIFSTOPPED(status) is true, evaluates to the number of the
	     signal that caused the process to stop.

NOTES
     See sigaction(2) for a list of termination signals.  A status of 0 indi‐
     cates normal termination.

     If a parent process terminates without waiting for all of its child pro‐
     cesses to terminate, the remaining child processes are assigned the par‐
     ent process 1 ID (the init process ID).

     If a signal is caught while any of the wait() calls is pending, the call
     may be interrupted or restarted when the signal-catching routine returns,
     depending on the options in effect for the signal; see intro(2), System
     call restart.

RETURN VALUES
     If wait() returns due to a stopped or terminated child process, the
     process ID of the child is returned to the calling process.  Otherwise, a
     value of -1 is returned and errno is set to indicate the error.

     If wait4(), wait3() or waitpid() returns due to a stopped or terminated
     child process, the process ID of the child is returned to the calling
     process.  If there are no children not previously awaited, -1 is returned
     with errno set to [ECHILD].  Otherwise, if WNOHANG is specified and there
     are no stopped or exited children, 0 is returned.	If an error is
     detected or a caught signal aborts the call, a value of -1 is returned
     and errno is set to indicate the error.

ERRORS
     wait() will fail and return immediately if:

     [ECHILD]		The calling process has no existing unwaited-for child
			processes.

     [EFAULT]		The status or rusage arguments point to an illegal
			address.  (May not be detected before exit of a child
			process.)

     [EINTR]		The call was interrupted by a caught signal, or the
			signal did not have the SA_RESTART flag set.

     In addition, wait3(), wait4(), and waitpid() will fail and return immedi‐
     ately if:

     [EINVAL]		An invalid value was specified for options.

SEE ALSO
     _exit(2), sigaction(2)

STANDARDS
     The wait() and waitpid() functions conform to ISO/IEC 9945-1:1990
     (“POSIX.1”); the wait3() function conforms to X/Open Portability Guide
     Issue 4 (“XPG4”); wait4() is an extension.	 The WCOREDUMP() macro and the
     ability to restart a pending wait() call are extensions to the POSIX
     interface.

HISTORY
     A wait() function call appeared in Version 2 AT&T UNIX.

BSD				 April 3, 2010				   BSD
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server NetBSD

List of man pages available for NetBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net