X10SCHED(5)X10SCHED(5)NAMEx10sched - layout of the x10.sched file for the X-10 CM11A serial
interface
DESCRIPTION
heyu supports uploading a schedule of events to your CM11A interface.
The schedule file (by default named "x10.sched") allows you to specify
when you want X10 commands to be sent to X10 modules throughout your
home. It also allows you to translate some X10 codes to other codes.
More on that below.
The X-10 CM11A connects to a computer with an RS232 interface. It can
store about 128 events; each event can do things like turn on, turn
off, or dim up to sixteen X10 modules. The CM11A box has a battery
backed clock which the computer can read. The event data is stored in
EEPROM memory. After a schedule is uploaded, the CM11A can be discon‐
nected from the computer and even plugged in elsewhere in the house if
desired.
There are three important concepts used in the x10sched file. They are
timers, triggers and macros. They all work together, in fact, the
timers and triggers execute macros.
The TIMER determines the date and time that a macro will be executed.
Once a minute the CM11A looks at its internal table (frequently
referred to as the EEPROM) to see if it´s time to do anything. Timers
can be restricted to certain days of the week or ranges of dates, or
both.
The TRIGGER represents real time actions. When the CM11A sees a power‐
line signal it compares the command with its table of triggers (also
known as "macro initiators") and executes the appropriate macro. Trig‐
gers can be used to cause many actions when one remote control button
is pushed.
The MACRO consists of a label, an optional delay and a list of com‐
mands. Each macro can have up to 255 commands. The delay can be from
0 to 240 minutes. Macro labels can be significant. They can remind
you of what it is supposed to do or it can remind you what triggers it.
The label turn_c5_on_now leaves nothing to be imagined.
There is no command that will dump the contents of the CM11A EEPROM to
the serial port. This makes it impossible to alter discrete events or
macros unless the entire table is known. This means that we can´t set
the macros using another program (ActiveHome(TM), for instance) and
then add a new macro from Heyu.
The timers and macros are stored in a file, by default in the same
directory as the configuration file x10config. (See x10config(5)). The
default file name for the schedule file is x10.sched. You can override
the defaults by specifying the filename in the configuration file
"x10config" with the SCHEDULE_FILE directive. (It must be stored in the
same directory as the configuration file.) You can also override the
defaults by providing a fully qualified pathname in the environment
variable X10SCHED or with the "-s" command line switch.
The macro upload function will not work without a schedule file.
Comments and blank lines are allowed in the file to make it more read‐
able. White space is normally ignored.
FILE FORMAT
Refer to the sample file (x10.sched.sample) that came with the source
code to help in understanding this section.
There is no prescribed order for timer, trigger, macro, and comment
lines in the schedule file - they may be grouped by type or mixed, at
the user´s option.
The following are case-sensitive: X10 commands; macro labels; labels
for aliases, scenes, and usersyns as defined in the config file.
Housecode letters are not case-sensitive, nor is the day-of-week mask
or any of the keywords used in the schedule file, e.g. TIMER, timer,
tiMer are all equivalent.
comment
As of version 2.0, anything on a line following a pound sign (#)
is treated as a comment and is ignored by Heyu. Note that for
versions of Heyu earlier than 2.0, a pound sign anywhere other
than as the first character on a line was treated as a normal
character and NOT treated as beginning a comment.
section
Any line beginning with the keyword section is totally ignored
by Heyu, just as if it were a comment line. It is provided to
enable user-defined breakpoints for external programs or scripts
which might be devised by the user to reorganize a schedule
file, and where use of ordinary comment lines for this purpose
might be confusing.
blank Blank lines are skipped over.
timer The timer line consists of 7 required items. They are: the lit‐
eral string timer (which is not case-sensitive), a day of week
mask, the begin and end date range, the start time, the stop
time, the start macro and the stop macro. In addition to these,
there are several timer options which can be appended to the
line.
The day of week mask (DOW) is a 7 character field. Each posi‐
tion represents a day of the week when the timer should work. A
timer that should execute every day is represented by the string
"smtwtfs". To deactivate a timer for any chosen day of the
week, substitute a period ´.´ for the appropriate letter.
For instance, to activate a timer for Monday, Thursday and Sat‐
urday, you´d use the following string: ".m..t.s" (without the
quotes).
The DOW mask is combined with the date when the CM11A checks to
see if it should execute a timer. Both date and DOW must match
for the timer to execute.
The begin-end range is a pair of month and day dates separated
by a hyphen ´-´ or by a colon ´:´. The first date represents
when to begin, and the second represents when to end. The range
is inclusive.
The order in which month and day appear in each date must agree
with the order specified with config directive DATE_FORMAT (or
its default), for example with the default ´DATE_FORMAT YMD´,
the date range would be entered as mm/dd-mm/dd, whereas for
´DATE_FORMAT DMY´ it would be entered as dd/mm-dd/mm. The sepa‐
rator between month and day may any of the separators which can
optionally be specified with DATE_FORMAT, namely ´/´, ´-´, or
´.´. It does not have to be the same one.
A single date can be specified by using the same values for the
begin and end dates. Older versions of Heyu required that the
begin date be less than or equal to the end date. Beginning
with version 2.0, Heyu will interpret a begin date later than
the end date as meaning the date range wraps around at the end
of the year into the beginning of the year (including the cur‐
rent year).
Examples:
You would use 01/01-12/31 to indicate a timer that should be run
daily.
The range 12/01-02/01 is equivalent to the two ranges
12/01-12/31 and 01/01-02/01
With DATE_FORMAT DMY, the above range could be specified as
01-12:01-02, 01.12-01.02, or 01/12-01/02
For a date range involving the last day of February, see the
description of the FEB_KLUGE directive in x10config(5).
Beginning with Heyu version 2.0, the effective date range of an
uploaded schedule can be configured to span years. A schedule
uploaded at any time during the year can be configured to oper‐
ate correctly for a period of from 1 to 366 days beginning on
the upload date. So for example, a schedule uploaded on Septem‐
ber 1st can be configured to run correctly and continually
through September 1st (or 2nd) of the following year. For more
information, see the descriptions for the MODE and PROGRAM_DAYS
directives in the x10config(5) man file, in particular "HEYU"
mode versus "COMPATIBLE" mode.
Regardless of the above directives, the user would normally pro‐
gram the schedule for the entire year. (Envision the schedule
as being repeated for each year, past, present, and future.)
When compiling for upload, Heyu automatically selects whatever
parts of it are to be used in accordance with those directives
and adjusts dates and times for Leap Years and Daylight Saving
Time as required.
As a special case beginning with Heyu 2.0, the date range
"mm/dd-mm/dd" may optionally be entirely replaced with the
expression "expire-dd", where dd represents the range of dd+1
days ending on the last day of validity of the uploaded sched‐
ule. Thus the CM11A can be programmed to execute some macro as
a reminder to the user that the schedule will shortly need to be
reloaded. Note that in COMPATIBLE mode, reloading the schedule
before Jan 1st will not accomplish anything, as the exact same
schedule will be loaded.
The start and stop times are in hh:mm format (hour:minutes 24
hour clock) You don´t have to use two digits, 1:5 will work
just fine for 5 minutes after 1 AM.
The start macro and stop macro will be executed when their
respective time is reached. Note that these are really unre‐
lated and independant timers, and that the start macro is not
restricted to turning things on and that the stop macro does not
have to control the same X10 modules as the start macro. Either
the start or stop macro can be the macro named "null" which is a
dummy macro - it´s never executed and thus does nothing.
The macros referenced in the timer must be defined somewhere in
the file. The schedule upload will abort if a macro is missing
or mis-typed. (A warning will be issued if a macro is not refer‐
enced by any timer or trigger.)
With versions of Heyu prior to 2.0, times for events had to be
programmed separately for dates when Standard Time and Daylight
Time were in effect. Beginning with version 2.0, the user pro‐
grams times for all events in legal (i.e., wall clock) time, and
Heyu makes the necessary internal adjustment for the changeovers
from Daylight -> Standard and vice-versa. The CM11A clock is
maintained on Standard Time year around, transparent to the
user.
Also new with version 2.0 is the ability to directly specify
times relative to Dawn and Dusk. (A separate program was sup‐
plied with earlier versions to do this.) Instead of the time
expressed as "hh:mm", one can now use the format "dawn+mm" or
"dawn-mm" or "dusk+mm" or "dusk-mm" (or just "dawn" or "dusk").
Heyu calculates the times of Dawn and/or Dusk and makes the sub‐
stitution. The "mm" represents the number of minutes before or
after Dawn/Dusk when the macro will be executed. "mm" can have
any value, _except_ that the resulting time after resolving the
times of Dawn/Dusk must fall within the range 00:00 to 23:59 or
Heyu will quit with an error message.
Dawn and Dusk are defined by default to be synonymous with sun‐
rise and sunset. However this definition may be _globally_
changed to one or another of the standard twilight times, or to
a user specified Sun position, with the configuration file
directive DAWNDUSK_DEF. See man page x10config(5).
When Heyu processes Dawn or Dusk related events, it subdivides
the programmed date range into a number of unequal-length subin‐
tervals, each of which is assigned a constant time approximating
the time of Dawn or Dusk over the subinterval. The number and
lengths of these subintervals are chosen by an iterative proce‐
dure which minimizes the deviation from actual Dawn/Dusk times
subject to the constraint of available EEPROM memory in the
CM11A. (As a result, if Dawn and/or Dusk related event times are
programmed, the amount of free EEPROM memory displayed will gen‐
erally be pretty small. If more timers are added to the sched‐
ule they'll fit - within limits of course - but the deviation in
the Dawn/Dusk times will be higher.)
The Dawn or Dusk "error" reported by Heyu is the difference in
minutes between the maximum and minimum times of daily Dawn or
Dusk over the above-mentioned subinterval. Whether this error
in the constant time approximation on any particular day is plus
or minus or mixed is determined by the DAWN_OPTION or
DUSK_OPTION configuration directive.
Heyu requires that every day have a Dawn and a Dusk, which is
not the case in polar latitudes when the sun may be above or
below the horizon all day, or when Dawn or Dusk is shifted into
the previous or following day.
To compensate, Heyu uses a ficticious Dawn and/or Dusk at 00:01
or 23:58 hours Standard Time (not necessarily repectively) as
the situation dictates. So for example in polar mid-summer,
Heyu will represent the day as occurring between 00:01 and
23:58, while in polar mid-winter, the night will be considered
to occur between those times.
To activate the so-called "security" feature of the CM11A, sim‐
ply append the letter ´S´ to the programmed start or stop time
in question. "12:00s", "dawn+5s", "duskS" are valid examples of
this. The time of the event will then vary each day by some
random amount within +/- 30 minutes of the programmed time.
Note that the CM11A itself actually applies a variation of
between +0 and +60 minutes to the programmed time. Heyu sub‐
tracts 30 minutes from the programmed event time to get the +/-
30 minute variation.
Heyu has to use a few tricks with the security feature when
clock times around midnight are programmed, in particular when
the programmed time is between 22:59 and 01:30 (assuming Day‐
light Time is in effect at some time during the year in your
locality), since the CM11A must be allowed to add a random time
between 0 and 60 minutes at any time of the year without exceed‐
ing 23:59. To get around this, Heyu changes the programmed
event time for the timer to 22:59 and creates an appropriately
delayed macro.
But this solution has its own problem, namely that if a delayed
macro does not execute until the following day, it will not be
executed at all on the day the schedule is uploaded. To get
around this, Heyu uses a non-delayed macro and creates a new
one-day-only timer event with its own +/- 30 minute randomly
generated variation around the user´s original programmed time.
In order to test the operation of a schedule without having to
wait around all day, Heyu version 2.0 will acccept the construct
"now" or "now+NN" (with NN in minutes) in place of a start time
and/or stop time in a timer. It will then substitute the cur‐
rent system time rounded up to the next whole minute, with a
minimum of 15 seconds allowed for uploading the schedule. NN
must be >= zero, otherwise the only restriction is that the
resolved value of "now+NN" must not exceed 23:59. The security
feature may not be used with the "now+NN" construct. Note that
the date range and DOW mask must include today if the macro is
actually expected to be executed today. Example:
timer smtwtfs 01/01-12/31 now now+2 lights_on lights_off
Beginning with Heyu version 2.0, the reserved macro label "null"
may be used as a "do-nothing" place holder in a timer, when nei‐
ther of the timer concepts start or stop seem logically appro‐
priate. (The null macro may be used liberally as required - it
will take up no more space in the CM11A´s EEPROM memory than if
the user manually rearranged timer start and stop events solely
to have something to "fill in the blank".)
timer options
There are four timer options which can be used to restrict the
execution of a timer only to days when the actual times of Dawn
or Dusk during the year are less than (LT) or greater than (GT)
the time specified with the option. The option keyword and time
are appended to the end of the normal timer line.
DAWNLT hh:mm - Execute only on days when Dawn occurs before
hh:mm
DAWNGT hh:mm - Execute only on days when Dawn occurs after
hh:mm
DUSKLT hh:mm - Execute only on days when Dusk occurs before
hh:mm
DUSKGT hh:mm - Execute only on days when Dusk occurs after
hh:mm
where hh:mm is expressed as legal (i.e. wall-clock) time.
Example:
timer smtwtfs 01/01-12/31 dusk 21:00 light_on light_off
DUSKLT 21:00
This would result in the light being turned ON at dusk, OFF at
9:00 PM, but only on days when Dusk occurs earlier than 9:00 PM.
Thus in extreme latitudes when Dusk might occur later than 9:00
PM during the summer months, the situation is avoided where the
light is turned ON at Dusk and remains ON all night and all the
next day until 9:00 PM.
The timer options are not restricted to timers which involve
Dawn or Dusk times. The above timer could just as well have
been programmed as two separate timers:
timer smtwtfs 01/01-12/31 dusk 00:00 light_on null DUSKLT
21:00
timer smtwtfs 01/01-12/31 21:00 00:00 light_off null DUSKLT
21:00
The time argument for the option does not have to be the same as
the execution time of the timer. In the above example it might
seems silly to have the light come ON for only a few minutes on
days when Dusk started to approach 9:00 PM, so one could use
DUSKLT 20:50 to ignore the days when the light might otherwise
be ON for less than 10 minutes.
More than one timer option can be used with a timer - all four
in fact if deemed appropriate. Just string them together at the
end of the timer line. The string ... DUSKGT 19:00 DUSKLT
21:00 would result in the timer being restricted to execute only
on days when Dusk occurs between 7:00 PM and 9:00 PM.
Please note that the CM11A interface has no capability for con‐
ditional logic - Heyu merely compares the option time argument
with the calculated Dawn or Dusk time for each day of the year
and breaks up the date interval into multiple intervals.
trigger
The trigger line consists of only 4 items. They are: the lit‐
eral string trigger, the trigger unit, the command and the
macro.
The trigger unit is a combination of house code (a letter from
a-p) and a unit number (from 1 to 16). An example is d12.
The command will be either the word on or the word off. The
CM11A will not trigger on any other type of X10 signal.
The macro refers to a macro that will be executed. The macro
must be defined somewhere in the file.
macro
The macro line consists of 3 or 4 items. They are: the lit‐
eral string macro, the label, an optional delay, and a semi‐
colon-separated list of one or more commands or scenes.
The label is plain text of up to 32 characters which must be
contiguous, and must be of printable characters. It must not
begin with the characters ´+´, ´-´ or ´_´, and it must not con‐
tain the ´$´ character. The label is used by the timers and
triggers to find the correct macro.
When Heyu uploads a schedule, it write the macro names and EEP‐
ROM memory locations in file "x10macroxref" in the Heyu base
directory, i.e., the directory where the configuration file is
located. This file is used by the Heyu monitor to translate
macro memory location to readable macro names as they are exe‐
cuted, so should not be deleted.
The delay can be from 0 to 240 minutes long. It is represented
by a simple cardinal number; no fractions, signs or decimals.
However see the section "Problems with delayed macros" below.
The Commands can be of several types; on, off, dim or bright
being the most commonly used. The on and off commands have one
argument, that being the address of the modules to be con‐
trolled. The address can be in the format of house code (hc)
followed immediately by the unit number or range of unit num‐
bers. The following are valid: d1 d1,2,3,9 d1-4,6
config
A limited subset of configuration directives may appear in the
schedule file when preceded by the word ´config´, and will over‐
ride the values of those same directives in the configuration
file (or their default values). This feature is intended for
use if you upload schedules requiring different configurations
on a frequent basis, so you don´t have to keep changing the con‐
figuration file every time. For most users however there´s less
chance of confusion by relying only on the directives as speci‐
fied in the configuration file.
The subset of directives includes only those which directly
influence how Heyu processes the timers, triggers, and macros to
create the uploaded EEPROM image, to wit: MODE, PROGRAM_DAYS,
LATITUDE, LONGITUDE, COMBINE_EVENTS, COMPRESS_MACROS, DAWN‐
DUSK_DEF, DAWN_OPTION, DUSK_OPTION, MIN_DAWN, MAX_DAWN,
MIN_DUSK, MAX_DUSK, ASIF_DATE, ASIF_TIME, DATE_FORMAT,
WRITE_CHECK_FILES, REPL_DELAYED_MACROS, FEB_KLUGE, RESOLVE_OVER‐
LAP. See x10config(5) if necessary for an explanation of these
directives. Heyu will quit with an error message if directives
other than these are specified in the schedule file.
Configuration directive lines in the schedule file always apply
to the schedule as a whole regardless of where they appear in
the file. It´s good practise however to put them all at the
beginning of the file so you won´t overlook them later on and
get confused.
Example:
config program_days 90
COMMANDS
In addition to the on, off, dim, and bright commands, Heyu version 2
adds others which can be used for uploadable macros in schedules,
including Extended commands for modules like the X-10 LM14A 2-way lamp
module. Run ´heyu help´ for a complete list of commands implemented in
the current version of Heyu. All the native X10 commands _except_ the
Preset command may be used for uploaded macros. (The command ´mpreset´
implements the very limited support for Preset in uploaded macros pro‐
vided by the CM11A firmware.)
Heyu version 2 includes built-in synonyms for many of the commonly used
commands. Run ´heyu syn´ to see these synonyms.
Heyu version 2 also includes the ability for users to define their own
synonyms ("usersyns") and/or compound commands ("scenes") in the con‐
figuration file, and use them in macros.
X10 commands are generally transmitted over the power line in two
"chunks", a series of address bytes, one for each unit, followed by one
or more function bytes. Both the address byte and the function byte
reference the housecode (except for the ´preset´ command, which has a
peculiar function byte format).
For some commands, the unit information contained in the address byte
is superfluous and the address byte will normally be omitted. Examples
of commands in this category include the "all" commands like ´light‐
son´, and ´alloff´, the ´hail´ command, and any of the Extended com‐
mands (which include the unit code within the function structure).
No unit codes need be appended to the housecode for the "all" commands,
e.g.,
lightson A
alloff C
are sufficient. If a unit is specified with the housecode, it will
normally be ignored. However if for some reason it is desireable for
the command to be issued along with an address byte, prefix the housec‐
ode with a ´+´ sign and add the unit string suffix, e.g.,
lightson +A4
An address byte is not normally sent with the Extended Code commands
like ´xpreset´ even though the unit must be specified. But again, pre‐
fixing the Housecode|Units with a ´+´ sign will instruct Heyu to
include an address byte in the transmission.
For the opposite effect, i.e. to suppress transmission of the address
byte for any command, prefix the Housecode|Units with a ´-´ sign and
omit the units. E.g.,
on -A
A few commands warrant additional description:
xfunc <T/F> HU <xx> - general extended command.
The ´xfunc´ command will transmit any arbitrary extended function <T/F>
and data byte <xx>, where both are assumed to be hexadecimal bytes
(0-0xff).
Example: 0x31 is the function code for the extended preset command, and
the following commands for setting the extended preset level for module
c3 to level 26 (decimal) are equivalent:
xpreset c3 26
xfunc 31 c3 1a
The extended command code functions are described in X-10´s document
xtdcode.pdf (a replacement for the older XTC798.DOC) which is available
for download from their website. The only extended code Types known to
be applicable to existing modules are the Type 3 for extended code
lighting and appliance modules and Type 0 for the Marmitek SW10 Shutter
controller.
Macro commands can be strung together by separating them with a semi‐
colon ´;´. This allows one macro to affect several devices. Consider
the commands needed to turn on the TV (d1) turn off the stereo (d3) and
dim the 4 lights in the living room by half( c1, c2, c3 and c4 dim 11).
This macro command string would do it.
on d1; off d3; dim c1-4 11.
As of Heyu version 2, macros can include scenes defined in the user´s
configuration file as if they were standard Heyu commands. Macros can
also reference aliases defined in the configuration file in place of
the Housecode|Units parameter.
EXAMPLES
In this timer, the macro c5on will be executed once a day at 2:58 PM.
The macro c5off will execute at 2:59 PM.
The timer is active every day of the week from 2/1 through 12/12.
timer smtwtfs 02/01-12/12 14:58 14:59 c5on c5off
The next one only runs on Dec 11, and then only if it falls on a Fri‐
day.
timer .....f. 12/11-12/11 23:34 23:35 d6off d6off
This timer sounds a chime (perhaps a Universal Module UM-506) every day
at Noon, legal (wall clock) time, Monday through Friday, regardless of
whether Standard or Daylight Time is in effect (Heyu ver 2.0 and
later):
timer .mtwtf. 01/01-12/31 12:00 00:00 lunch_chime null
This one sounds a chime at 7 AM and 7 PM 3 days in a row before the
expiration date and on the final date itself (a total of 4 days) to
remind the user that the uploaded schedule will shortly become invalid
and need to be reloaded. (Heyu ver 2.0 and later only):
timer smtwtfs expire-3 07:00 19:00 chime chime
The following two timers turn on an inside hall light 30 minutes before
Dusk, dim it after 11 PM, and turn it off 15 minutes after Dawn (Heyu
ver 2.0 and later):
timer smtwtfs 01/01-12/31 dusk-30 23:00 hall_on hall_dim
timer smtwtfs 01/01-12/31 dawn+15 00:00 hall_off null
The following timer operates decorative lighting between Dusk and 10 PM
during the holiday season without quitting on Jan 1st during non-leap
years (Heyu version 2.0 and later):
timer smtwtfs 12/15-01/02 dusk 22:00 xmas_on xmas_off
This trigger runs macro c5off when ´c1 off´ is received. The net
effect would be that the device with the code c1 will be turned off AND
whatever the macro c5off directs will be done too.
trigger c1 off c5off
In the following, E4 is a dusk sensor (MS13A) outside. It turns on the
living room lamps (via the livinroom_on macro), but it does not turn
them off. I use a timer to do that long before midnight. If I waited
for the MS13A they´d turn off at dawn even if I´m reading my paper
then.
trigger E4 on livinroom_on
This next macro is labeled c5off. It waits 5 minutes, then turns off
d6 and d7 and turns on e2
macro c5off 5 off d6,7; on e2
And this macro includes dimming.
macro c5on 0 on d7; dim d7 8
Since the delay is optional, the above can also be written as:
macro c5on on d7; dim d7 8
Multiple Transmissions
If the Multiple Transmissions box is checked for a timer in X10´s
ActiveHome software, the timer is duplicated with the same macros but
with the execution time set 1 minute later. This is simple enough to
do manually (and with more flexibility) in the schedule file that no
attempt has been made to automate this feature in Heyu.
Problems with delayed macros.
If a new schedule is uploaded between the time a timer or trigger is
activated and the time a delayed macro is executed, the macro will
never be executed because pending delayed macros are purged when a
schedule is loaded. This is the nature of the hardware and is unavoid‐
able. It should never be necessary for the user to program a delayed
macro for a timer, and if Heyu finds one it by default attempts to
adjust to this situation by creating a non-delayed macro and increasing
the time of the timer to compensate. To change Heyu´s behavior, see
the REPL_DELAYED_MACROS directive in x10config(5). (If the same macro
is associated with a trigger, the original delayed macro is uploaded
for the trigger in addition to the new macro for the timer.)
ENVIRONMENT
X10SCHED - Points to a fully qualified file name of your schedule file
(timers, and macros).
AUTHORS
Daniel B. Suthers (dbs@tanj.com)
Charles W. Sullivan (cwsulliv01@heyu.org)
SEE ALSO
http://www.heyu.org
date(1), x10config(5), heyu(1), x10.sched.sample
local X10SCHED(5)
