XPP_SYNC(8) User Contributed Perl Documentation XPP_SYNC(8)NAMExpp_sync - Handle sync selection of Xorcom Astribanks.
SYNOPSISxpp_sync <auto|dahdi|nn>
xpp_sync [-v]
DESCRIPTION
On a normal operation one Astribank device provides timing for all the
other Astribank devices.
When run without parameters, xpp_sync will display a list of Astribanks
(xbuses) that are connected and registered as Dahdi spans. The current
xpp sync master will be marked.
If you this an Astribank is connected and yet it does not appear on the
output of xpp_sync, it may be unregistered. Try running
dahdi_registration .
Parameters
auto
Automatically selects the best Astribank for syncing.
dahdi
Gets synchronization from the Dahdi sync master.
nn Sets XBUS-nn as sync source.
-v Also print the numeric xpp sync rank.
(Parameter name is case-insensitive)
Example output:
Setting SYNC
Current sync: 01
Best Available Syncers:
+ XBUS-01 (usb-0000:00:10.4-3) [usb:12345678] [ PRI_TE PRI_NT PRI_TE PRI_NT ]
XBUS-00 (usb-0000:00:10.4-2) [usb:QA-01] [ FXS FXO ]
==================================================
WARNING: FXO which is not the syncer cause bad PCM
Affected Astribanks are:
--------------------------------------------------
XBUS-00
==================================================
In this example we see that the recommended xpp sync master is XBUS-02
- it is the first on the list. It is also the actual syncer, as we can
see from the '+' beside it.
xpp_sync is normally called from the dahdi init.d script. The
parameter it is called with defaults to auto, but it is possible to
override that parameter (e.g: set it to dahdi) through the value of
XPP_SYNC in /etc/dahdi/init.conf .
FILES
/proc/xpp/sync
(Deprecated: no longer supported) xpp_sync is essentially a nicer
interface to /proc/xpp/sync . That file shows the current xpp sync
master (and in what format you need to write to it to set the
master).
SEE ALSOdahdi_registration(1), dahdi_cfg(1), README.Astribank
perl v5.18.2 2009-09-29 XPP_SYNC(8)
