Apache2::Reload(3) User Contributed Perl Documentation Apache2::Reload(3)NAMEApache2::Reload - Reload Perl Modules when Changed on Disk
Synopsis
# Monitor and reload all modules in %INC:
# httpd.conf:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
# when working with protocols and connection filters
# PerlPreConnectionHandler Apache2::Reload
# Reload groups of modules:
# httpd.conf:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlSetVar ReloadAll Off
PerlSetVar ReloadModules "ModPerl::* Apache2::*"
#PerlSetVar ReloadDebug On
#PerlSetVar ReloadByModuleName On
# Reload a single module from within itself:
package My::Apache2::Module;
use Apache2::Reload;
sub handler { ... }
1;
Description
"Apache2::Reload" reloads modules that change on the disk.
When Perl pulls a file via "require", it stores the filename in the
global hash %INC. The next time Perl tries to "require" the same file,
it sees the file in %INC and does not reload from disk. This module's
handler can be configured to iterate over the modules in %INC and
reload those that have changed on disk or only specific modules that
have registered themselves with "Apache2::Reload". It can also do the
check for modified modules, when a special touch-file has been
modified.
Require-hooks, i.e., entries in %INC which are references, are ignored.
The hook should modify %INC itself, adding the path to the module file,
for it to be reloaded.
"Apache2::Reload" inspects and reloads the file associated with a given
module. Changes to @INC are not recognized, as it is the file which is
being re-required, not the module name.
In version 0.10 and earlier the module name, not the file, is re-
required. Meaning it operated on the the current context of @INC. If
you still want this behavior set this environment variable in
httpd.conf:
PerlSetVar ReloadByModuleName On
This means, when called as a "Perl*Handler", "Apache2::Reload" will not
see @INC paths added or removed by "ModPerl::Registry" scripts, as the
value of @INC is saved on server startup and restored to that value
after each request. In other words, if you want "Apache2::Reload" to
work with modules that live in custom @INC paths, you should modify
@INC when the server is started. Besides, 'use lib' in the startup
script, you can also set the "PERL5LIB" variable in the httpd's
environment to include any non-standard 'lib' directories that you
choose. For example, to accomplish that you can include a line:
PERL5LIB=/home/httpd/perl/extra; export PERL5LIB
in the script that starts Apache. Alternatively, you can set this
environment variable in httpd.conf:
PerlSetEnv PERL5LIB /home/httpd/perl/extra
Monitor All Modules in %INC
To monitor and reload all modules in %INC at the beginning of request's
processing, simply add the following configuration to your httpd.conf:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
When working with connection filters and protocol modules
"Apache2::Reload" should be invoked in the pre_connection stage:
PerlPreConnectionHandler Apache2::Reload
See also the discussion on "PerlPreConnectionHandler".
Register Modules Implicitly
To only reload modules that have registered with "Apache2::Reload", add
the following to the httpd.conf:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlSetVar ReloadAll Off
# ReloadAll defaults to On
Then any modules with the line:
use Apache2::Reload;
Will be reloaded when they change.
Register Modules Explicitly
You can also register modules explicitly in your httpd.conf file that
you want to be reloaded on change:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlSetVar ReloadAll Off
PerlSetVar ReloadModules "My::Foo My::Bar Foo::Bar::Test"
Note that these are split on whitespace, but the module list must be in
quotes, otherwise Apache tries to parse the parameter list.
The "*" wild character can be used to register groups of files under
the same namespace. For example the setting:
PerlSetVar ReloadModules "ModPerl::* Apache2::*"
will monitor all modules under the namespaces "ModPerl::" and
"Apache2::".
Monitor Only Certain Sub Directories
To reload modules only in certain directories (and their
subdirectories) add the following to the httpd.conf:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlSetVar ReloadDirectories "/tmp/project1 /tmp/project2"
You can further narrow the list of modules to be reloaded from the
chosen directories with "ReloadModules" as in:
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlSetVar ReloadDirectories "/tmp/project1 /tmp/project2"
PerlSetVar ReloadAll Off
PerlSetVar ReloadModules "MyApache2::*"
In this configuration example only modules from the namespace
"MyApache2::" found in the directories /tmp/project1/ and
/tmp/project2/ (and their subdirectories) will be reloaded.
Special "Touch" File
You can also declare a file, which when gets touch(1)ed, causes the
reloads to be performed. For example if you set:
PerlSetVar ReloadTouchFile /tmp/reload_modules
and don't touch(1) the file /tmp/reload_modules, the reloads won't
happen until you go to the command line and type:
% touch /tmp/reload_modules
When you do that, the modules that have been changed, will be magically
reloaded on the next request. This option works with any mode described
before.
Unregistering a module
In some cases, it might be necessary to explicitely stop reloading a
module.
Apache2::Reload->unregister_module('Some::Module');
But be carefull, since unregistering a module in this way will only do
so for the current interpreter. This feature should be used with care.
Performance Issues
This module is perfectly suited for a development environment. Though
it's possible that you would like to use it in a production
environment, since with "Apache2::Reload" you don't have to restart the
server in order to reload changed modules during software updates.
Though this convenience comes at a price:
· If the "touch" file feature is used, "Apache2::Reload" has to
stat(2) the touch file on each request, which adds a slight but
most likely insignificant overhead to response times. Otherwise
"Apache2::Reload" will stat(2) each registered module or even
worse--all modules in %INC, which will significantly slow
everything down.
· Once the child process reloads the modules, the memory used by
these modules is not shared with the parent process anymore.
Therefore the memory consumption may grow significantly.
Therefore doing a full server stop and restart is probably a better
solution.
Debug
If you aren't sure whether the modules that are supposed to be
reloaded, are actually getting reloaded, turn the debug mode on:
PerlSetVar ReloadDebug On
Caveats
Problems With Reloading Modules Which Do Not Declare Their Package Name
If you modify modules, which don't declare their "package", and rely on
"Apache2::Reload" to reload them, you may encounter problems: i.e.,
it'll appear as if the module wasn't reloaded when in fact it was. This
happens because when "Apache2::Reload" "require()"s such a module all
the global symbols end up in the "Apache2::Reload" namespace! So the
module does get reloaded and you see the compile time errors if there
are any, but the symbols don't get imported to the right namespace.
Therefore the old version of the code is running.
Failing to Find a File to Reload
"Apache2::Reload" uses %INC to find the files on the filesystem. If an
entry for a certain filepath in %INC is relative, "Apache2::Reload"
will use @INC to try to resolve that relative path. Now remember that
mod_perl freezes the value of @INC at the server startup, and you can
modify it only for the duration of one request when you need to load
some module which is not in on of the @INC directories. So a module
gets loaded, and registered in %INC with a relative path. Now when
"Apache2::Reload" tries to find that module to check whether it has
been modified, it can't find since its directory is not in @INC. So
"Apache2::Reload" will silently skip that module.
You can enable the "Debug|/Debug" mode to see what "Apache2::Reload"
does behind the scenes.
Problems with Scripts Running with Registry Handlers that Cache the Code
The following problem is relevant only to registry handlers that cache
the compiled script. For example it concerns "ModPerl::Registry" but
not "ModPerl::PerlRun".
The Problem
Let's say that there is a module "My::Utils":
#file:My/Utils.pm
#----------------
package My::Utils;
BEGIN { warn __PACKAGE__ , " was reloaded\n" }
use base qw(Exporter);
@EXPORT = qw(colour);
sub colour { "white" }
1;
And a registry script test.pl:
#file:test.pl
#------------
use My::Utils;
print "Content-type: text/plain\n\n";
print "the color is " . colour();
Assuming that the server is running in a single mode, we request the
script for the first time and we get the response:
the color is white
Now we change My/Utils.pm:
- sub colour { "white" }
+ sub colour { "red" }
And issue the request again. "Apache2::Reload" does its job and we can
see that "My::Utils" was reloaded (look in the error_log file). However
the script still returns:
the color is white
The Explanation
Even though My/Utils.pm was reloaded, "ModPerl::Registry"'s cached code
won't run '"use My::Utils;"' again (since it happens only once, i.e.
during the compile time). Therefore the script doesn't know that the
subroutine reference has been changed.
This is easy to verify. Let's change the script to be:
#file:test.pl
#------------
use My::Utils;
print "Content-type: text/plain\n\n";
my $sub_int = \&colour;
my $sub_ext = \&My::Utils::colour;
print "int $sub_int\n";
print "ext $sub_ext\n";
Issue a request, you will see something similar to:
int CODE(0x8510af8)
ext CODE(0x8510af8)
As you can see both point to the same CODE reference (meaning that it's
the same symbol). After modifying My/Utils.pm again:
- sub colour { "red" }
+ sub colour { "blue" }
and calling the script on the secondnd time, we get:
int CODE(0x8510af8)
ext CODE(0x851112c)
You can see that the internal CODE reference is not the same as the
external one.
The Solution
There are two solutions to this problem:
Solution 1: replace "use()" with an explicit "require()" + "import()".
- use My::Utils;
+ require My::Utils; My::Utils->import();
now the changed functions will be reimported on every request.
Solution 2: remember to touch the script itself every time you change
the module that it requires.
Threaded MPM and Multiple Perl Interpreters
If you use "Apache2::Reload" with a threaded MPM and multiple Perl
interpreters, the modules will be reloaded by each interpreter as they
are used, not every interpreters at once. Similar to mod_perl 1.0
where each child has its own Perl interpreter, the modules are reloaded
as each child is hit with a request.
If a module is loaded at startup, the syntax tree of each subroutine is
shared between interpreters (big win), but each subroutine has its own
padlist (where lexical my variables are stored). Once
"Apache2::Reload" reloads a module, this sharing goes away and each
Perl interpreter will have its own copy of the syntax tree for the
reloaded subroutines.
Pseudo-hashes
The short summary of this is: Don't use pseudo-hashes. They are
deprecated since Perl 5.8 and are removed in 5.9.
Use an array with constant indexes. Its faster in the general case, its
more guaranteed, and generally, it works.
The long summary is that some work has been done to get this module
working with modules that use pseudo-hashes, but it's still broken in
the case of a single module that contains multiple packages that all
use pseudo-hashes.
So don't do that.
Copyright
mod_perl 2.0 and its core modules are copyrighted under The Apache
Software License, Version 2.0.
Authors
Matt Sergeant, matt@sergeant.org
Stas Bekman (porting to mod_perl 2.0)
A few concepts borrowed from "Stonehenge::Reload" by Randal Schwartz
and "Apache::StatINC" (mod_perl 1.x) by Doug MacEachern and Ask Bjoern
Hansen.
MAINTAINERS
the mod_perl developers, dev@perl.apache.org
perl v5.14.2 2011-02-02 Apache2::Reload(3)