BerkeleyDB(3) User Contributed Perl Documentation BerkeleyDB(3)NAMEBerkeleyDB - Perl extension for Berkeley DB version 2, 3, 4 or 5
SYNOPSIS
use BerkeleyDB;
$env = new BerkeleyDB::Env [OPTIONS] ;
$db = tie %hash, 'BerkeleyDB::Hash', [OPTIONS] ;
$db = new BerkeleyDB::Hash [OPTIONS] ;
$db = tie %hash, 'BerkeleyDB::Btree', [OPTIONS] ;
$db = new BerkeleyDB::Btree [OPTIONS] ;
$db = tie @array, 'BerkeleyDB::Recno', [OPTIONS] ;
$db = new BerkeleyDB::Recno [OPTIONS] ;
$db = tie @array, 'BerkeleyDB::Queue', [OPTIONS] ;
$db = new BerkeleyDB::Queue [OPTIONS] ;
$db = new BerkeleyDB::Heap [OPTIONS] ;
$db = new BerkeleyDB::Unknown [OPTIONS] ;
$status = BerkeleyDB::db_remove [OPTIONS]
$status = BerkeleyDB::db_rename [OPTIONS]
$status = BerkeleyDB::db_verify [OPTIONS]
$hash{$key} = $value ;
$value = $hash{$key} ;
each %hash ;
keys %hash ;
values %hash ;
$env = $db->Env()
$status = $db->db_get()
$status = $db->db_exists() ;
$status = $db->db_put() ;
$status = $db->db_del() ;
$status = $db->db_sync() ;
$status = $db->db_close() ;
$status = $db->db_pget()
$hash_ref = $db->db_stat() ;
$status = $db->db_key_range();
$type = $db->type() ;
$status = $db->status() ;
$boolean = $db->byteswapped() ;
$status = $db->truncate($count) ;
$status = $db->compact($start, $stop, $c_data, $flags, $end);
$bool = $env->cds_enabled();
$bool = $db->cds_enabled();
$lock = $db->cds_lock();
$lock->cds_unlock();
($flag, $old_offset, $old_length) = $db->partial_set($offset, $length) ;
($flag, $old_offset, $old_length) = $db->partial_clear() ;
$cursor = $db->db_cursor([$flags]) ;
$newcursor = $cursor->c_dup([$flags]);
$status = $cursor->c_get() ;
$status = $cursor->c_put() ;
$status = $cursor->c_del() ;
$status = $cursor->c_count() ;
$status = $cursor->c_pget() ;
$status = $cursor->status() ;
$status = $cursor->c_close() ;
$cursor = $db->db_join() ;
$status = $cursor->c_get() ;
$status = $cursor->c_close() ;
$status = $env->txn_checkpoint()
$hash_ref = $env->txn_stat()
$status = $env->set_mutexlocks()
$status = $env->set_flags()
$status = $env->set_timeout()
$status = $env->lock_detect()
$status = $env->lsn_reset()
$txn = $env->txn_begin() ;
$db->Txn($txn);
$txn->Txn($db1, $db2,...);
$status = $txn->txn_prepare()
$status = $txn->txn_commit()
$status = $txn->txn_abort()
$status = $txn->txn_id()
$status = $txn->txn_discard()
$status = $txn->set_timeout()
$status = $env->set_lg_dir();
$status = $env->set_lg_bsize();
$status = $env->set_lg_max();
$status = $env->set_data_dir() ;
$status = $env->set_tmp_dir() ;
$status = $env->set_verbose() ;
$db_env_ptr = $env->DB_ENV() ;
$BerkeleyDB::Error
$BerkeleyDB::db_version
# DBM Filters
$old_filter = $db->filter_store_key ( sub { ... } ) ;
$old_filter = $db->filter_store_value( sub { ... } ) ;
$old_filter = $db->filter_fetch_key ( sub { ... } ) ;
$old_filter = $db->filter_fetch_value( sub { ... } ) ;
# deprecated, but supported
$txn_mgr = $env->TxnMgr();
$status = $txn_mgr->txn_checkpoint()
$hash_ref = $txn_mgr->txn_stat()
$txn = $txn_mgr->txn_begin() ;
DESCRIPTION
NOTE: This document is still under construction. Expect it to be
incomplete in places.
This Perl module provides an interface to most of the functionality
available in Berkeley DB versions 2, 3 and 4. In general it is safe to
assume that the interface provided here to be identical to the Berkeley
DB interface. The main changes have been to make the Berkeley DB API
work in a Perl way. Note that if you are using Berkeley DB 2.x, the new
features available in Berkeley DB 3.x or DB 4.x are not available via
this module.
The reader is expected to be familiar with the Berkeley DB
documentation. Where the interface provided here is identical to the
Berkeley DB library and the... TODO
The db_appinit, db_cursor, db_open and db_txn man pages are
particularly relevant.
The interface to Berkeley DB is implemented with a number of Perl
classes.
The BerkeleyDB::Env Class
The BerkeleyDB::Env class provides an interface to the Berkeley DB
function db_appinit in Berkeley DB 2.x or db_env_create and DBENV->open
in Berkeley DB 3.x/4.x. Its purpose is to initialise a number of sub-
systems that can then be used in a consistent way in all the databases
you make use of in the environment.
If you don't intend using transactions, locking or logging, then you
shouldn't need to make use of BerkeleyDB::Env.
Note that an environment consists of a number of files that Berkeley DB
manages behind the scenes for you. When you first use an environment,
it needs to be explicitly created. This is done by including
"DB_CREATE" with the "Flags" parameter, described below.
Synopsis
$env = new BerkeleyDB::Env
[ -Home => $path, ]
[ -Server => $name, ]
[ -CacheSize => $number, ]
[ -Config => { name => value, name => value }, ]
[ -ErrFile => filename, ]
[ -MsgFile => filename, ]
[ -ErrPrefix => "string", ]
[ -Flags => number, ]
[ -SetFlags => bitmask, ]
[ -LockDetect => number, ]
[ -TxMax => number, ]
[ -LogConfig => number, ]
[ -MaxLockers => number, ]
[ -MaxLocks => number, ]
[ -MaxObjects => number, ]
[ -SharedMemKey => number, ]
[ -Verbose => boolean, ]
[ -Encrypt => { Password => "string",
Flags => number }, ]
All the parameters to the BerkeleyDB::Env constructor are optional.
-Home
If present, this parameter should point to an existing directory.
Any files that aren't specified with an absolute path in the sub-
systems that are initialised by the BerkeleyDB::Env class will be
assumed to live in the Home directory.
For example, in the code fragment below the database "fred.db"
will be opened in the directory "/home/databases" because it was
specified as a relative path, but "joe.db" will be opened in
"/other" because it was part of an absolute path.
$env = new BerkeleyDB::Env
-Home => "/home/databases"
...
$db1 = new BerkeleyDB::Hash
-Filename => "fred.db",
-Env => $env
...
$db2 = new BerkeleyDB::Hash
-Filename => "/other/joe.db",
-Env => $env
...
-Server
If present, this parameter should be the hostname of a server that
is running the Berkeley DB RPC server. All databases will be
accessed via the RPC server.
-Encrypt
If present, this parameter will enable encryption of all data
before it is written to the database. This parameters must be
given a hash reference. The format is shown below.
-Encrypt => { -Password => "abc", Flags => DB_ENCRYPT_AES }
Valid values for the Flags are 0 or "DB_ENCRYPT_AES".
This option requires Berkeley DB 4.1 or better.
-Cachesize
If present, this parameter sets the size of the environments
shared memory buffer pool.
-TxMax
If present, this parameter sets the number of simultaneous
transactions that are allowed. Default 100. This default is
definitely too low for programs using the MVCC capabilities.
-LogConfig
If present, this parameter is used to configure log options.
-MaxLockers
If present, this parameter is used to configure the maximum number
of processes doing locking on the database. Default 1000.
-MaxLocks
If present, this parameter is used to configure the maximum number
of locks on the database. Default 1000. This is often lower than
required.
-MaxObjects
If present, this parameter is used to configure the maximum number
of locked objects. Default 1000. This is often lower than
required.
-SharedMemKey
If present, this parameter sets the base segment ID for the shared
memory region used by Berkeley DB.
This option requires Berkeley DB 3.1 or better.
Use "$env->get_shm_key($id)" to find out the base segment ID used
once the environment is open.
-ThreadCount
If present, this parameter declares the approximate number of
threads that will be used in the database environment. This
parameter is only necessary when the $env->failchk method will be
used. It does not actually set the maximum number of threads but
rather is used to determine memory sizing.
This option requires Berkeley DB 4.4 or better. It is only
supported on Unix/Linux.
-Config
This is a variation on the "-Home" parameter, but it allows finer
control of where specific types of files will be stored.
The parameter expects a reference to a hash. Valid keys are:
DB_DATA_DIR, DB_LOG_DIR and DB_TMP_DIR
The code below shows an example of how it can be used.
$env = new BerkeleyDB::Env
-Config => { DB_DATA_DIR => "/home/databases",
DB_LOG_DIR => "/home/logs",
DB_TMP_DIR => "/home/tmp"
}
...
-ErrFile
Expects a filename or filenhandle. Any errors generated internally
by Berkeley DB will be logged to this file. A useful debug setting
is to open environments with either
-ErrFile => *STDOUT
or
-ErrFile => *STDERR
-ErrPrefix
Allows a prefix to be added to the error messages before they are
sent to -ErrFile.
-Flags
The Flags parameter specifies both which sub-systems to
initialise, as well as a number of environment-wide options. See
the Berkeley DB documentation for more details of these options.
Any of the following can be specified by OR'ing them:
DB_CREATE
If any of the files specified do not already exist, create them.
DB_INIT_CDB
Initialise the Concurrent Access Methods
DB_INIT_LOCK
Initialise the Locking sub-system.
DB_INIT_LOG
Initialise the Logging sub-system.
DB_INIT_MPOOL
Initialize the shared memory buffer pool subsystem. This subsystem
should be used whenever an application is using any Berkeley DB
access method.
DB_INIT_TXN
Initialize the transaction subsystem. This subsystem should be
used when recovery and atomicity of multiple operations are
important. The DB_INIT_TXN flag implies the DB_INIT_LOG flag.
DB_MPOOL_PRIVATE
Create a private memory pool; see memp_open. Ignored unless
DB_INIT_MPOOL is also specified.
DB_INIT_MPOOL is also specified.
DB_NOMMAP
Do not map this database into process memory.
DB_RECOVER
Run normal recovery on this environment before opening it for
normal use. If this flag is set, the DB_CREATE flag must also be
set since the regions will be removed and recreated.
The db_appinit function returns successfully if DB_RECOVER is
specified and no log files exist, so it is necessary to ensure all
necessary log files are present before running recovery.
DB_PRIVATE
DB_RECOVER_FATAL
Run catastrophic recovery on this environment before opening it
for normal use. If this flag is set, the DB_CREATE flag must also
be set since the regions will be removed and recreated.
The db_appinit function returns successfully if DB_RECOVER_FATAL
is specified and no log files exist, so it is necessary to ensure
all necessary log files are present before running recovery.
DB_THREAD
Ensure that handles returned by the Berkeley DB subsystems are
useable by multiple threads within a single process, i.e., that
the system is free-threaded.
DB_TXN_NOSYNC
On transaction commit, do not synchronously flush the log; see
txn_open. Ignored unless DB_INIT_TXN is also specified.
DB_USE_ENVIRON
The Berkeley DB process' environment may be permitted to specify
information to be used when naming files; see Berkeley DB File
Naming. As permitting users to specify which files are used can
create security problems, environment information will be used in
file naming for all users only if the DB_USE_ENVIRON flag is set.
DB_USE_ENVIRON_ROOT
The Berkeley DB process' environment may be permitted to specify
information to be used when naming files; see Berkeley DB File
Naming. As permitting users to specify which files are used can
create security problems, if the DB_USE_ENVIRON_ROOT flag is set,
environment information will be used for file naming only for
users with a user-ID matching that of the superuser (specifically,
users for whom the getuid(2) system call returns the user-ID 0).
-SetFlags
Calls ENV->set_flags with the supplied bitmask. Use this when you
need to make use of DB_ENV->set_flags before DB_ENV->open is
called.
Only valid when Berkeley DB 3.x or better is used.
-LockDetect
Specifies what to do when a lock conflict occurs. The value should
be one of
DB_LOCK_DEFAULT
Use the default policy as specified by db_deadlock.
DB_LOCK_OLDEST
Abort the oldest transaction.
DB_LOCK_RANDOM
Abort a random transaction involved in the deadlock.
DB_LOCK_YOUNGEST
Abort the youngest transaction.
-Verbose
Add extra debugging information to the messages sent to -ErrFile.
Methods
The environment class has the following methods:
$env->errPrefix("string") ;
This method is identical to the -ErrPrefix flag. It allows the
error prefix string to be changed dynamically.
$env->set_flags(bitmask, 1|0);
$txn = $env->TxnMgr()
Constructor for creating a TxnMgr object. See "TRANSACTIONS" for
more details of using transactions.
This method is deprecated. Access the transaction methods using
the txn_ methods below from the environment object directly.
$env->txn_begin()
TODO
$env->txn_stat()
TODO
$env->txn_checkpoint()
TODO
$env->status()
Returns the status of the last BerkeleyDB::Env method.
$env->DB_ENV()
Returns a pointer to the underlying DB_ENV data structure that
Berkeley DB uses.
$env->get_shm_key($id)
Writes the base segment ID for the shared memory region used by
the Berkeley DB environment into $id. Returns 0 on success.
This option requires Berkeley DB 4.2 or better.
Use the "-SharedMemKey" option when opening the environemt to set
the base segment ID.
$env->set_isalive()
Set the callback that determines if the thread of control,
identified by the pid and tid arguments, is still running. This
method should only be used in combination with $env->failchk.
This option requires Berkeley DB 4.4 or better.
$env->failchk($flags)
The $env->failchk method checks for threads of control (either a
true thread or a process) that have exited while manipulating
Berkeley DB library data structures, while holding a logical
database lock, or with an unresolved transaction (that is, a
transaction that was never aborted or committed).
If $env->failchk determines a thread of control exited while
holding database read locks, it will release those locks. If
$env->failchk determines a thread of control exited with an
unresolved transaction, the transaction will be aborted.
Applications calling the $env->failchk method must have already
called the $env->set_isalive method, on the same DB environement,
and must have configured their database environment using the
-ThreadCount flag. The ThreadCount flag cannot be used on an
environment that wasn't previously initialized with it.
This option requires Berkeley DB 4.4 or better.
$env->stat_print
Prints statistical information.
If the "MsgFile" option is specified the output will be sent to
the file. Otherwise output is sent to standard output.
This option requires Berkeley DB 4.3 or better.
$env->lock_stat_print
Prints locking subsystem statistics.
If the "MsgFile" option is specified the output will be sent to
the file. Otherwise output is sent to standard output.
This option requires Berkeley DB 4.3 or better.
$env->mutex_stat_print
Prints mutex subsystem statistics.
If the "MsgFile" option is specified the output will be sent to
the file. Otherwise output is sent to standard output.
This option requires Berkeley DB 4.4 or better.
$env->set_timeout($timeout, $flags)
$env->status()
Returns the status of the last BerkeleyDB::Env method.
Examples
TODO.
Global Classes
$status = BerkeleyDB::db_remove [OPTIONS]
$status = BerkeleyDB::db_rename [OPTIONS]
$status = BerkeleyDB::db_verify [OPTIONS]
THE DATABASE CLASSESBerkeleyDB supports the following database formats:
BerkeleyDB::Hash
This database type allows arbitrary key/value pairs to be stored
in data files. This is equivalent to the functionality provided by
other hashing packages like DBM, NDBM, ODBM, GDBM, and SDBM.
Remember though, the files created using BerkeleyDB::Hash are not
compatible with any of the other packages mentioned.
A default hashing algorithm, which will be adequate for most
applications, is built into BerkeleyDB. If you do need to use your
own hashing algorithm it is possible to write your own in Perl and
have BerkeleyDB use it instead.
BerkeleyDB::Btree
The Btree format allows arbitrary key/value pairs to be stored in
a B+tree.
As with the BerkeleyDB::Hash format, it is possible to provide a
user defined Perl routine to perform the comparison of keys. By
default, though, the keys are stored in lexical order.
BerkeleyDB::Recno
TODO.
BerkeleyDB::Queue
TODO.
BerkeleyDB::Heap
TODO.
BerkeleyDB::Unknown
This isn't a database format at all. It is used when you want to
open an existing Berkeley DB database without having to know what
type is it.
Each of the database formats described above is accessed via a
corresponding BerkeleyDB class. These will be described in turn in the
next sections.
BerkeleyDB::Hash
Equivalent to calling db_open with type DB_HASH in Berkeley DB 2.x and
calling db_create followed by DB->open with type DB_HASH in Berkeley DB
3.x or greater.
Two forms of constructor are supported:
$db = new BerkeleyDB::Hash
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Hash specific
[ -Ffactor => number,]
[ -Nelem => number,]
[ -Hash => code reference,]
[ -DupCompare => code reference,]
and this
[$db =] tie %hash, 'BerkeleyDB::Hash',
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Hash specific
[ -Ffactor => number,]
[ -Nelem => number,]
[ -Hash => code reference,]
[ -DupCompare => code reference,]
When the "tie" interface is used, reading from and writing to the
database is achieved via the tied hash. In this case the database
operates like a Perl associative array that happens to be stored on
disk.
In addition to the high-level tied hash interface, it is possible to
make use of the underlying methods provided by Berkeley DB
Options
In addition to the standard set of options (see "COMMON OPTIONS")
BerkeleyDB::Hash supports these options:
-Property
Used to specify extra flags when opening a database. The following
flags may be specified by bitwise OR'ing together one or more of
the following values:
DB_DUP
When creating a new database, this flag enables the storing of
duplicate keys in the database. If DB_DUPSORT is not specified as
well, the duplicates are stored in the order they are created in
the database.
DB_DUPSORT
Enables the sorting of duplicate keys in the database. Ignored if
DB_DUP isn't also specified.
-Ffactor
-Nelem
See the Berkeley DB documentation for details of these options.
-Hash
Allows you to provide a user defined hash function. If not
specified, a default hash function is used. Here is a template for
a user-defined hash function
sub hash
{
my ($data) = shift ;
...
# return the hash value for $data
return $hash ;
}
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-Hash => \&hash,
...
See "" for an example.
-DupCompare
Used in conjunction with the DB_DUPOSRT flag.
sub compare
{
my ($key, $key2) = @_ ;
...
# return 0 if $key1 eq $key2
# -1 if $key1 lt $key2
# 1 if $key1 gt $key2
return (-1 , 0 or 1) ;
}
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-Property => DB_DUP|DB_DUPSORT,
-DupCompare => \&compare,
...
Methods
BerkeleyDB::Hash only supports the standard database methods. See
"COMMON DATABASE METHODS".
A Simple Tied Hash Example
use strict ;
use BerkeleyDB ;
use vars qw( %h $k $v ) ;
my $filename = "fruit" ;
unlink $filename ;
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open file $filename: $! $BerkeleyDB::Error\n" ;
# Add a few key/value pairs to the file
$h{"apple"} = "red" ;
$h{"orange"} = "orange" ;
$h{"banana"} = "yellow" ;
$h{"tomato"} = "red" ;
# Check for existence of a key
print "Banana Exists\n\n" if $h{"banana"} ;
# Delete a key/value pair.
delete $h{"apple"} ;
# print the contents of the file
while (($k, $v) = each %h)
{ print "$k -> $v\n" }
untie %h ;
here is the output:
Banana Exists
orange -> orange
tomato -> red
banana -> yellow
Note that the like ordinary associative arrays, the order of the keys
retrieved from a Hash database are in an apparently random order.
Another Simple Hash Example
Do the same as the previous example but not using tie.
use strict ;
use BerkeleyDB ;
my $filename = "fruit" ;
unlink $filename ;
my $db = new BerkeleyDB::Hash
-Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open file $filename: $! $BerkeleyDB::Error\n" ;
# Add a few key/value pairs to the file
$db->db_put("apple", "red") ;
$db->db_put("orange", "orange") ;
$db->db_put("banana", "yellow") ;
$db->db_put("tomato", "red") ;
# Check for existence of a key
print "Banana Exists\n\n" if $db->db_get("banana", $v) == 0;
# Delete a key/value pair.
$db->db_del("apple") ;
# print the contents of the file
my ($k, $v) = ("", "") ;
my $cursor = $db->db_cursor() ;
while ($cursor->c_get($k, $v, DB_NEXT) == 0)
{ print "$k -> $v\n" }
undef $cursor ;
undef $db ;
Duplicate keys
The code below is a variation on the examples above. This time the hash
has been inverted. The key this time is colour and the value is the
fruit name. The DB_DUP flag has been specified to allow duplicates.
use strict ;
use BerkeleyDB ;
my $filename = "fruit" ;
unlink $filename ;
my $db = new BerkeleyDB::Hash
-Filename => $filename,
-Flags => DB_CREATE,
-Property => DB_DUP
or die "Cannot open file $filename: $! $BerkeleyDB::Error\n" ;
# Add a few key/value pairs to the file
$db->db_put("red", "apple") ;
$db->db_put("orange", "orange") ;
$db->db_put("green", "banana") ;
$db->db_put("yellow", "banana") ;
$db->db_put("red", "tomato") ;
$db->db_put("green", "apple") ;
# print the contents of the file
my ($k, $v) = ("", "") ;
my $cursor = $db->db_cursor() ;
while ($cursor->c_get($k, $v, DB_NEXT) == 0)
{ print "$k -> $v\n" }
undef $cursor ;
undef $db ;
here is the output:
orange -> orange
yellow -> banana
red -> apple
red -> tomato
green -> banana
green -> apple
Sorting Duplicate Keys
In the previous example, when there were duplicate keys, the values are
sorted in the order they are stored in. The code below is identical to
the previous example except the DB_DUPSORT flag is specified.
use strict ;
use BerkeleyDB ;
my $filename = "fruit" ;
unlink $filename ;
my $db = new BerkeleyDB::Hash
-Filename => $filename,
-Flags => DB_CREATE,
-Property => DB_DUP | DB_DUPSORT
or die "Cannot open file $filename: $! $BerkeleyDB::Error\n" ;
# Add a few key/value pairs to the file
$db->db_put("red", "apple") ;
$db->db_put("orange", "orange") ;
$db->db_put("green", "banana") ;
$db->db_put("yellow", "banana") ;
$db->db_put("red", "tomato") ;
$db->db_put("green", "apple") ;
# print the contents of the file
my ($k, $v) = ("", "") ;
my $cursor = $db->db_cursor() ;
while ($cursor->c_get($k, $v, DB_NEXT) == 0)
{ print "$k -> $v\n" }
undef $cursor ;
undef $db ;
Notice that in the output below the duplicate values are sorted.
orange -> orange
yellow -> banana
red -> apple
red -> tomato
green -> apple
green -> banana
Custom Sorting Duplicate Keys
Another variation
TODO
Changing the hash
TODO
Using db_stat
TODO
BerkeleyDB::Btree
Equivalent to calling db_open with type DB_BTREE in Berkeley DB 2.x and
calling db_create followed by DB->open with type DB_BTREE in Berkeley
DB 3.x or greater.
Two forms of constructor are supported:
$db = new BerkeleyDB::Btree
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Btree specific
[ -Minkey => number,]
[ -Compare => code reference,]
[ -DupCompare => code reference,]
[ -Prefix => code reference,]
and this
[$db =] tie %hash, 'BerkeleyDB::Btree',
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Btree specific
[ -Minkey => number,]
[ -Compare => code reference,]
[ -DupCompare => code reference,]
[ -Prefix => code reference,]
Options
In addition to the standard set of options (see "COMMON OPTIONS")
BerkeleyDB::Btree supports these options:
-Property
Used to specify extra flags when opening a database. The following
flags may be specified by bitwise OR'ing together one or more of
the following values:
DB_DUP
When creating a new database, this flag enables the storing of
duplicate keys in the database. If DB_DUPSORT is not specified as
well, the duplicates are stored in the order they are created in
the database.
DB_DUPSORT
Enables the sorting of duplicate keys in the database. Ignored if
DB_DUP isn't also specified.
Minkey
TODO
Compare
Allow you to override the default sort order used in the database.
See "Changing the sort order" for an example.
sub compare
{
my ($key, $key2) = @_ ;
...
# return 0 if $key1 eq $key2
# -1 if $key1 lt $key2
# 1 if $key1 gt $key2
return (-1 , 0 or 1) ;
}
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-Compare => \&compare,
...
Prefix
sub prefix
{
my ($key, $key2) = @_ ;
...
# return number of bytes of $key2 which are
# necessary to determine that it is greater than $key1
return $bytes ;
}
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-Prefix => \&prefix,
...
=item DupCompare
sub compare
{
my ($key, $key2) = @_ ;
...
# return 0 if $key1 eq $key2
# -1 if $key1 lt $key2
# 1 if $key1 gt $key2
return (-1 , 0 or 1) ;
}
tie %h, "BerkeleyDB::Hash",
-Filename => $filename,
-DupCompare => \&compare,
...
set_bt_compress
Enabled compression of the btree data. The callback interface is
not supported at present. Need Berkeley DB 4.8 or better.
Methods
BerkeleyDB::Btree supports the following database methods. See also
"COMMON DATABASE METHODS".
All the methods below return 0 to indicate success.
$status = $db->db_key_range($key, $less, $equal, $greater [, $flags])
Given a key, $key, this method returns the proportion of keys less
than $key in $less, the proportion equal to $key in $equal and the
proportion greater than $key in $greater.
The proportion is returned as a double in the range 0.0 to 1.0.
A Simple Btree Example
The code below is a simple example of using a btree database.
use strict ;
use BerkeleyDB ;
my $filename = "tree" ;
unlink $filename ;
my %h ;
tie %h, 'BerkeleyDB::Btree',
-Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open $filename: $! $BerkeleyDB::Error\n" ;
# Add a key/value pair to the file
$h{'Wall'} = 'Larry' ;
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
$h{'duck'} = 'donald' ;
# Delete
delete $h{"duck"} ;
# Cycle through the keys printing them in order.
# Note it is not necessary to sort the keys as
# the btree will have kept them in order automatically.
foreach (keys %h)
{ print "$_\n" }
untie %h ;
Here is the output from the code above. The keys have been sorted using
Berkeley DB's default sorting algorithm.
Smith
Wall
mouse
Changing the sort order
It is possible to supply your own sorting algorithm if the one that
Berkeley DB used isn't suitable. The code below is identical to the
previous example except for the case insensitive compare function.
use strict ;
use BerkeleyDB ;
my $filename = "tree" ;
unlink $filename ;
my %h ;
tie %h, 'BerkeleyDB::Btree',
-Filename => $filename,
-Flags => DB_CREATE,
-Compare => sub { lc $_[0] cmp lc $_[1] }
or die "Cannot open $filename: $!\n" ;
# Add a key/value pair to the file
$h{'Wall'} = 'Larry' ;
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
$h{'duck'} = 'donald' ;
# Delete
delete $h{"duck"} ;
# Cycle through the keys printing them in order.
# Note it is not necessary to sort the keys as
# the btree will have kept them in order automatically.
foreach (keys %h)
{ print "$_\n" }
untie %h ;
Here is the output from the code above.
mouse
Smith
Wall
There are a few point to bear in mind if you want to change the
ordering in a BTREE database:
1. The new compare function must be specified when you create the
database.
2. You cannot change the ordering once the database has been created.
Thus you must use the same compare function every time you access
the database.
Using db_stat
TODO
BerkeleyDB::Recno
Equivalent to calling db_open with type DB_RECNO in Berkeley DB 2.x and
calling db_create followed by DB->open with type DB_RECNO in Berkeley
DB 3.x or greater.
Two forms of constructor are supported:
$db = new BerkeleyDB::Recno
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Recno specific
[ -Delim => byte,]
[ -Len => number,]
[ -Pad => byte,]
[ -Source => filename,]
and this
[$db =] tie @arry, 'BerkeleyDB::Recno',
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Recno specific
[ -Delim => byte,]
[ -Len => number,]
[ -Pad => byte,]
[ -Source => filename,]
A Recno Example
Here is a simple example that uses RECNO (if you are using a version of
Perl earlier than 5.004_57 this example won't work -- see "Extra RECNO
Methods" for a workaround).
use strict ;
use BerkeleyDB ;
my $filename = "text" ;
unlink $filename ;
my @h ;
tie @h, 'BerkeleyDB::Recno',
-Filename => $filename,
-Flags => DB_CREATE,
-Property => DB_RENUMBER
or die "Cannot open $filename: $!\n" ;
# Add a few key/value pairs to the file
$h[0] = "orange" ;
$h[1] = "blue" ;
$h[2] = "yellow" ;
push @h, "green", "black" ;
my $elements = scalar @h ;
print "The array contains $elements entries\n" ;
my $last = pop @h ;
print "popped $last\n" ;
unshift @h, "white" ;
my $first = shift @h ;
print "shifted $first\n" ;
# Check for existence of a key
print "Element 1 Exists with value $h[1]\n" if $h[1] ;
untie @h ;
Here is the output from the script:
The array contains 5 entries
popped black
shifted white
Element 1 Exists with value blue
The last element is green
The 2nd last element is yellow
BerkeleyDB::Queue
Equivalent to calling db_create followed by DB->open with type DB_QUEUE
in Berkeley DB 3.x or greater. This database format isn't available if
you use Berkeley DB 2.x.
Two forms of constructor are supported:
$db = new BerkeleyDB::Queue
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Queue specific
[ -Len => number,]
[ -Pad => byte,]
[ -ExtentSize => number, ]
and this
[$db =] tie @arry, 'BerkeleyDB::Queue',
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Queue specific
[ -Len => number,]
[ -Pad => byte,]
BerkeleyDB::Heap
Equivalent to calling db_create followed by DB->open with type DB_HEAP
in Berkeley DB 5.2.x or greater. This database format isn't available
if you use an older version of Berkeley DB.
One form of constructor is supported:
$db = new BerkeleyDB::Heap
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
# BerkeleyDB::Heap specific
[ -HeapSize => number, ]
[ -HeapSizeGb => number, ]
BerkeleyDB::Unknown
This class is used to open an existing database.
Equivalent to calling db_open with type DB_UNKNOWN in Berkeley DB 2.x
and calling db_create followed by DB->open with type DB_UNKNOWN in
Berkeley DB 3.x or greater.
The constructor looks like this:
$db = new BerkeleyDB::Unknown
[ -Filename => "filename", ]
[ -Subname => "sub-database name", ]
[ -Flags => flags,]
[ -Property => flags,]
[ -Mode => number,]
[ -Cachesize => number,]
[ -Lorder => number,]
[ -Pagesize => number,]
[ -Env => $env,]
[ -Txn => $txn,]
[ -Encrypt => { Password => "string",
Flags => number }, ],
An example
COMMON OPTIONS
All database access class constructors support the common set of
options defined below. All are optional.
-Filename
The database filename. If no filename is specified, a temporary
file will be created and removed once the program terminates.
-Subname
Specifies the name of the sub-database to open. This option is
only valid if you are using Berkeley DB 3.x or greater.
-Flags
Specify how the database will be opened/created. The valid flags
are:
DB_CREATE
Create any underlying files, as necessary. If the files do not
already exist and the DB_CREATE flag is not specified, the call
will fail.
DB_NOMMAP
Not supported by BerkeleyDB.
DB_RDONLY
Opens the database in read-only mode.
DB_THREAD
Not supported by BerkeleyDB.
DB_TRUNCATE
If the database file already exists, remove all the data before
opening it.
-Mode
Determines the file protection when the database is created.
Defaults to 0666.
-Cachesize
-Lorder
-Pagesize
-Env When working under a Berkeley DB environment, this parameter
Defaults to no environment.
-Encrypt
If present, this parameter will enable encryption of all data
before it is written to the database. This parameters must be
given a hash reference. The format is shown below.
-Encrypt => { -Password => "abc", Flags => DB_ENCRYPT_AES }
Valid values for the Flags are 0 or "DB_ENCRYPT_AES".
This option requires Berkeley DB 4.1 or better.
-Txn TODO.
COMMON DATABASE METHODS
All the database interfaces support the common set of methods defined
below.
All the methods below return 0 to indicate success.
$env = $db->Env();
Returns the environment object the database is associated with or
"undef" when no environment was used when opening the database.
$status = $db->db_get($key, $value [, $flags])
Given a key ($key) this method reads the value associated with it from
the database. If it exists, the value read from the database is
returned in the $value parameter.
The $flags parameter is optional. If present, it must be set to one of
the following values:
DB_GET_BOTH
When the DB_GET_BOTH flag is specified, db_get checks for the
existence of both the $key and $value in the database.
DB_SET_RECNO
TODO.
In addition, the following value may be set by bitwise OR'ing it into
the $flags parameter:
DB_RMW
TODO
The variant "db_pget" allows you to query a secondary database:
$status = $sdb->db_pget($skey, $pkey, $value);
using the key $skey in the secondary db to lookup $pkey and $value from
the primary db.
$status = $db->db_exists($key [, $flags])
This method checks for the existence of the given key ($key), but does
not read the value. If the key is not found, db_exists will return
DB_NOTFOUND. Requires BDB 4.6 or better.
$status = $db->db_put($key, $value [, $flags])
Stores a key/value pair in the database.
The $flags parameter is optional. If present it must be set to one of
the following values:
DB_APPEND
This flag is only applicable when accessing a BerkeleyDB::Recno
database.
TODO.
DB_NOOVERWRITE
If this flag is specified and $key already exists in the database,
the call to db_put will return DB_KEYEXIST.
$status = $db->db_del($key [, $flags])
Deletes a key/value pair in the database associated with $key. If
duplicate keys are enabled in the database, db_del will delete all
key/value pairs with key $key.
The $flags parameter is optional and is currently unused.
$status = $env->stat_print([$flags])
Prints statistical information.
If the "MsgFile" option is specified the output will be sent to the
file. Otherwise output is sent to standard output.
This option requires Berkeley DB 4.3 or better.
$status = $db->db_sync()
If any parts of the database are in memory, write them to the database.
$cursor = $db->db_cursor([$flags])
Creates a cursor object. This is used to access the contents of the
database sequentially. See CURSORS for details of the methods available
when working with cursors.
The $flags parameter is optional. If present it must be set to one of
the following values:
DB_RMW
TODO.
($flag, $old_offset, $old_length) = $db->partial_set($offset, $length) ;
TODO
($flag, $old_offset, $old_length) = $db->partial_clear() ;
TODO
$db->byteswapped()
TODO
$db->type()
Returns the type of the database. The possible return code are DB_HASH
for a BerkeleyDB::Hash database, DB_BTREE for a BerkeleyDB::Btree
database and DB_RECNO for a BerkeleyDB::Recno database. This method is
typically used when a database has been opened with
BerkeleyDB::Unknown.
$bool = $env->cds_enabled();
Returns true if the Berkeley DB environment $env has been opened on CDS
mode.
$bool = $db->cds_enabled();
Returns true if the database $db has been opened on CDS mode.
$lock = $db->cds_lock();
Creates a CDS write lock object $lock.
It is a fatal error to attempt to create a cds_lock if the Berkeley DB
environment has not been opened in CDS mode.
$lock->cds_unlock();
Removes a CDS lock. The destruction of the CDS lock object
automatically calls this method.
Note that if multiple CDS lock objects are created, the underlying
write lock will not be released until all CDS lock objects are either
explictly unlocked with this method, or the CDS lock objects have been
destroyed.
$ref = $db->db_stat()
Returns a reference to an associative array containing information
about the database. The keys of the associative array correspond
directly to the names of the fields defined in the Berkeley DB
documentation. For example, in the DB documentation, the field
bt_version stores the version of the Btree database. Assuming you
called db_stat on a Btree database the equivalent field would be
accessed as follows:
$version = $ref->{'bt_version'} ;
If you are using Berkeley DB 3.x or better, this method will work will
all database formats. When DB 2.x is used, it only works with
BerkeleyDB::Btree.
$status = $db->status()
Returns the status of the last $db method called.
$status = $db->truncate($count)
Truncates the datatabase and returns the number or records deleted in
$count.
$status = $db->compact($start, $stop, $c_data, $flags, $end);
Compacts the database $db.
All the parameters are optional - if only want to make use of some of
them, use "undef" for those you don't want. Trailing unusused
parameters can be omitted. For example, if you only want to use the
$c_data parameter to set the "compact_fillpercent", write you code like
this
my %hash;
$hash{compact_fillpercent} = 50;
$db->compact(undef, undef, \%hash);
The parameters operate identically to the C equivalent of this method.
The $c_data needs a bit of explanation - it must be a hash reference.
The values of the following keys can be set before calling "compact"
and will affect the operation of the compaction.
· compact_fillpercent
· compact_timeout
The following keys, along with associated values, will be created in
the hash reference if the "compact" operation was successful.
· compact_deadlock
· compact_levels
· compact_pages_free
· compact_pages_examine
· compact_pages_truncated
You need to be running Berkeley DB 4.4 or better if you want to make
use of "compact".
$status = $db->associate($secondary, \&key_callback)
Associate $db with the secondary DB $secondary
New key/value pairs inserted to the database will be passed to the
callback which must set its third argument to the secondary key to
allow lookup. If an array reference is set multiple keys secondary keys
will be associated with the primary database entry.
Data may be retrieved fro the secondary database using "db_pget" to
also obtain the primary key.
Secondary databased are maintained automatically.
$status = $db->associate_foreign($secondary, callback, $flags)
Associate a foreign key database $db with the secondary DB $secondary.
The second parameter must be a reference to a sub or "undef".
The $flags parameter must be either "DB_FOREIGN_CASCADE",
"DB_FOREIGN_ABORT" or "DB_FOREIGN_NULLIFY".
When the flags parameter is "DB_FOREIGN_NULLIFY" the second parameter
is a reference to a sub of the form
sub foreign_cb
{
my $key = \$_[0];
my $value = \$_[1];
my $foreignkey = \$_[2];
my $changed = \$_[3] ;
# for ... set $$value and set $$changed to 1
return 0;
}
$foreign_db->associate_foreign($secondary, \&foreign_cb, DB_FOREIGN_NULLIFY);
CURSORS
A cursor is used whenever you want to access the contents of a database
in sequential order. A cursor object is created with the "db_cursor"
A cursor object has the following methods available:
$newcursor = $cursor->c_dup($flags)
Creates a duplicate of $cursor. This method needs Berkeley DB 3.0.x or
better.
The $flags parameter is optional and can take the following value:
DB_POSITION
When present this flag will position the new cursor at the same
place as the existing cursor.
$status = $cursor->c_get($key, $value, $flags)
Reads a key/value pair from the database, returning the data in $key
and $value. The key/value pair actually read is controlled by the
$flags parameter, which can take one of the following values:
DB_FIRST
Set the cursor to point to the first key/value pair in the
database. Return the key/value pair in $key and $value.
DB_LAST
Set the cursor to point to the last key/value pair in the
database. Return the key/value pair in $key and $value.
DB_NEXT
If the cursor is already pointing to a key/value pair, it will be
incremented to point to the next key/value pair and return its
contents.
If the cursor isn't initialised, DB_NEXT works just like DB_FIRST.
If the cursor is already positioned at the last key/value pair,
c_get will return DB_NOTFOUND.
DB_NEXT_DUP
This flag is only valid when duplicate keys have been enabled in a
database. If the cursor is already pointing to a key/value pair
and the key of the next key/value pair is identical, the cursor
will be incremented to point to it and their contents returned.
DB_PREV
If the cursor is already pointing to a key/value pair, it will be
decremented to point to the previous key/value pair and return its
contents.
If the cursor isn't initialised, DB_PREV works just like DB_LAST.
If the cursor is already positioned at the first key/value pair,
c_get will return DB_NOTFOUND.
DB_CURRENT
If the cursor has been set to point to a key/value pair, return
their contents. If the key/value pair referenced by the cursor
has been deleted, c_get will return DB_KEYEMPTY.
DB_SET
Set the cursor to point to the key/value pair referenced by $key
and return the value in $value.
DB_SET_RANGE
This flag is a variation on the DB_SET flag. As well as returning
the value, it also returns the key, via $key. When used with a
BerkeleyDB::Btree database the key matched by c_get will be the
shortest key (in length) which is greater than or equal to the key
supplied, via $key. This allows partial key searches. See ??? for
an example of how to use this flag.
DB_GET_BOTH
Another variation on DB_SET. This one returns both the key and the
value.
DB_SET_RECNO
TODO.
DB_GET_RECNO
TODO.
In addition, the following value may be set by bitwise OR'ing it into
the $flags parameter:
DB_RMW
TODO.
$status = $cursor->c_put($key, $value, $flags)
Stores the key/value pair in the database. The position that the data
is stored in the database is controlled by the $flags parameter, which
must take one of the following values:
DB_AFTER
When used with a Btree or Hash database, a duplicate of the key
referenced by the current cursor position will be created and the
contents of $value will be associated with it - $key is ignored.
The new key/value pair will be stored immediately after the
current cursor position. Obviously the database has to have been
opened with DB_DUP.
When used with a Recno ... TODO
DB_BEFORE
When used with a Btree or Hash database, a duplicate of the key
referenced by the current cursor position will be created and the
contents of $value will be associated with it - $key is ignored.
The new key/value pair will be stored immediately before the
current cursor position. Obviously the database has to have been
opened with DB_DUP.
When used with a Recno ... TODO
DB_CURRENT
If the cursor has been initialised, replace the value of the
key/value pair stored in the database with the contents of $value.
DB_KEYFIRST
Only valid with a Btree or Hash database. This flag is only really
used when duplicates are enabled in the database and sorted
duplicates haven't been specified. In this case the key/value
pair will be inserted as the first entry in the duplicates for the
particular key.
DB_KEYLAST
Only valid with a Btree or Hash database. This flag is only really
used when duplicates are enabled in the database and sorted
duplicates haven't been specified. In this case the key/value
pair will be inserted as the last entry in the duplicates for the
particular key.
$status = $cursor->c_del([$flags])
This method deletes the key/value pair associated with the current
cursor position. The cursor position will not be changed by this
operation, so any subsequent cursor operation must first initialise the
cursor to point to a valid key/value pair.
If the key/value pair associated with the cursor have already been
deleted, c_del will return DB_KEYEMPTY.
The $flags parameter is not used at present.
$status = $cursor->c_count($cnt [, $flags])
Stores the number of duplicates at the current cursor position in $cnt.
The $flags parameter is not used at present. This method needs Berkeley
DB 3.1 or better.
$status = $cursor->status()
Returns the status of the last cursor method as a dual type.
$status = $cursor->c_pget() ;
See "db_pget"
$status = $cursor->c_close()
Closes the cursor $cursor.
Cursor Examples
TODO
Iterating from first to last, then in reverse.
examples of each of the flags.
JOIN
Join support for BerkeleyDB is in progress. Watch this space.
TODO
TRANSACTIONS
Transactions are created using the "txn_begin" method on
BerkeleyDB::Env:
my $txn = $env->txn_begin;
If this is a nested transaction, supply the parent transaction as an
argument:
my $child_txn = $env->txn_begin($parent_txn);
Then in order to work with the transaction, you must set it as the
current transaction on the database handles you want to work with:
$db->Txn($txn);
Or for multiple handles:
$txn->Txn(@handles);
The current transaction is given by BerkeleyDB each time to the various
BDB operations. In the C api it is required explicitly as an argument
to every operation.
To commit a transaction call the "commit" method on it:
$txn->txn_commit;
and to roll back call abort:
$txn->txn_abort
After committing or aborting a child transaction you need to set the
active transaction again using "Txn".
Berkeley DB Concurrent Data Store (CDS)
The Berkeley DB Concurrent Data Store (CDS) is a lightweight locking
mechanism that is useful in scenarios where transactions are overkill.
What is CDS?
The Berkeley DB CDS interface is a simple lightweight locking mechanism
that allows safe concurrent access to Berkeley DB databases. Your
application can have multiple reader and write processes, but Berkeley
DB will arrange it so that only one process can have a write lock
against the database at a time, i.e. multiple processes can read from a
database concurrently, but all write processes will be serialised.
Should I use it?
Whilst this simple locking model is perfectly adequate for some
applications, it will be too restrictive for others. Before deciding on
using CDS mode, you need to be sure that it is suitable for the
expected behaviour of your application.
The key features of this model are
· All writes operations are serialised.
· A write operation will block until all reads have finished.
There are a few of the attributes of your application that you need to
be aware of before choosing to use CDS.
Firstly, if you application needs either recoverability or transaction
support, then CDS will not be suitable.
Next what is the ratio of read operation to write operations will your
application have?
If it is carrying out mostly read operations, and very few writes, then
CDS may be appropriate.
What is the expected throughput of reads/writes in your application?
If you application does 90% writes and 10% reads, but on average you
only have a transaction every 5 seconds, then the fact that all writes
are serialised will not matter, because there will hardly ever be
multiple writes processes blocking.
In summary CDS mode may be appropriate for your application if it
performs mostly reads and very few writes or there is a low throughput.
Also, if you do not need to be able to roll back a series of database
operations if an error occurs, then CDS is ok.
If any of these is not the case you will need to use Berkeley DB
transactions. That is outside the scope of this document.
Locking Used
Berkeley DB implements CDS mode using two kinds of lock behind the
scenes - namely read locks and write locks. A read lock allows multiple
processes to access the database for reading at the same time. A write
lock will only get access to the database when there are no read or
write locks active. The write lock will block until the process
holding the lock releases it.
Multiple processes with read locks can all access the database at the
same time as long as no process has a write lock. A process with a
write lock can only access the database if there are no other active
read or write locks.
The majority of the time the Berkeley DB CDS mode will handle all
locking without your application having to do anything. There are a
couple of exceptions you need to be aware of though - these will be
discussed in "Safely Updating Records" and "Implicit Cursors" below.
A Berkeley DB Cursor (created with "$db->db_cursor") will by hold a
lock on the database until it is either explicitly closed or destroyed.
This means the lock has the potential to be long lived.
By default Berkeley DB cursors create a read lock, but it is possible
to create a cursor that holds a write lock, thus
$cursor = $db->db_cursor(DB_WRITECURSOR);
Whilst either a read or write cursor is active, it will block any other
processes that wants to write to the database.
To avoid blocking problems, only keep cursors open as long as they are
needed. The same is true when you use the "cursor" method or the
"cds_lock" method.
For full information on CDS see the "Berkeley DB Concurrent Data Store
applications" section in the Berkeley DB Reference Guide.
Opening a database for CDS
Here is the typical signature that is used when opening a database in
CDS mode.
use BerkeleyDB ;
my $env = new BerkeleyDB::Env
-Home => "./home" ,
-Flags => DB_CREATE| DB_INIT_CDB | DB_INIT_MPOOL
or die "cannot open environment: $BerkeleyDB::Error\n";
my $db = new BerkeleyDB::Hash
-Filename => 'test1.db',
-Flags => DB_CREATE,
-Env => $env
or die "cannot open database: $BerkeleyDB::Error\n";
or this, if you use the tied interface
tie %hash, "BerkeleyDB::Hash",
-Filename => 'test2.db',
-Flags => DB_CREATE,
-Env => $env
or die "cannot open database: $BerkeleyDB::Error\n";
The first thing to note is that you MUST always use a Berkeley DB
environment if you want to use locking with Berkeley DB.
Remember, that apart from the actual database files you explicitly
create yourself, Berkeley DB will create a few behind the scenes to
handle locking - they usually have names like "__db.001". It is
therefore a good idea to use the "-Home" option, unless you are happy
for all these files to be written in the current directory.
Next, remember to include the "DB_CREATE" flag when opening the
environment for the first time. A common mistake is to forget to add
this option and then wonder why the application doesn't work.
Finally, it is vital that all processes that are going to access the
database files use the same Berkeley DB environment.
Safely Updating a Record
One of the main gotchas when using CDS is if you want to update a
record in a database, i.e. you want to retrieve a record from a
database, modify it in some way and put it back in the database.
For example, say you are writing a web application and you want to keep
a record of the number of times your site is accessed in a Berkeley DB
database. So your code will have a line of code like this (assume, of
course, that %hash has been tied to a Berkeley DB database):
$hash{Counter} ++ ;
That may look innocent enough, but there is a race condition lurking in
there. If I rewrite the line of code using the low-level Berkeley DB
API, which is what will actually be executed, the race condition may be
more apparent:
$db->db_get("Counter", $value);
++ $value ;
$db->db_put("Counter", $value);
Consider what happens behind the scenes when you execute the commands
above. Firstly, the existing value for the key "Counter" is fetched
from the database using "db_get". A read lock will be used for this
part of the update. The value is then incremented, and the new value
is written back to the database using "db_put". This time a write lock
will be used.
Here's the problem - there is nothing to stop two (or more) processes
executing the read part at the same time. Remember multiple processes
can hold a read lock on the database at the same time. So both will
fetch the same value, let's say 7, from the database. Both increment
the value to 8 and attempt to write it to the database. Berkeley DB
will ensure that only one of the processes gets a write lock, while the
other will be blocked. So the process that happened to get the write
lock will store the value 8 to the database and release the write lock.
Now the other process will be unblocked, and it too will write the
value 8 to the database. The result, in this example, is we have missed
a hit in the counter.
To deal with this kind of scenario, you need to make the update atomic.
A convenience method, called "cds_lock", is supplied with the
BerkeleyDB module for this purpose. Using "cds_lock", the counter
update code can now be rewritten thus:
my $lk = $dbh->cds_lock() ;
$hash{Counter} ++ ;
$lk->cds_unlock;
or this, where scoping is used to limit the lifetime of the lock object
{
my $lk = $dbh->cds_lock() ;
$hash{Counter} ++ ;
}
Similarly, "cds_lock" can be used with the native Berkeley DB API
my $lk = $dbh->cds_lock() ;
$db->db_get("Counter", $value);
++ $value ;
$db->db_put("Counter", $value);
$lk->unlock;
The "cds_lock" method will ensure that the current process has
exclusive access to the database until the lock is either explicitly
released, via the "$lk->cds_unlock()" or by the lock object being
destroyed.
If you are interested, all that "cds_lock" does is open a "write"
cursor. This has the useful side-effect of holding a write-lock on the
database until the cursor is deleted. This is how you create a write-
cursor
$cursor = $db->db_cursor(DB_WRITECURSOR);
If you have instantiated multiple "cds_lock" objects for one database
within a single process, that process will hold a write-lock on the
database until ALL "cds_lock" objects have been destroyed.
As with all write-cursors, you should try to limit the scope of the
"cds_lock" to as short a time as possible. Remember the complete
database will be locked to other process whilst the write lock is in
place.
Cannot write with a read cursor while a write cursor is active
This issue is easier to demonstrate with an example, so consider the
code below. The intention of the code is to increment the values of all
the elements in a database by one.
# Assume $db is a database opened in a CDS environment.
# Create a write-lock
my $lock = $db->db_cursor(DB_WRITECURSOR);
# or
# my $lock = $db->cds_lock();
my $cursor = $db->db_cursor();
# Now loop through the database, and increment
# each value using c_put.
while ($cursor->c_get($key, $value, DB_NEXT) == 0)
{
$cursor->c_put($key, $value+1, DB_CURRENT) == 0
or die "$BerkeleyDB::Error\n";
}
When this code is run, it will fail on the "c_put" line with this error
Write attempted on read-only cursor
The read cursor has automatically disallowed a write operation to
prevent a deadlock.
So the rule is -- you CANNOT carry out a write operation using a read-
only cursor (i.e. you cannot use "c_put" or "c_del") whilst another
write-cursor is already active.
The workaround for this issue is to just use "db_put" instead of
"c_put", like this
# Assume $db is a database opened in a CDS environment.
# Create a write-lock
my $lock = $db->db_cursor(DB_WRITECURSOR);
# or
# my $lock = $db->cds_lock();
my $cursor = $db->db_cursor();
# Now loop through the database, and increment
# each value using c_put.
while ($cursor->c_get($key, $value, DB_NEXT) == 0)
{
$db->db_put($key, $value+1) == 0
or die "$BerkeleyDB::Error\n";
}
Implicit Cursors
All Berkeley DB cursors will hold either a read lock or a write lock on
the database for the existence of the cursor. In order to prevent
blocking of other processes you need to make sure that they are not
long lived.
There are a number of instances where the Perl interface to Berkeley DB
will create a cursor behind the scenes without you being aware of it.
Most of these are very short-lived and will not affect the running of
your script, but there are a few notable exceptions.
Consider this snippet of code
while (my ($k, $v) = each %hash)
{
# do something
}
To implement the "each" functionality, a read cursor will be created
behind the scenes to allow you to iterate through the tied hash, %hash.
While that cursor is still active, a read lock will obviously be held
against the database. If your application has any other writing
processes, these will be blocked until the read cursor is closed. That
won't happen until the loop terminates.
To avoid blocking problems, only keep cursors open as long as they are
needed. The same is true when you use the "cursor" method or the
"cds_lock" method.
The locking behaviour of the "values" or "keys" functions, shown below,
is subtly different.
foreach my $k (keys %hash)
{
# do something
}
foreach my $v (values %hash)
{
# do something
}
Just as in the "each" function, a read cursor will be created to
iterate over the database in both of these cases. Where "keys" and
"values" differ is the place where the cursor carries out the iteration
through the database. Whilst "each" carried out a single iteration
every time it was invoked, the "keys" and "values" functions will
iterate through the entire database in one go -- the complete database
will be read into memory before the first iteration of the loop.
Apart from the fact that a read lock will be held for the amount of
time required to iterate through the database, the use of "keys" and
"values" is not recommended because it will result in the complete
database being read into memory.
Avoiding Deadlock with multiple databases
If your CDS application uses multiple database files, and you need to
write to more than one of them, you need to be careful you don't create
a deadlock.
For example, say you have two databases, D1 and D2, and two processes,
P1 and P2. Assume you want to write a record to each database. If P1
writes the records to the databases in the order D1, D2 while process
P2 writes the records in the order D2, D1, there is the potential for a
deadlock to occur.
This scenario can be avoided by either always acquiring the write locks
in exactly the same order in your application code, or by using the
"DB_CDB_ALLDB" flag when opening the environment. This flag will make a
write-lock apply to all the databases in the environment.
Add example here
DBM Filters
A DBM Filter is a piece of code that is be used when you always want to
make the same transformation to all keys and/or values in a DBM
database. All of the database classes (BerkeleyDB::Hash,
BerkeleyDB::Btree and BerkeleyDB::Recno) support DBM Filters.
There are four methods associated with DBM Filters. All work
identically, and each is used to install (or uninstall) a single DBM
Filter. Each expects a single parameter, namely a reference to a sub.
The only difference between them is the place that the filter is
installed.
To summarise:
filter_store_key
If a filter has been installed with this method, it will be
invoked every time you write a key to a DBM database.
filter_store_value
If a filter has been installed with this method, it will be
invoked every time you write a value to a DBM database.
filter_fetch_key
If a filter has been installed with this method, it will be
invoked every time you read a key from a DBM database.
filter_fetch_value
If a filter has been installed with this method, it will be
invoked every time you read a value from a DBM database.
You can use any combination of the methods, from none, to all four.
All filter methods return the existing filter, if present, or "undef"
in not.
To delete a filter pass "undef" to it.
The Filter
When each filter is called by Perl, a local copy of $_ will contain the
key or value to be filtered. Filtering is achieved by modifying the
contents of $_. The return code from the filter is ignored.
An Example -- the NULL termination problem.
Consider the following scenario. You have a DBM database that you need
to share with a third-party C application. The C application assumes
that all keys and values are NULL terminated. Unfortunately when Perl
writes to DBM databases it doesn't use NULL termination, so your Perl
application will have to manage NULL termination itself. When you write
to the database you will have to use something like this:
$hash{"$key\0"} = "$value\0" ;
Similarly the NULL needs to be taken into account when you are
considering the length of existing keys/values.
It would be much better if you could ignore the NULL terminations issue
in the main application code and have a mechanism that automatically
added the terminating NULL to all keys and values whenever you write to
the database and have them removed when you read from the database. As
I'm sure you have already guessed, this is a problem that DBM Filters
can fix very easily.
use strict ;
use BerkeleyDB ;
my %hash ;
my $filename = "filt.db" ;
unlink $filename ;
my $db = tie %hash, 'BerkeleyDB::Hash',
-Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open $filename: $!\n" ;
# Install DBM Filters
$db->filter_fetch_key ( sub { s/\0$// } ) ;
$db->filter_store_key ( sub { $_ .= "\0" } ) ;
$db->filter_fetch_value( sub { s/\0$// } ) ;
$db->filter_store_value( sub { $_ .= "\0" } ) ;
$hash{"abc"} = "def" ;
my $a = $hash{"ABC"} ;
# ...
undef $db ;
untie %hash ;
Hopefully the contents of each of the filters should be self-
explanatory. Both "fetch" filters remove the terminating NULL, and both
"store" filters add a terminating NULL.
Another Example -- Key is a C int.
Here is another real-life example. By default, whenever Perl writes to
a DBM database it always writes the key and value as strings. So when
you use this:
$hash{12345} = "something" ;
the key 12345 will get stored in the DBM database as the 5 byte string
"12345". If you actually want the key to be stored in the DBM database
as a C int, you will have to use "pack" when writing, and "unpack" when
reading.
Here is a DBM Filter that does it:
use strict ;
use BerkeleyDB ;
my %hash ;
my $filename = "filt.db" ;
unlink $filename ;
my $db = tie %hash, 'BerkeleyDB::Btree',
-Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open $filename: $!\n" ;
$db->filter_fetch_key ( sub { $_ = unpack("i", $_) } ) ;
$db->filter_store_key ( sub { $_ = pack ("i", $_) } ) ;
$hash{123} = "def" ;
# ...
undef $db ;
untie %hash ;
This time only two filters have been used -- we only need to manipulate
the contents of the key, so it wasn't necessary to install any value
filters.
Using BerkeleyDB with MLDBM
Both BerkeleyDB::Hash and BerkeleyDB::Btree can be used with the MLDBM
module. The code fragment below shows how to open associate MLDBM with
BerkeleyDB::Btree. To use BerkeleyDB::Hash just replace
BerkeleyDB::Btree with BerkeleyDB::Hash.
use strict ;
use BerkeleyDB ;
use MLDBM qw(BerkeleyDB::Btree) ;
use Data::Dumper;
my $filename = 'testmldbm' ;
my %o ;
unlink $filename ;
tie %o, 'MLDBM', -Filename => $filename,
-Flags => DB_CREATE
or die "Cannot open database '$filename: $!\n";
See the MLDBM documentation for information on how to use the module
and for details of its limitations.
EXAMPLES
TODO.
HINTS & TIPS
Sharing Databases With C Applications
There is no technical reason why a Berkeley DB database cannot be
shared by both a Perl and a C application.
The vast majority of problems that are reported in this area boil down
to the fact that C strings are NULL terminated, whilst Perl strings are
not. See "An Example -- the NULL termination problem." in the DBM
FILTERS section for a generic way to work around this problem.
The untie Gotcha
TODO
COMMON QUESTIONS
This section attempts to answer some of the more common questions that
I get asked.
Relationship with DB_File
Before Berkeley DB 2.x was written there was only one Perl module that
interfaced to Berkeley DB. That module is called DB_File. Although
DB_File can be build with Berkeley DB 1.x, 2.x, 3.x or 4.x, it only
provides an interface to the functionality available in Berkeley DB
1.x. That means that it doesn't support transactions, locking or any of
the other new features available in DB 2.x or better.
How do I store Perl data structures with BerkeleyDB?
See "Using BerkeleyDB with MLDBM".
HISTORY
See the Changes file.
AVAILABILITY
The most recent version of BerkeleyDB can always be found on CPAN (see
"CPAN" in perlmod for details), in the directory
modules/by-module/BerkeleyDB.
The official web site for Berkeley DB is
http://www.oracle.com/technology/products/berkeley-db/db/index.html.
COPYRIGHT
Copyright (c) 1997-2004 Paul Marquess. All rights reserved. This
program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
Although BerkeleyDB is covered by the Perl license, the library it
makes use of, namely Berkeley DB, is not. Berkeley DB has its own
copyright and its own license. Please take the time to read it.
Here are few words taken from the Berkeley DB FAQ (at
http://www.oracle.com/technology/products/berkeley-db/db/index.html)
regarding the license:
Do I have to license DB to use it in Perl scripts?
No. The Berkeley DB license requires that software that uses
Berkeley DB be freely redistributable. In the case of Perl, that
software is Perl, and not your scripts. Any Perl scripts that you
write are your property, including scripts that make use of Berkeley
DB. Neither the Perl license nor the Berkeley DB license
place any restriction on what you may do with them.
If you are in any doubt about the license situation, contact either the
Berkeley DB authors or the author of BerkeleyDB. See "AUTHOR" for
details.
AUTHOR
Paul Marquess <pmqs@cpan.org>.
SEE ALSOperl(1), DB_File, Berkeley DB.
perl v5.16.2 2011-08-06 BerkeleyDB(3)