HTTP::Proxy(3) User Contributed Perl Documentation HTTP::Proxy(3)NAMEHTTP::Proxy - A pure Perl HTTP proxy
SYNOPSIS
use HTTP::Proxy;
# initialisation
my $proxy = HTTP::Proxy->new( port => 3128 );
# alternate initialisation
my $proxy = HTTP::Proxy->new;
$proxy->port( 3128 ); # the classical accessors are here!
# this is a MainLoop-like method
$proxy->start;
DESCRIPTION
This module implements a HTTP proxy, using a HTTP::Daemon to accept
client connections, and a LWP::UserAgent to ask for the requested
pages.
The most interesting feature of this proxy object is its ability to
filter the HTTP requests and responses through user-defined filters.
Once the proxy is created, with the "new()" method, it is possible to
alter its behaviour by adding so-called "filters". This is done by the
"push_filter()" method. Once the filter is ready to run, it can be
launched, with the "start()" method. This method does not normally
return until the proxy is killed or otherwise stopped.
An important thing to note is that the proxy is (except when running
the "NoFork" engine) a forking proxy: it doesn't support passing
information between child processes, and you can count on reliable
information passing only during a single HTTP connection (request +
response).
FILTERS
You can alter the way the default HTTP::Proxy works by plugging
callbacks (filter objects, actually) at different stages of the
request/response handling.
When a request is received by the HTTP::Proxy object, it is filtered
through a standard filter that transform this request accordingly to
RFC 2616 (by adding the "Via:" header, and a few other
transformations). This is the default, bare minimum behaviour.
The response is also filtered in the same manner. There is a total of
four filter chains: "request-headers", "request-body",
"reponse-headers" and "response-body".
You can add your own filters to the default ones with the
"push_filter()" method. The method pushes a filter on the appropriate
filter stack.
$proxy->push_filter( response => $filter );
The headers/body category is determined by the base class of the
filter. There are two base classes for filters, which are
"HTTP::Proxy::HeaderFilter" and "HTTP::Proxy::BodyFilter" (the names
are self-explanatory). See the documentation of those two classes to
find out how to write your own header or body filters.
The named parameter is used to determine the request/response part.
It is possible to push the same filter on the request and response
stacks, as in the following example:
$proxy->push_filter( request => $filter, response => $filter );
If several filters match the message, they will be applied in the order
they were pushed on their filter stack.
Named parameters can be used to create the match routine. They are:
method - the request method
scheme - the URI scheme
host - the URI authority (host:port)
path - the URI path
query - the URI query string
mime - the MIME type (for a response-body filter)
The filters are applied only when all the the parameters match the
request or the response. All these named parameters have default
values, which are:
method => 'OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,CONNECT'
scheme => 'http'
host => ''
path => ''
query => ''
mime => 'text/*'
The "mime" parameter is a glob-like string, with a required "/"
character and a "*" as a joker. Thus, "*/*" matches all responses, and
"" those with no "Content-Type:" header. To match any reponse (with or
without a "Content-Type:" header), use "undef".
The "mime" parameter is only meaningful with the "response-body" filter
stack. It is ignored if passed to any other filter stack.
The "method" and "scheme" parameters are strings consisting of comma-
separated values. The "host" and "path" parameters are regular
expressions.
A match routine is compiled by the proxy and used to check if a
particular request or response must be filtered through a particular
filter.
It is also possible to push several filters on the same stack with the
same match subroutine:
# convert italics to bold
$proxy->push_filter(
mime => 'text/html',
response => HTTP::Proxy::BodyFilter::tags->new(),
response => HTTP::Proxy::BodyFilter::simple->new(
sub { ${ $_[1] } =~ s!(</?)i>!$1b>!ig }
)
);
For more details regarding the creation of new filters, check the
"HTTP::Proxy::HeaderFilter" and "HTTP::Proxy::BodyFilter"
documentation.
Here's an example of subclassing a base filter class:
# fixes a common typo ;-)
# but chances are that this will modify a correct URL
{
package FilterPerl;
use base qw( HTTP::Proxy::BodyFilter );
sub filter {
my ( $self, $dataref, $message, $protocol, $buffer ) = @_;
$$dataref =~ s/PERL/Perl/g;
}
}
$proxy->push_filter( response => FilterPerl->new() );
Other examples can be found in the documentation for
"HTTP::Proxy::HeaderFilter", "HTTP::Proxy::BodyFilter",
"HTTP::Proxy::HeaderFilter::simple", "HTTP::Proxy::BodyFilter::simple".
# a simple anonymiser
# see eg/anonymiser.pl for the complete code
$proxy->push_filter(
mime => undef,
request => HTTP::Proxy::HeaderFilter::simple->new(
sub { $_[0]->remove_header(qw( User-Agent From Referer Cookie )) },
),
response => HTTP::Proxy::HeaderFilter::simple->new(
sub { $_[0]->remove_header(qw( Set-Cookie )); },
)
);
IMPORTANT: If you use your own "LWP::UserAgent", you must install it
before your calls to "push_filter()", otherwise the match method will
make wrong assumptions about the schemes your agent supports.
NOTE: It is likely that possibility of changing the agent or the daemon
may disappear in future versions.
METHODS
Constructor and initialisation
new()
The "new()" method creates a new HTTP::Proxy object. All attributes
can be passed as parameters to replace the default.
Parameters that are not "HTTP::Proxy" attributes will be ignored
and passed to the chosen "HTTP::Proxy::Engine" object.
init()
"init()" initialise the proxy without starting it. It is usually
not needed.
This method is called by "start()" if needed.
push_filter()
The "push_filter()" method is used to add filters to the proxy. It
is fully described in section FILTERS.
Accessors and mutators
The HTTP::Proxy has several accessors and mutators.
Called with arguments, the accessor returns the current value. Called
with a single argument, it sets the current value and returns the
previous one, in case you want to keep it.
If you call a read-only accessor with a parameter, this parameter will
be ignored.
The defined accessors are (in alphabetical order):
agent
The LWP::UserAgent object used internally to connect to remote
sites.
chunk
The chunk size for the LWP::UserAgent callbacks.
client_socket (read-only)
The socket currently connected to the client. Mostly useful in
filters.
client_headers
This attribute holds a reference to the client headers set up by
LWP::UserAgent ("Client-Aborted", "Client-Bad-Header-Line",
"Client-Date", "Client-Junk", "Client-Peer", "Client-Request-Num",
"Client-Response-Num", "Client-SSL-Cert-Issuer",
"Client-SSL-Cert-Subject", "Client-SSL-Cipher",
"Client-SSL-Warning", "Client-Transfer-Encoding",
"Client-Warning").
They are removed by the filter HTTP::Proxy::HeaderFilter::standard
from the request and response objects received by the proxy.
If a filter (such as a SSL certificate verification filter) need to
access them, it must do it through this accessor.
conn (read-only)
The number of connections processed by this HTTP::Proxy instance.
daemon
The HTTP::Daemon object used to accept incoming connections. (You
usually never need this.)
engine
The HTTP::Proxy::Engine object that manages the child processes.
hop_headers
This attribute holds a reference to the hop-by-hop headers
("Connection", "Keep-Alive", "Proxy-Authenticate",
"Proxy-Authorization", "TE", "Trailers", "Transfer-Encoding",
"Upgrade").
They are removed by the filter HTTP::Proxy::HeaderFilter::standard
from the request and response objects received by the proxy.
If a filter (such as a proxy authorisation filter) need to access
them, it must do it through this accessor.
host
The proxy HTTP::Daemon host (default: 'localhost').
This means that by default, the proxy answers only to clients on
the local machine. You can pass a specific interface address or
""/"undef" for any interface.
This default prevents your proxy to be used as an anonymous proxy
by script kiddies.
known_methods( @groups ) (read-only)
This method returns all HTTP (and extensions to HTTP) known to
"HTTP::Proxy". Methods are grouped by type. Known method groups
are: "HTTP", "WebDAV" and "DeltaV".
Called with an empty list, this method will return all known
methods. This method is case-insensitive, and will "carp()" if an
unknown group name is passed.
logfh
A filehandle to a logfile (default: *STDERR).
logmask( [$mask] )
Be verbose in the logs (default: NONE).
Here are the various elements that can be added to the mask (their
values are powers of 2, starting from 0 and listed here in
ascending order):
NONE - Log only errors
PROXY - Proxy information
STATUS - Requested URL, reponse status and total number
of connections processed
PROCESS - Subprocesses information (fork, wait, etc.)
SOCKET - Information about low-level sockets
HEADERS - Full request and response headers are sent along
FILTERS - Filter information
DATA - Data received by the filters
CONNECT - Data transmitted by the CONNECT method
ENGINE - Engine information
ALL - Log all of the above
If you only want status and process information, you can use:
$proxy->logmask( STATUS | PROCESS );
Note that all the logging constants are not exported by default,
but by the ":log" tag. They can also be exported one by one.
loop (read-only)
Internal. False when the main loop is about to be broken.
max_clients
maxchild
The maximum number of child process the HTTP::Proxy object will
spawn to handle client requests (default: depends on the engine).
This method is currently delegated to the HTTP::Proxy::Engine
object.
"maxchild" is deprecated and will disappear.
max_connections
maxconn
The maximum number of TCP connections the proxy will accept before
returning from start(). 0 (the default) means never stop accepting
connections.
"maxconn" is deprecated.
Note: "max_connections" will be deprecated soon, for two reasons:
1) it is more of an HTTP::Proxy::Engine attribute, 2) not all
engines will support it.
max_keep_alive_requests
maxserve
The maximum number of requests the proxy will serve in a single
connection. (same as "MaxRequestsPerChild" in Apache)
"maxserve" is deprecated.
port
The proxy "HTTP::Daemon" port (default: 8080).
request
The request originaly received by the proxy from the user-agent,
which will be modified by the request filters.
response
The response received from the origin server by the proxy. It is
normally "undef" until the proxy actually receives the beginning of
a response from the origin server.
If one of the request filters sets this attribute, it "short-
circuits" the request/response scheme, and the proxy will return
this response (which is NOT filtered through the response filter
stacks) instead of the expected origin server response. This is
useful for caching (though Squid does it much better) and proxy
authentication, for example.
stash
The stash is a hash where filters can store data to share between
them.
The stash() method can be used to set the whole hash (with a HASH
reference). To access individual keys simply do:
$proxy->stash( 'bloop' );
To set it, type:
$proxy->stash( bloop => 'owww' );
It's also possibly to get a reference to the stash:
my $s = $filter->proxy->stash();
$s->{bang} = 'bam';
# $proxy->stash( 'bang' ) will now return 'bam'
Warning: since the proxy forks for each TCP connection, the data is
only shared between filters in the same child process.
timeout
The timeout used by the internal LWP::UserAgent (default: 60).
url (read-only)
The url where the proxy can be reached.
via The content of the Via: header. Setting it to an empty string will
prevent its addition. (default: "$hostname (HTTP::Proxy/$VERSION)")
x_forwarded_for
If set to a true value, the proxy will send the "X-Forwarded-For:"
header. (default: true)
Connection handling methods
start()
This method works like Tk's "MainLoop": you hand over control to
the "HTTP::Proxy" object you created and configured.
If "maxconn" is not zero, "start()" will return after accepting at
most that many connections. It will return the total number of
connexions.
serve_connections()
This is the internal method used to handle each new TCP connection
to the proxy.
Other methods
log( $level, $prefix, $message )
Adds $message at the end of "logfh", if $level matches "logmask".
The "log()" method also prints a timestamp.
The output looks like:
[Thu Dec 5 12:30:12 2002] ($$) $prefix: $message
where $$ is the current processus id.
If $message is a multiline string, several log lines will be
output, each line starting with $prefix.
is_protocol_supported( $scheme )
Returns a boolean indicating if $scheme is supported by the proxy.
This method is only used internaly.
It is essential to allow HTTP::Proxy users to create "pseudo-
schemes" that LWP doesn't know about, but that one of the proxy
filters can handle directly. New schemes are added as follows:
$proxy->init(); # required to get an agent
$proxy->agent->protocols_allowed(
[ @{ $proxy->agent->protocols_allowed }, 'myhttp' ] );
new_connection()
Increase the proxy's TCP connections counter. Only used by
"HTTP::Proxy::Engine" objects.
Apache-like attributes
"HTTP::Proxy" has several Apache-like attributes that control the way
the HTTP and TCP connections are handled.
The following attributes control the TCP connection. They are passed to
the underlying "HTTP::Proxy::Engine", which may (or may not) use them
to change its behaviour.
start_servers
Number of child process to fork at the beginning.
max_clients
Maximum number of concurrent TCP connections (i.e. child
processes).
max_requests_per_child
Maximum number of TCP connections handled by the same child
process.
min_spare_servers
Minimum number of inactive child processes.
max_spare_servers
Maximum number of inactive child processes.
Those attributes control the HTTP connection:
keep_alive
Support for keep alive HTTP connections.
max_keep_alive_requests
Maximum number of HTTP connections within a single TCP connection.
keep_alive_timeout
Timeout for keep-alive connection.
EXPORTED SYMBOLS
No symbols are exported by default. The ":log" tag exports all the
logging constants.
BUGS
This module does not work under Windows, but I can't see why, and do
not have a development platform under that system. Patches and
explanations very welcome.
I guess it is because "fork()" is not well supported.
$proxy->maxchild(0);
However, David Fishburn says:
This did not work for me under WinXP - ActiveState Perl 5.6, but it
DOES work on WinXP ActiveState Perl 5.8.
Several people have tried to help, but we haven't found a way to make
it work correctly yet.
As from version 0.16, the default engine is
"HTTP::Proxy::Engine::NoFork". Let me know if it works better.
SEE ALSO
HTTP::Proxy::Engine, HTTP::Proxy::BodyFilter,
HTTP::Proxy::HeaderFilter, the examples in eg/.
AUTHOR
Philippe "BooK" Bruhat, <book@cpan.org>.
The module has its own web page at http://http-proxy.mongueurs.net/
<http://http-proxy.mongueurs.net/> complete with older versions and
repository snapshot.
There are also two mailing-lists: http-proxy@mongueurs.net for general
discussion about "HTTP::Proxy" and http-proxy-cvs@mongueurs.net for CVS
commits emails.
THANKS
Many people helped me during the development of this module, either on
mailing-lists, IRC or over a beer in a pub...
So, in no particular order, thanks to the libwww-perl team for such a
terrific suite of modules, perl-qa (tips for testing), the French Perl
Mongueurs (for code tricks, beers and encouragements) and my growing
user base... ";-)"
I'd like to particularly thank Dan Grigsby, who's been using
"HTTP::Proxy" since 2003 (before the filter classes even existed). He
is apparently making a living from a product based on "HTTP::Proxy".
Thanks a lot for your confidence in my work!
COPYRIGHT
Copyright 2002-2008, Philippe Bruhat.
LICENSE
This module is free software; you can redistribute it or modify it
under the same terms as Perl itself.
perl v5.14.1 2011-07-20 HTTP::Proxy(3)