Munin::Plugin::SNMP(3)User Contributed Perl DocumentatioMunin::Plugin::SNMP(3)NAMEMunin::Plugin::SNMP - Net::SNMP subclass for Munin plugins
SYNOPSIS
The Munin::Plugin::SNMP module extends Net::SNMP with methods useful
for Munin plugins.
SNMP CONFIGURATION
SNMP plugins (that use this module) share a common configuration
interface implemented in the function session(). Please see the
documentation for that function for complete instructions and examples
on how to configure SNMP. The documentation is located there to ensure
that it is up to date and matches the code.
DEBUGGING
Additional debugging messages can be enabled by setting
$Munin::Plugin::SNMP::DEBUG, $Munin::Plugin::DEBUG, or by exporting the
"MUNIN_DEBUG" environment variable before running the plugin (by
passing the "--pidebug" option to "munin-run", for instance).
METHODSconfig_session() - Decode environment to get the needed plugin
configuration parameters
($host, $port, $version, $tail) = Munin::Plugin::SNMP->config_session();
This is a convenience function for the "config" part of the plugin - it
decodes the environment/plugin name to retrieve the information needed
in the configuration phase. It returns a 4 tuple consisting of:
1) the host name
2) the UDP port to use
3) the SNMP version to use (3 for version 3, 2 for version 1 or 2c)
4) the tail of the plugin name: whatever is left of the plugin name
after "snmp_<host>_".
The tail can be interesting for the "fetch" part of the plugin as well.
session([optional Net::SNMP options]) - create new Munin::Plugin::SNMP
object
$session = Munin::Plugin::SNMP->session();
This method overrides the Net::SNMP constructor to get the connection
information from the plugin name and/or environment. Please note that
no error string is returned. The function handles errors internally -
giving a error message and calling die. Calling die is the right thing
to do.
The host name is taken from the plugin symlink, which must be on the
form "snmp[v3]_<hostname>_<plugin_name>[_args]".
The "v3" form is taken to mean that SNMPv3 is to be used. It is also a
name trick providing a separate "namespace" for devices that use SNMPv3
so it can be configured separately in munin/plugin-conf.d/ files.
E.g.:
[snmp_*]
env.version 2
env.community public
[snmpv3_*]
env.v3username snmpoperator
env.v3authpassword s3cr1tpa55w0rd
See below for how to configure for each different case. The first case
above shows Munin's default configuration.
NOTE: munin-node-configure does not yet utilize the "v3" thing.
The following environment variables are consulted:
"env.host"
If the plugin name (symlink) does not contain the host name this is
used as the host name to connect to.
The host name must be specified, but is usually specified in the
plugin name. If the hostname somehow does not resolve in DNS (or
the hosts file) it is possible to do this:
[snmp_*]
env.version 2c
env.community floppa
[snmp_switch1.langfeldt.net]
env.host 192.168.2.45
[snmp_switch2.langfeldt.net]
env.host 192.168.2.46
"env.port"
The port to connect to. Default 161.
"env.timeout"
The timeout in seconds to use. Default 5.
"env.version"
The SNMP version to use for the connection. One of 1, 2, 3, snmpv1,
snmpv2c or snmpv3. SNMP v2 is better as it supports bulk
operations. Therefore 2 is the default in "Munin::Plugin::SNMP".
If your device supports v3 that may be even better as it supports
proper security - but the encryption may slow things down.
Security is handled differently for versions 1/2c and 3. See
below.
SNMP 1/2c authentication
"env.community"
The community name for version 1 and 2c agents. The default is
'public'. If this works your device is probably very insecure and
needs a security checkup.
SNMP 3 authentication
SNMP v3 has three security levels. Lowest is "noAuthNoPriv", which
provides neither authentication nor encryption. If a username and
"authpassword" are given it goes up to "authNoPriv", and the
connection is authenticated. If "privpassword" is given the
security level becomes "authPriv" - the connection is authenticated
and encrypted.
Note: Encryption can slow down slow or heavily loaded network
devices. For most uses "authNoPriv" will be secure enough -- the
password is sent over the network encrypted in any case.
"Munin::Plugin::SNMP" does not support ContextEngineIDs and such
for authentication/privacy. If you see the need and know how it
should be done please send patches!
For further reading on SNMP v3 security models please consult
RFC3414 and the documentation for Net::SNMP.
If version is set to 3 or snmpv3 the following variables are used
to define authentication:
"env.v3username"
Username. There is no default.
"env.v3authpassword"
Authentication password. Optional when encryption is also
enabled, in which case defaults to the privacy password
("env.v3privpassword"). The password is sent encrypted (one
way hash) over the network.
"env.v3authprotocol"
Authentication protocol. One of 'md5' or 'sha' (HMAC-MD5-96,
RFC1321 and SHA-1/HMAC-SHA-96, NIST FIPS PIB 180, RFC2264).
The default is 'md5'.
"env.v3privpassword"
Privacy password to enable encryption. An empty ('') password
is considered as no password and will not enable encryption.
Privacy requires a v3privprotocol as well as a v3authprotocol
and a v3authpassword, but all of these are defaulted (to 'des',
'md5', and the v3privpassword value, respectively) and may
therefore be left unspecified.
"env.v3privprotocol"
If the v3privpassword is set this setting controls what kind of
encryption is used to achieve privacy in the session. Only the
very weak 'des' encryption method is supported officially. The
default is 'des'.
The implementing perl module (Net::SNMP) also supports '3des'
(CBC-3DES-EDE aka Triple-DES, NIST FIPS 46-3) as specified in
IETF draft-reeder-snmpv3-usm-3desede. Whether or not this
works with any particular device, we do not know.
get_hash() - retrieve a table as a hash of hashes
$result = $session->get_hash(
[-callback => sub {},] # non-blocking
[-delay => $seconds,] # non-blocking
[-contextengineid => $engine_id,] # v3
[-contextname => $name,] # v3
-baseoid => $oid,
-cols => \%columns
);
This method transforms the -baseoid and -cols to a array of -columns
and calls "get_entries()" with all the other arguments. It then
transforms the data into a hash of hashes in the following manner:
The keys of the main hash are the last element(s) of the OIDs, after
$oid and the matching keys from %columns are removed. The values are
hashes with keys corresponding to the values of %columns hash and
values from the subtables corresponding to the keys of %columns.
For this to work, all the keys of "-cols" must have the same number of
elements. Also, don't try to specify a next-to-next-to-leaf-node
baseoid, the principle it breaks both "get_entries" and the logic in
"get_hash".
If (all) the OIDs are unavailable a defined but empty hashref is
returned.
Example:
$session->get_hash(
-baseoid => '1.3.6.1.2.1.2.2.1', # IF-MIB
-cols => {
1 => 'index',
2 => 'descr',
4 => 'mtu',
}
);
given the following SNMP table:
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifDescr.1 = STRING: lo0
IF-MIB::ifDescr.2 = STRING: lna0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 32768
IF-MIB::ifMtu.2 = INTEGER: 1500
...
will return a hash like this:
'1' => {
'index' => '1',
'mtu' => '32768',
'descr' => 'lo0'
},
'2' => {
'index' => '2',
'descr' => 'lna0',
'mtu' => '1500'
}
get_single() - Retrieve a single value by OID
$uptime = $session->get_single("1.3.6.1.2.1.1.3.0") || 'U';
If the call fails to get a value the above call sets $uptime to 'U'
which Munin interprets as "Undefined" and handles accordingly.
If you stop to think about it you should probably use "get_hash()" (it
gets too much, but is good for arrays) or "get_entries()" - it gets
exactly what you want, so you mus
get_by_regex() - Retrive table of values filtered by regex applied to the
value
This example shows the usage for a netstat plugin.
my $tcpConnState = "1.3.6.1.2.1.6.13.1.1.";
my $connections = $session->get_by_regex($tcpConnState, "[1-9]");
It gets all OIDs based at $tcpConnState and only returns the ones that
contain a number in the value.
TODO
Lots.
BUGS
Ilmari wrote: "get_hash()" doesn't handle tables with sparse indices.
Nicolai Langfeldt: Actually I think it does.
SEE ALSO
Net::SNMP
AUTHOR
Dagfinn Ilmari Mannsaaker, Nicolai Langfeldt Rune Nordboe Skillingstad
added timeout support.
COPYRIGHT/License.
Copyright (c) 2004-2009 Dagfinn Ilmari Mannsaaker and Nicolai
Langfeldt.
All rights reserved. This program is free software; you can
redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation; version 2
dated June, 1991.
perl v5.20.3 2016-02-19 Munin::Plugin::SNMP(3)
