NAL_CONNECTION_NEW(2) distcache NAL_CONNECTION_NEW(2)NAME
NAL_CONNECTION_new, NAL_CONNECTION_free, NAL_CONNECTION_create,
NAL_CONNECTION_create_pair, NAL_CONNECTION_create_dummy, NAL_CONNEC‐
TION_set_size, NAL_CONNECTION_get_read, NAL_CONNECTION_get_send,
NAL_CONNECTION_io, NAL_CONNECTION_io_cap, NAL_CONNECTION_is_estab‐
lished, NAL_CONNECTION_add_to_selector, NAL_CONNECTION_del_from_selec‐
tor - libnal connection functions
SYNOPSIS
#include <libnal/nal.h>
#define NAL_SELECT_FLAG_READ (unsigned int)0x0001
#define NAL_SELECT_FLAG_SEND (unsigned int)0x0002
#define NAL_SELECT_FLAG_RW (NAL_SELECT_FLAG_READ ⎪ NAL_SELECT_FLAG_SEND)
NAL_CONNECTION *NAL_CONNECTION_new(void);
void NAL_CONNECTION_free(NAL_CONNECTION *conn);
void NAL_CONNECTION_reset(NAL_CONNECTION *conn);
int NAL_CONNECTION_create(NAL_CONNECTION *conn, const NAL_ADDRESS *addr);
int NAL_CONNECTION_accept(NAL_CONNECTION *conn, NAL_LISTENER *list,
NAL_SELECTOR *sel);
int NAL_CONNECTION_create_pair(NAL_CONNECTION *conn1, NAL_CONNECTION *conn2,
unsigned int def_buffer_size);
#if 0
int NAL_CONNECTION_create_dummy(NAL_CONNECTION *conn,
unsigned int def_buffer_size);
#endif
int NAL_CONNECTION_set_size(NAL_CONNECTION *conn, unsigned int size);
NAL_BUFFER *NAL_CONNECTION_get_read(NAL_CONNECTION *conn);
NAL_BUFFER *NAL_CONNECTION_get_send(NAL_CONNECTION *conn);
const NAL_BUFFER *NAL_CONNECTION_get_read_c(const NAL_CONNECTION *conn);
const NAL_BUFFER *NAL_CONNECTION_get_send_c(const NAL_CONNECTION *conn);
int NAL_CONNECTION_io(NAL_CONNECTION *conn, NAL_SELECTOR *sel);
int NAL_CONNECTION_io_cap(NAL_CONNECTION *conn, NAL_SELECTOR *sel,
unsigned int max_read, unsigned int max_send);
int NAL_CONNECTION_is_established(const NAL_CONNECTION *conn);
void NAL_CONNECTION_add_to_selector(const NAL_CONNECTION *conn,
NAL_SELECTOR *sel);
void NAL_CONNECTION_add_to_selector_ex(const NAL_CONNECTION *conn,
NAL_SELECTOR *sel,
unsigned int flags);
void NAL_CONNECTION_del_from_selector(const NAL_CONNECTION *conn,
NAL_SELECTOR *sel);
DESCRIPTIONNAL_CONNECTION_new() allocates and initialises a new NAL_CONNECTION
object.
NAL_CONNECTION_free() destroys a NAL_CONNECTION object.
NAL_CONNECTION_reset() will, if necessary, cleanup any prior state in
conn so that it can be reused in NAL_CONNECTION_create(). Internally,
there are other optimisations and benefits to using NAL_CONNEC‐
TION_reset() instead of NAL_CONNECTION_free() and NAL_CONNECTION_new()
- the implementation can try to avoid repeated reallocation and reini‐
tialisation of state, only doing full cleanup and reinitialisation when
necessary.
NAL_CONNECTION_create() will attempt to connect to the address repre‐
sented by addr. If this succeeds, it means either that the underlying
connection of conn is established, or that a non-blocking connect was
successfully initiated but has not yet completed (it may still be
rejected by the peer eventually). Typically, unix domain sockets con‐
nect or fail immediately, and usually TCP/IPv4 connect non-blocking,
though this may not be true for some interfaces such as `localhost'.
NAL_CONNECTION_is_established() can be used to distinguish the differ‐
ence. The size of the connection's underlying read and send NAL_BUFFERs
is initialised to the default that was created in addr. See the
"NOTES" section for more discussion of connection semantics.
NAL_CONNECTION_accept() will not block waiting for incoming connection
requests on list, but will accept any pending connection request that
had already been identified by a previous call to NAL_SELEC‐
TOR_select(2) on sel. See "NOTES".
NAL_CONNECTION_create_pair() will initialise conn1 and conn2 to be end-
points of a single connection. This is typically implemented using the
socketpair(2) function, and is designed to allow for an IPC mechanism
that integrates with libnal. def_buffer_size will control the size of
the read and send buffers of both connections if the functions succeed.
See the EXAMPLES section for some uses of ``pairs''.
NAL_CONNECTION_create_dummy() will implement a virtual FIFO that has no
underlying network resource associated with it. Writing data to the
connection amounts to pushing data onto the front of the FIFO, and
reading data from the connection amounts to popping data off the end of
the FIFO. The size of the FIFO is specified by def_buffer_size. See the
"BUGS" section for a note on using these connection types with
NAL_SELECTOR.
NAL_CONNECTION_set_size() will resize the read and send buffers of conn
to size. The default size of those buffers is inherited from the set‐
ting created in the NAL_ADDRESS that initialised conn, or if conn was
accepted from a NAL_LISTENER object, then from the address that created
the listener. The individual buffers can be resized independantly by
using the following two functions to obtain the buffesr and using
NAL_BUFFER functions directly.
NAL_CONNECTION_get_read() and NAL_CONNECTION_get_send() return the read
and send buffers of conn. This is how reading and writing is performed
on conn, as NAL_BUFFER functions may be used on these buffers directly.
NAL_CONNECTION_get_read_c() and NAL_CONNECTION_get_send_c() perform the
same function but on a constant conn parameter and returning constant
pointers to the corresponding buffers.
NAL_CONNECTION_io() will perform any network input/output that is pos‐
sible given the state in sel. Unless conn had been added to sel via
NAL_SELECTOR_add_conn() (or its `_ex' variant) and a resulting call to
NAL_SELECTOR_select() had revealed readability and/or writability on
conn, this function will silently succeed. Otherwise it will attempt to
perform whatever reading or writing was required. If this function
fails, that indicates that the connection is no longer valid - this
represents a disconnection by the peer, the result of a non-blocking
connect that had been initiated but was unable to connect, or some net‐
work error that makes conn unusable. See the "NOTES" section.
NAL_CONNECTION_io_cap() is a version of NAL_CONNECTION_io() that allows
the caller to specify a limit on the maximum amount conn should read
from, or send to, the network. Whether this amount is read or sent (or
even whether reading or sending takes place at all) depends on; the
data (and space) available is in the connection's buffers, what the
results of the last select on sel were, and how much data the host sys‐
tem's networking support will accept or provide to conn.
NAL_CONNECTION_is_established() is useful for determining when a non-
blocking connect has completed. See the "NOTES" section.
NAL_CONNECTION_add_to_selector() registers conn with the selector sel
for any events relevant to it. NAL_CONNECTION_del_from_selector() can
be used to reverse this if called before any subsequent call to
NAL_SELECTOR_select(). NAL_CONNECTION_add_to_selector_ex() extends
NAL_CONNECTION_add_to_selector() by allowing a bit-mask to be supplied
to control what events the connection can be selected on, these flags
are indicated above prefixed with NAL_SELECT_FLAG_.
RETURN VALUESNAL_CONNECTION_new() returns a valid NAL_CONNECTION object on success,
NULL otherwise.
NAL_CONNECTION_free(), NAL_CONNECTION_reset(), NAL_CONNEC‐
TION_add_to_selector(), NAL_CONNECTION_add_to_selector_ex(), and
NAL_CONNECTION_del_from_selector() have no return value.
NAL_CONNECTION_get_read(), NAL_CONNECTION_get_send(), NAL_CONNEC‐
TION_get_read_c(), and NAL_CONNECTION_get_send_c() return pointers to
the connection's buffer objects or NULL for failure.
NAL_CONNECTION_accept() returns non-zero if a connection was accepted
and is represented by the provided NAL_CONNECTION object, or zero if no
connection attempt was pending (or if there was but an error prevented
the accept operation).
All other NAL_CONNECTION functions return zero for failure or false,
and non-zero for success or true.
NOTES
A NAL_CONNECTION object encapsulates two NAL_BUFFER objects and a non-
blocking socket. Any data that has been read from the socket is placed
in the read buffer, and applications write data into the send buffer
for it to be (eventually) written out to the socket. The NAL_SELECTOR
type provides the ability to poll for any requested network events and
then allow connections and listeners to perform their network
input/output based on the results.
NAL_CONNECTION_add_to_selector() uses the following logic; the connec‐
tion is always selected for exception events, and will be selected for
readability if its read buffer is not full and writability if its send
buffer is not empty.
NAL_CONNECTION_io() is used after calling NAL_CONNECTION_add_to_selec‐
tor() and a subsequent call to NAL_SELECTOR_select(). It observes the
following logic; if an exception event has occured it returns failure,
if readability is indicated it will read incoming data up to the limit
of the available space in the read buffer, and if writability is indi‐
cated it will send as much of the send buffer's data as possible. If
NAL_CONNECTION_io() returns failure, the connection is considered bro‐
ken for some reason and no further I/O operations should be attempted
(the behaviour is undefined). NB: The connection object is not automat‐
ically cleaned up so as to allow the caller to continue reading any
data in the read buffer and/or examine any unsent data in the send buf‐
fer.
The above is almost true, BTW :-) The special case is that of non-
blocking connects. If NAL_CONNECTION_create() cannot immediately con‐
nect without blocking, it will return success but subsequent calls to
NAL_CONNECTION_is_established() will reveal that the connection is not
yet complete. Any connection that is not complete will request selec‐
tion for sendability inside NAL_CONNECTION_add_to_selector(), whether
the application has provided data to send or not. The completion (or
failure) of the non-blocking connect will thus cause any subsequent
NAL_SELECTOR_select() operation to break. As with all other semantics,
it is the follow up call to NAL_CONNECTION_io() that changes the state
of the connection object - if it returns failure, the non-blocking con‐
nect failed. If it returns success, you should still call NAL_CONNEC‐
TION_is_established() to determine if the connection is complete, as
the selector could have broken because of signals or network events on
other objects.
NAL_CONNECTION_accept() will return immediately, and will only succeed
if the NAL_LISTENER object had already been added to the selector using
NAL_LISTENER_add_to_select(), the selector had been subsequently
selected using NAL_SELECTOR_select(2), and this indicated an incoming
connection request waiting on the listener.
It should be noted that the actual transport in use is virtualised to
allow for multiple transports and, because of this, multiple semantics
for how the network functionality behaves. TCP/IPv4 and unix domain
socket based connections, as well as connection pairs from NAL_CONNEC‐
TION_create_pair(), operate very much as described here. The FIFO con‐
nection type, created by NAL_CONNECTION_create_dummy() is not yet con‐
sistent with this and is described in the "BUGS" section.
BUGS
Dummy FIFO connections created using NAL_CONNECTION_create_dummy()
should be trivially selectable if anyone's daft enough to try. Ie. if
you add a dummy connection to a selector, the NAL_SELECTOR_select()
should break instantly if the FIFO is non-empty otherwise the FIFO
should have no influence at all on the real select(2). Right now,
NAL_CONNECTION_add_to_selector() silently ignores dummy connections
completely.
EXAMPLES
A typical state-machine implementation using a single connection is
illustrated here (without error-checking);
NAL_BUFFER *c_read, *c_send;
NAL_SELECTOR *sel = NAL_SELECTOR_new();
NAL_CONNECTION *conn = NAL_CONNECTION_new();
NAL_ADDRESS *addr = retrieve_the_desired_address();
/* Setup */
NAL_CONNECTION_create(conn, addr);
c_read = NAL_CONNECTION_get_read(conn);
c_send = NAL_CONNECTION_get_send(conn);
/* Loop */
do {
/* This is where the state-machine code should process as much data as
* possible from 'c_read' and/or produce as much output to 'c_send' as
* it can. */
...
... user code
...
/* block on (relevant) network events for 'conn' */
NAL_CONNECTION_add_to_selector(conn, sel);
NAL_SELECTOR_select(sel, 0, 0);
/* Do network I/O after the above blocking select and continue looping
* only if the connection is still alive. */
} while(NAL_CONNECTION_io(conn, sel));
An example of using a connection pair (with 2 Kb read and send buffers
for each connection) to create IPC between a parent process and its
child (again, no error checking);
NAL_CONNECTION *ipc_to_parent = NAL_CONNECTION_new();
NAL_CONNECTION *ipc_to_child = NAL_CONNECTION_new();
/* Setup */
NAL_CONNECTION_create_pair(ipc_to_parent, ipc_to_child, 2048);
/* Create child process */
switch(fork()) {
case 0:
/* Inside the child process, close our copy of the parent's side */
NAL_CONNECTION_free(ipc_to_child);
/* Do child process things, and use 'ipc_to_parent' to communicate
* with the parent. */
do_child_logic(ipc_to_parent);
exit(0);
default:
/* Inside the parent process, close our copy of the child's side */
NAL_CONNECTION_free(ipc_to_parent);
break;
}
/* Continue in the parent process, and use 'ipc_to_child' to communicate
* with the child. */
do_parent_logic(ipc_to_child);
Note that these connection pairs can also be a useful way of handling
process termination that allow you to bypass signal handling alto‐
gether. If a child process terminates, the connection between the pair
will be broken and so this will be noticed in the parent process by any
selector selecting on the ipc_to_child connection - the subsequent
NAL_CONNECTION_io() operation will fail indicating that the child
process is dead (or in the process of dying) and so the parent could
immediately call wait(2) or waitpid(2). Whether the SIGCHLD signal
arrives before the NAL_CONNECTION_io() call or not is not too impor‐
tant, at worst it might prematurely interrupt NAL_SELECTOR_select()
(causing it to return zero) so that a redundant loop of the state-
machine runs before the next select operation will notice the discon‐
nection. If you already need IPC between the parent and child for
exchange of data anyway, this mechanism could be useful in avoiding
global variables, signal handlers, and the associated difficulties.
SEE ALSONAL_CONNECTION_new(2) - Functions for the NAL_CONNECTION type.
NAL_LISTENER_new(2) - Functions for the NAL_LISTENER type.
NAL_SELECTOR_new(2) - Functions for the NAL_SELECTOR type.
NAL_BUFFER_new(2) - Functions for the NAL_BUFFER type.
distcache(8) - Overview of the distcache architecture.
http://www.distcache.org/ - Distcache home page.
AUTHOR
This toolkit was designed and implemented by Geoff Thorpe for Crypto‐
graphic Appliances Incorporated. Since the project was released into
open source, it has a home page and a project environment where devel‐
opment, mailing lists, and releases are organised. For problems with
the software or this man page please check for new releases at the
project web-site below, mail the users mailing list described there, or
contact the author at geoff@geoffthorpe.net.
Home Page: http://www.distcache.org
1.4.5 2004.03.23 NAL_CONNECTION_NEW(2)