Parse::Yapp(3) User Contributed Perl Documentation Parse::Yapp(3)NAMEParse::Yapp - Perl extension for generating and using LALR parsers.
SYNOPSIS
yapp -m MyParser grammar_file.yp
...
use MyParser;
$parser=new MyParser();
$value=$parser->YYParse(yylex => \&lexer_sub, yyerror => \&error_sub);
$nberr=$parser->YYNberr();
$parser->YYData->{DATA}= [ 'Anything', 'You Want' ];
$data=$parser->YYData->{DATA}[0];
DESCRIPTIONParse::Yapp (Yet Another Perl Parser compiler) is a collection of
modules that let you generate and use yacc like thread safe (reentrant)
parsers with perl object oriented interface.
The script yapp is a front-end to the Parse::Yapp module and let you
easily create a Perl OO parser from an input grammar file.
The Grammar file
"Comments"
Through all your files, comments are either Perl style, introduced
by # up to the end of line, or C style, enclosed between /* and
*/.
"Tokens and string literals"
Through all the grammar files, two kind of symbols may appear: Non-
terminal symbols, called also left-hand-side symbols, which are the
names of your rules, and Terminal symbols, called also Tokens.
Tokens are the symbols your lexer function will feed your parser
with (see below). They are of two flavours: symbolic tokens and
string literals.
Non-terminals and symbolic tokens share the same identifier syntax:
[A-Za-z][A-Za-z0-9_]*
String literals are enclosed in single quotes and can contain
almost anything. They will be output to your parser file double-
quoted, making any special character as such. '"', '$' and '@' will
be automatically quoted with '\', making their writing more
natural. On the other hand, if you need a single quote inside your
literal, just quote it with '\'.
You cannot have a literal 'error' in your grammar as it would
confuse the driver with the error token. Use a symbolic token
instead. In case you inadvertently use it, this will produce a
warning telling you you should have written it error and will treat
it as if it were the error token, which is certainly NOT what you
meant.
"Grammar file syntax"
It is very close to yacc syntax (in fact, Parse::Yapp should
compile a clean yacc grammar without any modification, whereas the
opposite is not true).
This file is divided in three sections, separated by "%%":
header section
%%
rules section
%%
footer section
The Header Section section may optionally contain:
* One or more code blocks enclosed inside "%{" and "%}" just like
in yacc. They may contain any valid Perl code and will be
copied verbatim at the very beginning of the parser module.
They are not as useful as they are in yacc, but you can use
them, for example, for global variable declarations, though you
will notice later that such global variables can be avoided to
make a reentrant parser module.
* Precedence declarations, introduced by %left, %right and
%nonassoc specifying associativity, followed by the list of
tokens or litterals having the same precedence and
associativity. The precedence beeing the latter declared will
be having the highest level. (see the yacc or bison manuals
for a full explanation of how they work, as they are
implemented exactly the same way in Parse::Yapp)
* %start followed by a rule's left hand side, declaring this rule
to be the starting rule of your grammar. The default, when
%start is not used, is the first rule in your grammar section.
* %token followed by a list of symbols, forcing them to be
recognized as tokens, generating a syntax error if used in the
left hand side of a rule declaration. Note that in
Parse::Yapp, you don't need to declare tokens as in yacc: any
symbol not appearing as a left hand side of a rule is
considered to be a token. Other yacc declarations or
constructs such as %type and %union are parsed but (almost)
ignored.
* %expect followed by a number, suppress warnings about number of
Shift/Reduce conflicts when both numbers match, a la bison.
The Rule Section contains your grammar rules:
A rule is made of a left-hand-side symbol, followed by a ':' and
one or more right-hand-sides separated by '|' and terminated by a
';':
exp: exp '+' exp
| exp '-' exp
;
A right hand side may be empty:
input: #empty
| input line
;
(if you have more than one empty rhs, Parse::Yapp will issue a
warning, as this is usually a mistake, and you will certainly have
a reduce/reduce conflict)
A rhs may be followed by an optional %prec directive, followed by a
token, giving the rule an explicit precedence (see yacc manuals for
its precise meaning) and optional semantic action code block (see
below).
exp: '-' exp %prec NEG { -$_[1] }
| exp '+' exp { $_[1] + $_[3] }
| NUM
;
Note that in Parse::Yapp, a lhs cannot appear more than once as a
rule name (This differs from yacc).
"The footer section"
may contain any valid Perl code and will be appended at the very
end of your parser module. Here you can write your lexer, error
report subs and anything relevant to you parser.
"Semantic actions"
Semantic actions are run every time a reduction occurs in the
parsing flow and they must return a semantic value.
They are (usually, but see below "In rule actions") written at the
very end of the rhs, enclosed with "{ }", and are copied verbatim
to your parser file, inside of the rules table.
Be aware that matching braces in Perl is much more difficult than
in C: inside strings they don't need to match. While in C it is
very easy to detect the beginning of a string construct, or a
single character, it is much more difficult in Perl, as there are
so many ways of writing such literals. So there is no check for
that today. If you need a brace in a double-quoted string, just
quote it ("\{" or "\}"). For single-quoted strings, you will need
to make a comment matching it in th right order. Sorry for the
inconvenience.
{
"{ My string block }".
"\{ My other string block \}".
qq/ My unmatched brace \} /.
# Force the match: {
q/ for my closing brace } /
q/ My opening brace { /
# must be closed: }
}
All of these constructs should work.
In Parse::Yapp, semantic actions are called like normal Perl sub
calls, with their arguments passed in @_, and their semantic value
are their return values.
$_[1] to $_[n] are the parameters just as $1 to $n in yacc, while
$_[0] is the parser object itself.
Having $_[0] beeing the parser object itself allows you to call
parser methods. Thats how the yacc macros are implemented:
yyerrok is done by calling $_[0]->YYErrok
YYERROR is done by calling $_[0]->YYError
YYACCEPT is done by calling $_[0]->YYAccept
YYABORT is done by calling $_[0]->YYAbort
All those methods explicitly return undef, for convenience.
YYRECOVERING is done by calling $_[0]->YYRecovering
Four useful methods in error recovery sub
$_[0]->YYCurtok
$_[0]->YYCurval
$_[0]->YYExpect
$_[0]->YYLexer
return respectivly the current input token that made the parse
fail, its semantic value (both can be used to modify their values
too, but know what you are doing ! See Error reporting routine
section for an example), a list which contains the tokens the
parser expected when the failure occured and a reference to the
lexer routine.
Note that if "$_[0]->YYCurtok" is declared as a %nonassoc token, it
can be included in "$_[0]->YYExpect" list whenever the input try to
use it in an associative way. This is not a bug: the token IS
expected to report an error if encountered.
To detect such a thing in your error reporting sub, the following
example should do the trick:
grep { $_[0]->YYCurtok eq $_ } $_[0]->YYExpect
and do {
#Non-associative token used in an associative expression
};
Accessing semantics values on the left of your reducing rule is
done through the method
$_[0]->YYSemval( index )
where index is an integer. Its value being 1 .. n returns the same
values than $_[1] .. $_[n], but -n .. 0 returns values on the left
of the rule beeing reduced (It is related to $-n .. $0 .. $n in
yacc, but you cannot use $_[0] or $_[-n] constructs in Parse::Yapp
for obvious reasons)
There is also a provision for a user data area in the parser
object, accessed by the method:
$_[0]->YYData
which returns a reference to an anonymous hash, which let you have
all of your parsing data held inside the object (see the Calc.yp or
ParseYapp.yp files in the distribution for some examples). That's
how you can make you parser module reentrant: all of your module
states and variables are held inside the parser object.
Note: unfortunatly, method calls in Perl have a lot of overhead,
and when YYData is used, it may be called a huge number
of times. If your are not a *real* purist and efficiency
is your concern, you may access directly the user-space
in the object: $parser->{USER} wich is a reference to an
anonymous hash array, and then benchmark.
If no action is specified for a rule, the equivalant of a default
action is run, which returns the first parameter:
{ $_[1] }
"In rule actions"
It is also possible to embed semantic actions inside of a rule:
typedef: TYPE { $type = $_[1] } identlist { ... } ;
When the Parse::Yapp's parser encounter such an embedded action, it
modifies the grammar as if you wrote (although @x-1 is not a legal
lhs value):
@x-1: /* empty */ { $type = $_[1] };
typedef: TYPE @x-1 identlist { ... } ;
where x is a sequential number incremented for each "in rule"
action, and -1 represents the "dot position" in the rule where the
action arises.
In such actions, you can use $_[1]..$_[n] variables, which are the
semantic values on the left of your action.
Be aware that the way Parse::Yapp modifies your grammar because of
in rule actions can produce, in some cases, spurious conflicts that
wouldn't happen otherwise.
"Generating the Parser Module"
Now that you grammar file is written, you can use yapp on it to
generate your parser module:
yapp -v Calc.yp
will create two files Calc.pm, your parser module, and Calc.output
a verbose output of your parser rules, conflicts, warnings, states
and summary.
What your are missing now is a lexer routine.
"The Lexer sub"
is called each time the parser need to read the next token.
It is called with only one argument that is the parser object
itself, so you can access its methods, specially the
$_[0]->YYData
data area.
It is its duty to return the next token and value to the parser.
They "must" be returned as a list of two variables, the first one
is the token known by the parser (symbolic or literal), the second
one beeing anything you want (usually the content of the token, or
the literal value) from a simple scalar value to any complex
reference, as the parsing driver never use it but to call semantic
actions:
( 'NUMBER', $num )
or
( '>=', '>=' )
or
( 'ARRAY', [ @values ] )
When the lexer reach the end of input, it must return the '' empty
token with an undef value:
( '', undef )
Note that your lexer should never return 'error' as token value:
for the driver, this is the error token used for error recovery and
would lead to odd reactions.
Now that you have your lexer written, maybe you will need to output
meaningful error messages, instead of the default which is to print
'Parse error.' on STDERR.
So you will need an Error reporting sub.
"Error reporting routine"
If you want one, write it knowing that it is passed as parameter
the parser object. So you can share information whith the lexer
routine quite easily.
You can also use the "$_[0]->YYErrok" method in it, which will
resume parsing as if no error occured. Of course, since the invalid
token is still invalid, you're supposed to fix the problem by
yourself.
The method "$_[0]->YYLexer" may help you, as it returns a reference
to the lexer routine, and can be called as
($tok,$val)=&{$_[0]->Lexer}
to get the next token and semantic value from the input stream. To
make them current for the parser, use:
($_[0]->YYCurtok, $_[0]->YYCurval) = ($tok, $val)
and know what you're doing...
"Parsing"
Now you've got everything to do the parsing.
First, use the parser module:
use Calc;
Then create the parser object:
$parser=new Calc;
Now, call the YYParse method, telling it where to find the lexer
and error report subs:
$result=$parser->YYParse(yylex => \&Lexer,
yyerror => \&ErrorReport);
(assuming Lexer and ErrorReport subs have been written in your
current package)
The order in which parameters appear is unimportant.
Et voila.
The YYParse method will do the parse, then return the last semantic
value returned, or undef if error recovery cannot recover.
If you need to be sure the parse has been successful (in case your
last returned semantic value is undef) make a call to:
$parser->YYNberr()
which returns the total number of time the error reporting sub has
been called.
"Error Recovery"
in Parse::Yapp is implemented the same way it is in yacc.
"Debugging Parser"
To debug your parser, you can call the YYParse method with a debug
parameter:
$parser->YYParse( ... , yydebug => value, ... )
where value is a bitfield, each bit representing a specific debug
output:
Bit Value Outputs
0x01 Token reading (useful for Lexer debugging)
0x02 States information
0x04 Driver actions (shifts, reduces, accept...)
0x08 Parse Stack dump
0x10 Error Recovery tracing
To have a full debugging ouput, use
debug => 0x1F
Debugging output is sent to STDERR, and be aware that it can
produce "huge" outputs.
"Standalone Parsers"
By default, the parser modules generated will need the Parse::Yapp
module installed on the system to run. They use the
Parse::Yapp::Driver which can be safely shared between parsers in
the same script.
In the case you'd prefer to have a standalone module generated, use
the "-s" switch with yapp: this will automagically copy the driver
code into your module so you can use/distribute it without the need
of the Parse::Yapp module, making it really a "Standalone Parser".
If you do so, please remember to include Parse::Yapp's copyright
notice in your main module copyright, so others can know about
Parse::Yapp module.
"Source file line numbers"
by default will be included in the generated parser module, which
will help to find the guilty line in your source file in case of a
syntax error. You can disable this feature by compiling your
grammar with yapp using the "-n" switch.
BUGS AND SUGGESTIONS
If you find bugs, think of anything that could improve Parse::Yapp or
have any questions related to it, feel free to contact the author.
AUTHOR
Francois Desarmenien <francois@fdesar.net>
SEE ALSOyapp(1)perl(1)yacc(1)bison(1).
COPYRIGHT
The Parse::Yapp module and its related modules and shell scripts are
copyright (c) 1998-2001 Francois Desarmenien, France. All rights
reserved.
You may use and distribute them under the terms of either the GNU
General Public License or the Artistic License, as specified in the
Perl README file.
If you use the "standalone parser" option so people don't need to
install Parse::Yapp on their systems in order to run you software, this
copyright noticed should be included in your software copyright too,
and the copyright notice in the embedded driver should be left
untouched.
perl v5.16.0 2012-08-15 Parse::Yapp(3)
