RE_FORMAT(7) OpenBSD Reference Manual RE_FORMAT(7)NAME
re_format - POSIX regular expressions
DESCRIPTION
Regular expressions (REs), as defined in IEEE Std 1003.1-2004
(``POSIX''), come in two forms: basic regular expressions (BREs) and
extended regular expressions (EREs). Both forms of regular expressions
are supported by the interfaces described in regex(3). Applications
dealing with regular expressions may use one or the other form (or indeed
both). For example, ed(1) uses BREs, whilst egrep(1) talks EREs.
Consult the manual page for the specific application to find out which it
uses.
POSIX leaves some aspects of RE syntax and semantics open; `**' marks
decisions on these aspects that may not be fully portable to other POSIX
implementations.
This manual page first describes regular expressions in general,
specifically extended regular expressions, and then discusses differences
between them and basic regular expressions.
EXTENDED REGULAR EXPRESSIONS
An ERE is one** or more non-empty** branches, separated by `|'. It
matches anything that matches one of the branches.
A branch is one** or more pieces, concatenated. It matches a match for
the first, followed by a match for the second, etc.
A piece is an atom possibly followed by a single** `*', `+', `?', or
bound. An atom followed by `*' matches a sequence of 0 or more matches
of the atom. An atom followed by `+' matches a sequence of 1 or more
matches of the atom. An atom followed by `?' matches a sequence of 0 or
1 matches of the atom.
A bound is `{' followed by an unsigned decimal integer, possibly followed
by `,' possibly followed by another unsigned decimal integer, always
followed by `}'. The integers must lie between 0 and RE_DUP_MAX (255**)
inclusive, and if there are two of them, the first may not exceed the
second. An atom followed by a bound containing one integer i and no
comma matches a sequence of exactly i matches of the atom. An atom
followed by a bound containing one integer i and a comma matches a
sequence of i or more matches of the atom. An atom followed by a bound
containing two integers i and j matches a sequence of i through j
(inclusive) matches of the atom.
An atom is a regular expression enclosed in `()' (matching a part of the
regular expression), an empty set of `()' (matching the null string)**, a
bracket expression (see below), `.' (matching any single character), `^'
(matching the null string at the beginning of a line), `$' (matching the
null string at the end of a line), a `\' followed by one of the
characters `^.[$()|*+?{\' (matching that character taken as an ordinary
character), a `\' followed by any other character** (matching that
character taken as an ordinary character, as if the `\' had not been
present**), or a single character with no other significance (matching
that character). A `{' followed by a character other than a digit is an
ordinary character, not the beginning of a bound**. It is illegal to end
an RE with `\'.
A bracket expression is a list of characters enclosed in `[]'. It
normally matches any single character from the list (but see below). If
the list begins with `^', it matches any single character not from the
rest of the list (but see below). If two characters in the list are
separated by `-', this is shorthand for the full range of characters
between those two (inclusive) in the collating sequence, e.g. `[0-9]' in
ASCII matches any decimal digit. It is illegal** for two ranges to share
an endpoint, e.g. `a-c-e'. Ranges are very collating-sequence-dependent,
and portable programs should avoid relying on them.
To include a literal `]' in the list, make it the first character
(following a possible `^'). To include a literal `-', make it the first
or last character, or the second endpoint of a range. To use a literal
`-' as the first endpoint of a range, enclose it in `[.' and `.]' to make
it a collating element (see below). With the exception of these and some
combinations using `[' (see next paragraphs), all other special
characters, including `\', lose their special significance within a
bracket expression.
Within a bracket expression, a collating element (a character, a multi-
character sequence that collates as if it were a single character, or a
collating-sequence name for either) enclosed in `[.' and `.]' stands for
the sequence of characters of that collating element. The sequence is a
single element of the bracket expression's list. A bracket expression
containing a multi-character collating element can thus match more than
one character, e.g. if the collating sequence includes a `ch' collating
element, then the RE `[[.ch.]]*c' matches the first five characters of
`chchcc'.
Within a bracket expression, a collating element enclosed in `[=' and
`=]' is an equivalence class, standing for the sequences of characters of
all collating elements equivalent to that one, including itself. (If
there are no other equivalent collating elements, the treatment is as if
the enclosing delimiters were `[.' and `.]'.) For example, if `x' and `y'
are the members of an equivalence class, then `[[=x=]]', `[[=y=]]', and
`[xy]' are all synonymous. An equivalence class may not** be an endpoint
of a range.
Within a bracket expression, the name of a character class enclosed in
`[:' and `:]' stands for the list of all characters belonging to that
class. Standard character class names are:
alnum digit punct
alpha graph space
blank lower upper
cntrl print xdigit
These stand for the character classes defined in ctype(3). A locale may
provide others. A character class may not be used as an endpoint of a
range.
There are two special cases** of bracket expressions: the bracket
expressions `[[:<:]]' and `[[:>:]]' match the null string at the
beginning and end of a word, respectively. A word is defined as a
sequence of characters starting and ending with a word character which is
neither preceded nor followed by word characters. A word character is an
alnum character (as defined by ctype(3)) or an underscore. This is an
extension, compatible with but not specified by POSIX, and should be used
with caution in software intended to be portable to other systems.
In the event that an RE could match more than one substring of a given
string, the RE matches the one starting earliest in the string. If the
RE could match more than one substring starting at that point, it matches
the longest. Subexpressions also match the longest possible substrings,
subject to the constraint that the whole match be as long as possible,
with subexpressions starting earlier in the RE taking priority over ones
starting later. Note that higher-level subexpressions thus take priority
over their lower-level component subexpressions.
Match lengths are measured in characters, not collating elements. A null
string is considered longer than no match at all. For example, `bb*'
matches the three middle characters of `abbbc';
`(wee|week)(knights|nights)' matches all ten characters of `weeknights';
when `(.*).*' is matched against `abc', the parenthesized subexpression
matches all three characters; and when `(a*)*' is matched against `bc',
both the whole RE and the parenthesized subexpression match the null
string.
If case-independent matching is specified, the effect is much as if all
case distinctions had vanished from the alphabet. When an alphabetic
that exists in multiple cases appears as an ordinary character outside a
bracket expression, it is effectively transformed into a bracket
expression containing both cases, e.g. `x' becomes `[xX]'. When it
appears inside a bracket expression, all case counterparts of it are
added to the bracket expression, so that, for example, `[x]' becomes
`[xX]' and `[^x]' becomes `[^xX]'.
No particular limit is imposed on the length of REs**. Programs intended
to be portable should not employ REs longer than 256 bytes, as an
implementation can refuse to accept such REs and remain POSIX-compliant.
The following is a list of extended regular expressions:
c Any character c not listed below matches itself.
\c Any backslash-escaped character c matches itself.
. Matches any single character that is not a newline (`\n').
[char-class]
Matches any single character in char-class. To include a `]' in
char-class, it must be the first character. A range of
characters may be specified by separating the end characters of
the range with a `-'; e.g. a-z specifies the lower case
characters. The following literal expressions can also be used
in char-class to specify sets of characters:
[:alnum:] [:cntrl:] [:lower:] [:space:]
[:alpha:] [:digit:] [:print:] [:upper:]
[:blank:] [:graph:] [:punct:] [:xdigit:]
If `-' appears as the first or last character of char-class, then
it matches itself. All other characters in char-class match
themselves.
Patterns in char-class of the form [. col-elm .] or [= col-elm
=], where col-elm is a collating element, are interpreted
according to setlocale(3) (not currently supported).
[^char-class]
Matches any single character, other than newline, not in
char-class. char-class is defined as above.
^ If `^' is the first character of a regular expression, then it
anchors the regular expression to the beginning of a line.
Otherwise, it matches itself.
$ If `$' is the last character of a regular expression, it anchors
the regular expression to the end of a line. Otherwise, it
matches itself.
[[:<:]]
Anchors the single character regular expression or subexpression
immediately following it to the beginning of a word.
[[:>:]]
Anchors the single character regular expression or subexpression
immediately following it to the end of a word.
(re) Defines a subexpression re. Any set of characters enclosed in
parentheses matches whatever the set of characters without
parentheses matches (that is a long-winded way of saying the
constructs `(re)' and `re' match identically).
* Matches the single character regular expression or subexpression
immediately preceding it zero or more times. If `*' is the first
character of a regular expression or subexpression, then it
matches itself. The `*' operator sometimes yields unexpected
results. For example, the regular expression b* matches the
beginning of the string "abbb" (as opposed to the substring
"bbb"), since a null match is the only leftmost match.
+ Matches the singular character regular expression or
subexpression immediately preceding it one or more times.
? Matches the singular character regular expression or
subexpression immediately preceding it 0 or 1 times.
{n,m} {n,} {n}
Matches the single character regular expression or subexpression
immediately preceding it at least n and at most m times. If m is
omitted, then it matches at least n times. If the comma is also
omitted, then it matches exactly n times.
| Used to separate patterns. For example, the pattern `cat|dog'
matches either `cat' or `dog'.
BASIC REGULAR EXPRESSIONS
Basic regular expressions differ in several respects:
o `|', `+', and `?' are ordinary characters and there is no
equivalent for their functionality.
o The delimiters for bounds are `\{' and `\}', with `{' and `}' by
themselves ordinary characters.
o The parentheses for nested subexpressions are `\(' and `\)', with
`(' and `)' by themselves ordinary characters.
o `^' is an ordinary character except at the beginning of the RE
or** the beginning of a parenthesized subexpression.
o `$' is an ordinary character except at the end of the RE or** the
end of a parenthesized subexpression.
o `*' is an ordinary character if it appears at the beginning of the
RE or the beginning of a parenthesized subexpression (after a
possible leading `^').
o Finally, there is one new type of atom, a back-reference: `\'
followed by a non-zero decimal digit d matches the same sequence
of characters matched by the dth parenthesized subexpression
(numbering subexpressions by the positions of their opening
parentheses, left to right), so that, for example, `\([bc]\)\1'
matches `bb' or `cc' but not `bc'.
The following is a list of basic regular expressions:
c Any character c not listed below matches itself.
\c Any backslash-escaped character c, except for `{', `}', `(', and
`)', matches itself.
. Matches any single character that is not a newline (`\n').
[char-class]
Matches any single character in char-class. To include a `]' in
char-class, it must be the first character. A range of
characters may be specified by separating the end characters of
the range with a `-'; e.g. a-z specifies the lower case
characters. The following literal expressions can also be used
in char-class to specify sets of characters:
[:alnum:] [:cntrl:] [:lower:] [:space:]
[:alpha:] [:digit:] [:print:] [:upper:]
[:blank:] [:graph:] [:punct:] [:xdigit:]
If `-' appears as the first or last character of char-class, then
it matches itself. All other characters in char-class match
themselves.
Patterns in char-class of the form [. col-elm .] or [= col-elm
=], where col-elm is a collating element, are interpreted
according to setlocale(3) (not currently supported).
[^char-class]
Matches any single character, other than newline, not in
char-class. char-class is defined as above.
^ If `^' is the first character of a regular expression, then it
anchors the regular expression to the beginning of a line.
Otherwise, it matches itself.
$ If `$' is the last character of a regular expression, it anchors
the regular expression to the end of a line. Otherwise, it
matches itself.
[[:<:]]
Anchors the single character regular expression or subexpression
immediately following it to the beginning of a word.
[[:>:]]
Anchors the single character regular expression or subexpression
immediately following it to the end of a word.
\(re\) Defines a subexpression re. Subexpressions may be nested. A
subsequent backreference of the form \n, where n is a number in
the range [1,9], expands to the text matched by the nth
subexpression. For example, the regular expression \(.*\)\1
matches any string consisting of identical adjacent substrings.
Subexpressions are ordered relative to their left delimiter.
* Matches the single character regular expression or subexpression
immediately preceding it zero or more times. If `*' is the first
character of a regular expression or subexpression, then it
matches itself. The `*' operator sometimes yields unexpected
results. For example, the regular expression b* matches the
beginning of the string "abbb" (as opposed to the substring
"bbb"), since a null match is the only leftmost match.
\{n,m\} \{n,\} \{n\}
Matches the single character regular expression or subexpression
immediately preceding it at least n and at most m times. If m is
omitted, then it matches at least n times. If the comma is also
omitted, then it matches exactly n times.
SEE ALSOctype(3), regex(3)STANDARDS
IEEE Std 1003.1-2004 (``POSIX''): Base Definitions, Chapter 9 (Regular
Expressions).
BUGS
Having two kinds of REs is a botch.
The current POSIX spec says that `)' is an ordinary character in the
absence of an unmatched `('; this was an unintentional result of a
wording error, and change is likely. Avoid relying on it.
Back-references are a dreadful botch, posing major problems for efficient
implementations. They are also somewhat vaguely defined (does
`a\(\(b\)*\2\)*d' match `abbbd'?). Avoid using them.
POSIX's specification of case-independent matching is vague. The ``one
case implies all cases'' definition given above is the current consensus
among implementors as to the right interpretation.
The syntax for word boundaries is incredibly ugly.
OpenBSD 4.9 July 15, 2010 OpenBSD 4.9