SI(4) OpenBSD Programmer's Manual (SPARC) SI(4)NAME
si - NCR 5380 Sun SCSI 3 VME SCSI controller
SYNOPSIS
si0 at vmes0 addr 0xff200000 level 3 vect 0x40 (sun4)
#si0 at vmes0 addr 0xff200000 level 3 vect 0x40 flags 0x07 (sun4)
scsibus* at si?
DESCRIPTION
The si is a VME SCSI controller based on the NCR 5380 chip, found in sun3
and sun4 systems with the VME bus.
DEVICE FLAGS
0x01 Use DMA (may be polled)
0x02 Use DMA completion interrupts
0x04 Allow disconnect/reconnect
The si device flags may be OR'd together to enable any combination of the
features listed above. If no flags are specified, the device will use
DMA by default.
SEE ALSOcd(4), ch(4), esp(4), intro(4), scsi(4), sd(4), st(4), sw(4), uk(4)HISTORY
The si driver first appeared in NetBSD.
OpenBSD 4.9 July 3, 2010 OpenBSD 4.9