dskdump(1) Emulators dskdump(1)NAMEdskdump - Sector-level copy from one floppy or image file to another
SYNOPSISdskdump [-itype TYPE] [-otype TYPE] [-iside SIDE] [-oside SIDE] [-icomp
COMP] [-ocomp COMP] [-idstep] [-odstep] [-retry COUNT] [-format FMT]
[-first CYLINDER] [-last CYLINDER] INPUT-IMAGE OUTPUT-IMAGE
DESCRIPTION
Dskdump copies floppy discs or images, optionally converting image
types. Unlike dsktrans(1), dskdump can handle discs with different
numbers or sizes of sector on different tracks.
OPTIONS-itype TYPE
Determines which driver is to be used to read from the source
disc.
auto Select according to the disc image file. This is the
default.
dsk Use the DSK (CPCEmu format) image driver.
edsk Use the extended version of the DSK format.
floppy Use the floppy driver.
myz80 Use the hard disk (MYZ80 format) image driver. (This
format cannot be autodetected.)
cfi Use the CFI (DOS fdcopy format) image driver. (This
format cannot be autodetected.)
apridisk
Use the ApriDisk image driver (from the utility of the
same name). (This format cannot be autodetected.)
raw Use the raw driver.
-otype TYPE
Determines which driver is to be used to write to the destina‐
tion disc. The drivers are as for -itype.
-icomp COMP
Select the compression method used on the source disc image file
(has no effect when reading a floppy disc).
auto Detect from the first few bytes of the file. This is the
default.
sq Huffman coded (SQ / USQ).
gz Gzipped (gzip / gunzip).
bz2 Burrows-Wheeler compressed (bzip2 / bunzip2).
-ocomp COMP
Select the compression to be used on output. Compression methods
are as for -icomp, except that bz2 cannot be used.
-iside SIDE
Determines which side (0 or 1) of the source disc is to be read
from.
-oside SIDE
Determines which side (0 or 1) of the destination disc is to be
written to.
-idstep
Double-step the source drive (used to read 360k discs in 1.2Mb
drives). Only supported by the Linux floppy driver.
-odstep
Double-step the destination drive (used to write 360k discs in
1.2Mb drives). Only supported by the Linux floppy driver.
-retry COUNT
Set the number of times to attempt a read/write/format in case
of error.
-format FMT
Do not autodetect the disc format; use the named format.
dskdump does not make extensive use of the disc format; it is
chiefly used to provide a guess at the number of tracks to dump.
-first CYL
Start copying at the specified cylinder. Cylinders prior to this
will not be formatted or written.
-last CYL
Copy up to and including the specified cylinder.
-odstep
Double-step the destination drive (used to write 360k discs in
1.2Mb drives). Only supported by the Linux floppy driver.
SEE ALSOdsktrans(1)AUTHOR
John Elliott <jce@seasip.demon.co.uk>.
Version 1.2.1 23 January 2008 dskdump(1)