FINTEK(4) OpenBSD Programmer's Manual FINTEK(4)NAMEfintek - Fintek F75375 temperature sensor
SYNOPSIS
fintek* at iic? flags 0x0000
DESCRIPTION
The fintek driver provides support for the Fintek F75375 temperature
sensor and fan controller. The sensor possesses a collection of sensor
values which are made available through the sysctl(8) interface:
$ sysctl hw.sensors.fintek0
hw.sensors.fintek0.temp0=31.00 degC
hw.sensors.fintek0.temp1=29.00 degC
hw.sensors.fintek0.fan0=0 RPM
hw.sensors.fintek0.fan1=0 RPM
hw.sensors.fintek0.volt0=1.72 V DC (VCC)
hw.sensors.fintek0.volt1=1.34 V DC
hw.sensors.fintek0.volt2=1.73 V DC
hw.sensors.fintek0.volt3=0.90 V DC
On some machines the fans will not function properly with the chip in
default mode. Setting flags to 0x0001 will make the fans run at full
speed to prevent overheating.
SEE ALSOiic(4), intro(4), sensorsd(8), sysctl(8)AUTHORS
The fintek driver was written by Dale Rahn <drahn@openbsd.org>.
OpenBSD 4.9 May 31, 2007 OpenBSD 4.9