flow-tools-examples(1)flow-tools-examples(1)NAMEflow-tools-examples — Example usage of flow-tools.
EXAMPLE - Configuring Cisco IOS Router
NetFlow is configured on each input interface, then global commands are
used to specify the export destination. To ensure a consistant source
address address Loopback0 is configured as the export source.
ip cef distributed
ip flow-export version 5 origin-as
ip flow-export destination 10.0.0.100 5004
ip flow-export source Loopback0
interface Loopback0
ip address 10.1.1.1 255.255.255.255
interface FastEthernet0/1/0
ip address 10.0.0.1 255.255.255.0
no ip directed-broadcast
ip route-cache flow
ip route-cache distributed
Many other options exist such as aggregated NetFlow and sampled NetFlow
which are detailed at (link to URL http://www.cisco.com) .
EXAMPLE - Configuring Cisco CatIOS Switch
Some Cisco Catalyst switches support a different implementation of Net‐
Flow that is performed on the supervisor. With the cache based for‐
warding model which is implemented in the Catalyst 55xx with Route
Switch Module (RSM) and NetFlow Feature Card (NFFC), the RSM processes
the first flow and the remaining packets in the flow are forwarded by
the Supervisor. This is also implemented in the early versions of the
65xx with MSFC. The deterministic forwarding model used in the 65xx
with MSFC2 do not use NetFlow to determine the forwarding path, the
flow cache is only used for statistics as in the current IOS implemen‐
tations. In all of of the above configurations flow exports arrive
from both the RSM/MSFC and the Supervisor engines as distinct streams.
In the worst cast the RSM exports in version 5 and the Supervisor
exports in version 7. Fortunately flow-capture and flow-receive can
sort all this out by processing flows from both sources and converting
them to a common export format.
The router side running IOS is configured identically to the example
given above. The CatIOS NetFlow Data Export configuration follows:
set mls flow full
set mls nde version 7
set mls nde 10.0.0.1 9800
set mls nde enable
When the 65xx is running in Native mode, from a users perspective the
switch is only running IOS.
More detailed examples can be found on Cisco's web site
(link to URL http://www.cisco.com) .
EXAMPLE - Configuring Juniper Router
Juniper supports flow exports by the routing engine sampling packet
headers and aggregating them into flows. Packet sampling is done by
defining a firewall filter to accept and sample all traffic, applying
that rule to the interface, then configuring the sampling forwarding
option.
interfaces {
ge-0/3/0 {
unit 0 {
family inet {
filter {
input all;
output all;
}
address 10.0.0.1/24;
}
}
}
firewall {
filter all {
term all {
then {
sample;
accept;
}
}
}
}
forwarding-options {
sampling {
input {
family inet {
rate 100;
}
}
output {
cflowd 10.0.0.100 {
port 9800;
version 5;
}
}
}
}
Other options exist such as aggregated flows which are detailed at
(link to URL http://www.juniper.net) .
EXAMPLE - Network topology and flow.acl
The network topology and flow.acl will be used for many of the examples
that follow. Flows are collected and stored in /flows/R.
ISP-A ISP-B
+ +
+ +
IP=10.1.2.1/24 + + IP=10.1.1.1/24
ifIndex=2 + + ifIndex=1
interface=serial1/1 + + interface=serial0/0
-----
| R | Campus Router
-----
+ +
IP=10.1.4.1/24 + + IP=10.1.3.1/24
ifIndex=4 + + ifIndex=3
interface=Ethernet1/1 + + interface=Ethernet0/0
+ +
Sales Marketing
ip access-list standard sales permit 10.1.4.0 0.0.0.255
ip access-list standard not_sales deny 10.1.4.0 0.0.0.255
ip access-list standard marketing permit 10.1.3.0 0.0.0.255
ip access-list standard not_marketing deny 10.1.3.0 0.0.0.255
ip access-list standard campus permit 10.1.4.0 0.0.0.255
ip access-list standard campus permit 10.1.3.0 0.0.0.255
ip access-list standard not_campus deny 10.1.4.0 0.0.0.255
ip access-list standard not_campus deny 10.1.3.0 0.0.0.255
ip access-list standard evil_hacket permit host 10.6.6.6
ip access-list standard spoofer permit host 10.9.9.9
ip access-list standard multicast 224.0.0.0 15.255.255.255
EXAMPLE - Finding spoofed addresses
A common problem on the Internet is the use of "spoofed" (addresses
that are not assigned to an organization) for use in DoS attacks or
compromising servers that rely on the source IP address for authentica‐
tion.
Display all flow records that originate from the campus and are sent to
the Internet but are not using legal addresses.
flow-cat /flows/R | flow-filter -Snot_campus -I1,2 | flow-print
Summary of the destinations of the internally spoofed addresses sorted
by octets.
flow-cat /flows/R | flow-filter -Snot_campus -I1,2 | flow-stat -f8 -S2
Summary of the sources of the internally spoofed addresses sorted by
flows.
flow-cat /flows/R | flow-filter -Snot_campus -I1,2 | flow-stat -f9 -S1
Summary of the internally spoofed sources and destination pairs sorted
by packets.
flow-cat /flows/R | flow-filter -Snot_campus -I1,2 | flow-stat -f10 -S4
Display all flow records that originate external to the campus that
have campus addresses. Many times these can be attackers trying to
exploit host based authentication mechanisms like unix r* commands.
Another common source is mobile clients which send packets with their
campus addresses before obtaining a valid IP.
flow-cat /flows/R | flow-filter -Scampus -i1,2 | flow-print
Summary of the destinations of the externally spoofed addresses sorted
by octets.
flow-cat /flows/R | flow-filter -Scampus -i1,2 | flow-stat -f8 -S2
EXAMPLE - Locate hosts using or running services
Find all SMTP servers active during the collection period that have
established connections to the Internet. Summarize sorted by octets.
flow-cat /flows/R | flow-filter -I1,2 -P25 | flow-stat -f9 -S2
Find all outbound NNTP connections to the Internet. Summarize with
source and destination IP sorted by octets.
flow-cat /flows/R | flow-filter -I1,2 -P119 | flow-stat -f10 -S3
Find all inbound NNTP connections to the Internet. Summarize with
source and destination IP sorted by octets.
flow-cat /flows/R | flow-filter -i1,2 -P119 | flow-stat -f10 -S3
EXAMPLE - Multicast usage
Summarize Multicast S,G where sources are on campus.
flow-cat /flows/R | flow-filter -Dmulticast -I1,2 | flow-stat -f10 -S3
Summarize Multicast S,G where sources are off campus.
flow-cat /flows/R | flow-filter -Dmulticast -i1,2 | flow-stat -f10 -S3
EXAMPLE - Find scanners
Find SMTP scanners with flow-dscan. This will also find SMTP clients
which try to contact many servers. This behavior is characterized by a
recent Microsoft worm.
touch dscan.suppress.src dscan.suppress.dst
flow-cat /flows/R | flow-filter -P25 | flow-dscan -b
AUTHOR
Mark Fullmer maf@splintered.net
SEE ALSOflow-tools(1)flow-tools-examples(1)
