fruled(1)fruled(1)NAMEfruled - flash/turn off attention LEDs (cell, cabinet and I/O chassis
attention LEDs)
SYNOPSIS
cell cell]...
username
I/Ochassis I/Ochassis]...
username
cabinet cabinet]...
username
cabinet] cabinet]...
username
DESCRIPTION
The command flashes/turns off attention LEDs of cells or I/O chassis in
the local complex. The command can also be used to start flashing or
stop flashing cabinet number LEDs. If either the option or the option
is specified, the scope of the command will be the specified target
complex.
If a cell or I/O chassis attention LED is made to flash, the cabinet
number LED of the cabinet that contains the cell/ I/O chassis can also
be made to flash by using the option. Likewise, if a cell or I/O chas‐
sis's LED is being turned off, the cabinet number LED can also be made
to stop flashing using the option.
Note: This command does not read or display the state of any LED.
Users must observe the hardware itself to determine the state.
Refer to the for a description of the partition management terms used
in this man page.
Options and Arguments
recognizes the following command line options and arguments:
Start or stop flashing the cabinet number LED of the cabinet that con‐
tains the cell or I/O chassis. The option is only available with the
and options.
Start flashing or stop flashing the cabinet number LED of the specified
cabinet.
Turn off all cell attention LEDs.
Flash/Turn off the specified
cell attention LED.
A cell can be specified either in the local (cabinet#/slot#) or
global (cell#) format. For example, the cell located in cabinet
0, slot 4 is locally identified as 0/4 or globally as simply 4.
Turn off specified attention LED(s). This is the default.
Allows access to the complex specified by the
option. The accessed complex is then considered the target com‐
plex. Access is through the service processor's LAN port.
The option is required if this option is used.
If this option is specified, the command prompts for the pass‐
word.
If an error is reported when you attempt to connect using this
option, check to see that IPMI LAN access has not been disabled
on the remote service processor. Access to the complex through
IPMI over LAN can be enabled or disabled by logging on to the
service processor and using the command from the Command Menu.
The and options are mutually exclusive.
This option should only be used in combination with either the
option. IPaddress|hostname specifies the IP address or hostname
of the target partition or complex
Turn off all I/O chassis LEDs.
Flash/Turn off the specified
I/Ochassis attention LED.
An I/Ochassis must be specified in the form of cabinet#/enclo‐
sure#/chassis#. For example, the I/O chassis located in cabinet
0, enclosure 1 and I/O chassis slot 1 is identified as 0/1/1.
Limit the scope of the
or option to a given cabinet.
Start flashing specified attention LED(s).
The option is unavailable with or The and options are mutually
exclusive.
Specifies the required authorization to access a partition other than
the local partition (but can also be used as a loopback access
to the local partition). The complex to be modified is the one
in which this target partition resides.
The option is required if this option is used.
If this option is specified, the command prompts for the pass‐
word.
username specifies a configured user name on the target parti‐
tion.
Note: This command is a Web-Based Enterprise Management (WBEM)
Client Application. The option accesses the target partition
using a Secure Sockets Layer (SSL) connection. If errors are
reported, check that the conditions described in the section are
satisfied.
Mapping of Global Cell Numbers to Local Cell Numbers
The cabinets in a complex are numbered starting from 0. The cell slots
in each cabinet are also numbered starting from 0. Each cabinet can
have a maximum of 8 cells. For example, the cells located in cabinet 0
will have the following cell numbers in global format: 0, 1, 2, 3, 4,
5, 6, 7. The cell numbers in corresponding local format will be 0/0,
0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7.
Similarly the cells located in cabinet 1 will have the following cell
numbers in global format: 8, 9, 10, 11, 12, 13, 14, 15. The cell num‐
bers in corresponding local format will be 1/0, 1/1, 1/2, 1/3, 1/4,
1/5, 1/6, 1/7.
From the above convention the cell located in cabinet 1, slot 0 is
identified in the local format as 1/0 or in the global format as 8.
The command will display the above cell as "cab1,cell0". The cell
located in cabinet 1, slot 4 is identified in the local format as 1/4
or in the global format as 12. The command will display the above cell
as "cab1,cell4". See parstatus(1).
RETURN VALUE
The command exits with one of the following values:
Successful completion.
Error condition occurred.
No LED associated with specified object.
EXAMPLES
Flash the attention LED of the cell located in cabinet 0 slot 4 and
also flash the attention LED of the cabinet in which it is contained.
Turn off the attention LEDs of 2 cells located in cabinet 0, slot 4 and
cabinet 0, slot 6.
DEPENDENCIES
This command uses the Web-Based Enterprise Management (WBEM) product
and some of its configuration settings. If you encounter connection
errors when using the option, check that the following two conditions
are satisfied:
· Use the command (see cimconfig(1M) in the WBEM product documenta‐
tion) to verify (and correct if necessary) the setting of the fol‐
lowing two variables:
·
·
· The target partition's digital certificate has been appended to the
local partition's Shared Authentication Store. For the nPartition
commands, the Shared Authentication Store is stored in the file:
This file is used by all the clients, which use SSL based certifi‐
cates. If these clients trust a target partition, then the nParti‐
tion commands will also trust the target partition.
Refer to the WBEM documents specified in the section below for further
information.
AUTHOR
was developed by the Hewlett-Packard Company.
SEE ALSOparstatus(1), cplxmodify(1M), frupower(1M), parconfig(1M), parcre‐
ate(1M), parmgr(1M), parmodify(1M), parremove(1M), parunlock(1M), par‐
tition(5).
on
on
on
fruled(1)