img-raw(n)img-raw(n)______________________________________________________________________________NAMEimg-raw - Img, Raw Data Format (raw)
SYNOPSIS
package require Tk
package require img::raw ?1.4?
image create photo ?name? ?options?
_________________________________________________________________DESCRIPTION
The package img::raw is a sub-package of Img. It can be loaded as a
part of the complete Img support, via package require Img, or on its
own, via package require img::raw.
Like all packages of Img it does not provide new commands, but extends
the existing Tk command image so that it supports files containing
raster images in the Raw Data Format (raw). More specifically img::raw
extends Tk's photo image type.
The name of the new format handler is raw. This handler provides new
additional configuration options. See section RAW OPTIONS for more
detailed explanations.
All of the above means that in a call like
image create photo ?name? ?options?
[1] Image data in raw format (options -data and -file) is detected
automatically.
[2] The format name raw is recognized by the option -format. In
addition the value for the option is treated as list and may
contain any of the special options listed in section RAW
OPTIONS.
NOTE
This format handler must be loaded explicitly with package require
img::raw.
SUPPORTED RAW TYPES
Grayscale image: 1 channel of 32-bit floating point values.
1 channel of 16-bit unsigned integer values.
1 channel of 8-bit unsigned integer values.
True-color image: 3 channels of 32-bit floating point values.
3 channels of 16-bit unsigned integer values.
3 channels of 8-bit unsigned integer values.
List of currently supported features:
Type | Read | Write |
| -file | -data | -file | -data |
----------------------------------------
Gray | Yes | Yes | Yes | Yes |
RGB | Yes | Yes | Yes | Yes |
There are 2 supported file formats:
One with the pure raw data only, the other with a 7 line ASCII header
of the following form:
Magic=RAW\n File format identifier. Fixed value.
Width=128\n Image width in pixels.
Height=128\n Image height in pixels.
NumChan=1\n Possible values: 1 or 3.
ByteOrder=Intel\n Possible values: "Intel" or "Motorola".
ScanOrder=TopDown\n Possible values: "TopDown" or "BottomUp".
PixelType=byte\n Possible values: "float", "short" or "byte".
RAW OPTIONS
The handler provides the following options:
-verbose bool
This option is supported for reading and writing.
If set to true, additional information about the loaded/stored
image is printed to stdout. Default is false.
-useheader bool
This option is supported for reading and writing.
If set to true, use the file header information for reading and
writing. Default is true.
-nchan int
This option is supported for reading and writing image data
without header.
Specify the number of channels of the input image. Default is
1.
-width int
This option is supported for reading image data without header
only.
Specify the width of the input image. Default is 128.
-height int
This option is supported for reading image data without header
only.
Specify the height of the input image. Default is 128.
-byteorder string
This option is supported for reading image data without header
only.
Specify the byteorder of the input image data. Possible values:
Intel or Motorola. Default is assuming the same byteorder as
that of the host computer.
-uuencode bool
This option is supported for reading image data without header
only.
If set to false, do not assume, that the image data stored in a
Tcl variable is uuencoded. Default is true, i.e. the image data
in a Tcl variable is assumed to be uuencoded.
-scanorder string
This option is supported for reading and writing image data
without header.
Specify the scanline order of the input image. Possible values:
TopDown or BottomUp. Default is assuming the same byteorder as
that of the host computer.
-pixeltype string
This option is supported for reading image data without header
only.
Specify the type of the pixel values. Possible values: float or
short or byte. Default is byte.
RAW files are always written in byte pixel format.
-gamma float
This option is supported for reading only.
Specify a gamma correction to be applied when mapping the input
data to 8-bit image values. Default is 1.0.
-nomap bool
This option is supported for reading only.
If set to true, no mapping of input values is done. Use this
option, if your image already contains RGB values in the range
of 0 .. 255. Default is false.
-min float
This option is supported for reading only.
Specify the minimum pixel value to be used for mapping the input
data to 8-bit image values. Default is the minimum value found
in the image data.
-max float
This option is supported for reading only.
Specify the maximum pixel value to be used for mapping the input
data to 8-bit image values. Default is the maximum value found
in the image data.
SEE ALSO
img-bmp, img-dted, img-gif, img-ico, img-intro, img-jpeg, img-pcx, img-
pixmap, img-png, img-ppm, img-ps, img-raw, img-sgi, img-sun, img-tga,
img-tiff, img-window, img-xbm, img-xpm
KEYWORDS
image handling, raw, tk
COPYRIGHT
Copyright (c) 1995-2009 Jan Nijtmans <nijtmans@users.sourceforge.net>
Img 1.4 img-raw(n)