lircd_selinux(8) SELinux Policy lircd lircd_selinux(8)NAMElircd_selinux - Security Enhanced Linux Policy for the lircd processes
DESCRIPTION
Security-Enhanced Linux secures the lircd processes via flexible manda‐
tory access control.
The lircd processes execute with the lircd_t SELinux type. You can
check if you have these processes running by executing the ps command
with the -Z qualifier.
For example:
ps -eZ | grep lircd_t
ENTRYPOINTS
The lircd_t SELinux type can be entered via the lircd_exec_t file type.
The default entrypoint paths for the lircd_t domain are the following:
/usr/sbin/lircd
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
lircd policy is very flexible allowing users to setup their lircd pro‐
cesses in as secure a method as possible.
The following process types are defined for lircd:
lircd_t
Note: semanage permissive -a lircd_t can be used to make the process
type lircd_t permissive. SELinux does not deny access to permissive
process types, but the AVC (SELinux denials) messages are still gener‐
ated.
BOOLEANS
SELinux policy is customizable based on least access required. lircd
policy is extremely flexible and has several booleans that allow you to
manipulate the policy and run lircd with the tightest access possible.
If you want to allow all daemons to write corefiles to /, you must turn
on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the
daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on
the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to use nscd shared memory,
you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
PORT TYPES
SELinux defines port types to represent TCP and UDP ports.
You can see the types associated with a port by using the following
command:
semanage port -l
Policy governs the access confined processes have to these ports.
SELinux lircd policy is very flexible allowing users to setup their
lircd processes in as secure a method as possible.
The following port types are defined for lircd:
lirc_port_t
Default Defined Ports:
tcp 8765
MANAGED FILES
The SELinux process type lircd_t can manage files labeled with the fol‐
lowing file types. The paths listed are the default paths for these
file types. Note the processes UID still need to have DAC permissions.
cluster_conf_t
/etc/cluster(/.*)?
cluster_var_lib_t
/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?
cluster_var_run_t
/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk
lircd_var_run_t
/var/run/lirc(/.*)?
/var/run/lircd(/.*)?
/dev/lircd
/var/run/lircd.pid
root_t
/
/initrd
var_lock_t
/run/lock(/.*)?
/var/lock
/var/lock
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file
type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files.
SELinux lircd policy is very flexible allowing users to setup their
lircd processes in as secure a method as possible.
EQUIVALENCE DIRECTORIES
lircd policy stores data with multiple different file context types
under the /var/run/lirc directory. If you would like to store the data
in a different directory you can use the semanage command to create an
equivalence mapping. If you wanted to store this data under the /srv
dirctory you would execute the following command:
semanage fcontext -a -e /var/run/lirc /srv/lirc
restorecon -R -v /srv/lirc
STANDARD FILE CONTEXT
SELinux defines the file context types for the lircd, if you wanted to
store files with these types in a diffent paths, you need to execute
the semanage command to sepecify alternate labeling and then use
restorecon to put the labels on disk.
semanage fcontext -a -t lircd_etc_t '/srv/lircd/content(/.*)?'
restorecon -R -v /srv/mylircd_content
Note: SELinux often uses regular expressions to specify labels that
match multiple files.
The following file types are defined for lircd:
lircd_etc_t
- Set files with the lircd_etc_t type, if you want to store lircd files
in the /etc directories.
Paths:
/etc/lirc(/.*)?, /etc/lircd.conf
lircd_exec_t
- Set files with the lircd_exec_t type, if you want to transition an
executable to the lircd_t domain.
lircd_initrc_exec_t
- Set files with the lircd_initrc_exec_t type, if you want to transi‐
tion an executable to the lircd_initrc_t domain.
lircd_var_run_t
- Set files with the lircd_var_run_t type, if you want to store the
lircd files under the /run or /var/run directory.
Paths:
/var/run/lirc(/.*)?, /var/run/lircd(/.*)?, /dev/lircd,
/var/run/lircd.pid
Note: File context can be temporarily modified with the chcon command.
If you want to permanently change the file context you need to use the
semanage fcontext command. This will modify the SELinux labeling data‐
base. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage port can also be used to manipulate the port definitions
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), lircd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8)
, setsebool(8)lircd 13-11-20 lircd_selinux(8)
