mailconfig(8)mailconfig(8)NAMEmailconfig - Sets up the routing and delivery of mail for the system.
SYNOPSIS
/usr/sbin/mailconfig [-ui cli [clioptions] | gui [x resources]]
OPTIONS
Specifies the user interface to be invoked
The mailconfig program can be run using either the graphical
user interface (gui) or the command-line interface (cli): Speci‐
fies the graphical user interface.
Sample command line: mailconfig-ui gui
[x resources]: The mailconfig-ui gui command accepts all of
the standard X Toolkit command-line options, which are docu‐
mented in the OPTIONS section of the X(1X) reference page.
Specifies the command-line interface.
Sample command line: mailconfig-ui cli
[clioptions]: The mailconfig-ui cli command accepts the fol‐
lowing command-line options: Provides a brief help message,
listing all configurable mailconfig components and the actions
that can be performed on them.
Sample command line: mailconfig-ui cli -Help Provides a
detailed help message on how to configure the specified compo‐
nent.
Sample command line: mailconfig-ui cli -host Help
In the help message, the actions and attribute values that are
pertinent to the specified component are listed.
The following is a list of all possible actions for all config‐
urable components: Creates a new configuration for the specified
component. Modifies the specified component's existing configu‐
ration. Adds a new attribute value to the specified component's
existing configuration. Removes the specified component's
existing configuration. Deletes an attribute value from the
specified component's existing configuration. Lists all
attribute values in the specified component. Lists (on stdout)
all attributes that the specified component can use. A subset
of these attributes is listed on the create action line of the
help provided when you issue the mailconfig-ui cli -<component>
Help command. Lists any attributes used to define the unique‐
ness of the specified component. Performs a specific action
(for example, modify) on the specified component, optionally
altering one or more of the component's attributes.
Sample command line: mailconfig-ui cli -host modify alias=frew
DESCRIPTION
The Mail Configuration application, mailconfig, is used by the system
administrator to set up the routing and delivery of mail for the sys‐
tem. The protocols that can be used are: DECnet, DECnet/OSI, MTS, UUCP,
Internet, X.25, POP, and IMAP. The configuration of POP and IMAP ser‐
vices under mailconfig is transparent to the system administrator.
Dependencies: Before using Mail Configuration, be sure to configure
the system using the following applications, which you can access from
the SysMan Configuration Checklist: Network Configuration BIND Configu‐
ration NFS Configuration UUCP or other network protocols that you use
to send mail NTP NIS
The mailconfig application can be invoked from:
The CDE Application Manager
Application Group: System_Admin
Desktop_Apps Subgroup: Configuration
Configuration Subgroup: Mail
To start mailconfig from the command line, enter /usr/sbin/mailconfig.
Online help is available for the mailconfig application. To get help,
click on any Help button or use the Help pull-down menu.
NOTES
The -focus option is not valid because mail is configured throughout a
TruCluster Server cluster; hence, all nodes in the cluster have the
same mail configuration.
For a cluster to handle any mail protocol, other than the Internet pro‐
tocol, all nodes must have that protocol installed, configured, and
operating in the same fashion.
RESTRICTIONS
You must have the appropriate privileges to use this application.
EXAMPLES
Opens Mail Configuration in the graphical user interface. mailconfig-ui gui Opens Mail Configuration in the command-line interface. mail‐
config -ui cli Provides a brief help message for the command-line
interface of Mail Configuration, listing all configurable mailconfig
components and the actions that can be performed on them. mailconfig-ui cli -Help Provides a detailed help message on how to configure
host, the specified component. mailconfig-ui cli -host Help Opens
Mail Configuration in the command-line interface while changing the
host alias to frew. mailconfig-ui cli -host modify alias=frew The
/usr/dt/appconfig/help/C/MailConfig.sdl command opens the Mail Configu‐
ration help volume from the command line without running the applica‐
tion. /usr/dt/bin/dthelpview -h
FILES
Mail Configuration help volume Specify the environment variables that
define part of the mail configuration on the system Current sendmail
configuration settings Previous sendmail configuration settings Origi‐
nal sendmail configuration settings Current mail configuration in
stanza file format
SEE ALSO
Commands: mailsetup(8), rc.config(8)
Files: aliases(4), sendmail.cf(4), stanza(4)
Network: mail_intro(7), mail_manual_setup(7)mailconfig(8)