MATH(3) OpenBSD Programmer's Manual MATH(3)NAMEmath - introduction to mathematical library functions
DESCRIPTION
These functions constitute the C math library, libm. The link editor
searches this library under the ``-lm'' option. Declarations for these
functions may be obtained from the include file <math.h>.
LIST OF FUNCTIONS
Name Description ULPs
acos(3) inverse trigonometric function 3
acosh(3) inverse hyperbolic function 3
asin(3) inverse trigonometric function 3
asinh(3) inverse hyperbolic function 3
atan(3) inverse trigonometric function 1
atan2(3) inverse trigonometric function 2
atanh(3) inverse hyperbolic function 3
cabs(3) complex absolute value 1
cbrt(3) cube root 1
ceil(3) integer no less than 0
copysign(3) copy sign bit 0
cos(3) trigonometric function 1
cosh(3) hyperbolic function 3
erf(3) error function 1
erfc(3) complementary error function 1
exp(3) exponential 1
expm1(3)exp(x)-1 1
fabs(3) absolute value 0
floor(3) integer no greater than 0
fmod(3) remainder 0
fpclassify(3) classify real floating type 0
hypot(3) Euclidean distance 1
ilogb(3) exponent extraction 0
isfinite(3) test for finite value 0
isinf(3) check for infinity 0
isnan(3) check for not-a-number 0
isnormal(3) test for normal value 0
j0(3) Bessel function ???
j1(3) Bessel function ???
jn(3) Bessel function ???
lgamma(3) log gamma function 1
log(3) natural logarithm 1
log10(3) logarithm to base 10 3
log1p(3) log(1+x) 1
nan(3) generate NaN 0
nextafter(3) next representable number 0
pow(3) exponential x**y 60-500
remainder(3) remainder 0
remquo(3) remainder 0
rint(3) round to nearest integer 0
round(3) round to nearest integer 0
scalbn(3) exponent adjustment 0
signbit(3) test sign 0
sin(3) trigonometric function 1
sinh(3) hyperbolic function 3
sqrt(3) square root 1
tan(3) trigonometric function 3
tanh(3) hyperbolic function 3
tgamma(3) gamma function 4
trunc(3) nearest integral value 3
y0(3) Bessel function ???
y1(3) Bessel function ???
yn(3) Bessel function ???
NOTES
In 4.3BSD, distributed from the University of California in late 1985,
most of the foregoing functions come in two versions, one for the double-
precision ``D'' format in the DEC VAX-11 family of computers, another for
double-precision arithmetic conforming to IEEE Std 754-1985. The two
versions behave very similarly, as should be expected from programs more
accurate and robust than was the norm when UNIX was born. For instance,
the programs are accurate to within the number of ulps tabulated above; a
ulp is one Unit in the Last Place. The functions have been cured of
anomalies that afflicted the older math library in which incidents like
the following had been reported:
sqrt(-1.0) = 0.0 and log(-1.0) = -1.7e38.
cos(1.0e-11) > cos(0.0) > 1.0.
pow(x,1.0) != x when x = 2.0, 3.0, 4.0, ..., 9.0.
pow(-1.0,1.0e10) trapped on Integer Overflow.
sqrt(1.0e30) and sqrt(1.0e-30) were very slow.
However, the two versions do differ in ways that have to be explained, to
which end the following notes are provided.
DEC VAX-11 D_floating-point:
This is the format for which the original math library was developed, and
to which this manual is still principally dedicated. It is the double-
precision format for the PDP-11 and the earlier VAX-11 machines; VAX-11s
after 1983 were provided with an optional ``G'' format closer to the IEEE
double-precision format. The earlier DEC MicroVAXs have no D format,
only G double-precision. (Why? Why not?)
Properties of D_floating-point:
Wordsize: 64 bits, 8 bytes.
Radix: Binary.
Precision: 56 significant bits, roughly 17 significant decimal
digits. If x and x' are consecutive positive
D_floating-point numbers (they differ by 1 ulp), then
1.3e-17 < 0.5**56 < (x'-x)/x <= 0.5**55 < 2.8e-17.
Range: Overflow threshold = 2.0**127 = 1.7e38.
Underflow threshold = 0.5**128 = 2.9e-39.
NOTE: THIS RANGE IS COMPARATIVELY NARROW.
Overflow customarily stops computation.
Underflow is customarily flushed quietly to zero.
CAUTION:
It is possible to have x != y and yet x-y = 0
because of underflow. Similarly x > y > 0 cannot
prevent either x*y = 0 or y/x = 0 from happening
without warning.
Zero is represented ambiguously.
Although 2**55 different representations of zero are
accepted by the hardware, only the obvious
representation is ever produced. There is no -0 on a
VAX.
infinity is not part of the VAX architecture.
Reserved operands:
Of the 2**55 that the hardware recognizes, only one of
them is ever produced. Any floating-point operation
upon a reserved operand, even a MOVF or MOVD,
customarily stops computation, so they are not much
used.
Exceptions:
Divisions by zero and operations that overflow are
invalid operations that customarily stop computation
or, in earlier machines, produce reserved operands that
will stop computation.
Rounding: Every rational operation (+, -, *, /) on a VAX (but not
necessarily on a PDP-11), if not an over/underflow nor
division by zero, is rounded to within half a ulp, and
when the rounding error is exactly half a ulp then
rounding is away from 0.
Except for its narrow range, D_floating-point is one of the better
computer arithmetics designed in the 1960's. Its properties are
reflected fairly faithfully in the elementary functions for a VAX
distributed in 4.3BSD. They over/underflow only if their results have to
lie out of range or very nearly so, and then they behave much as any
rational arithmetic operation that over/underflowed would behave.
Similarly, expressions like log(0) and atanh(1) behave like 1/0; and
sqrt(-3) and acos(3) behave like 0/0; they all produce reserved operands
and/or stop computation! The situation is described in more detail in
manual pages.
This response seems excessively punitive, so it is destined to be
replaced at some time in the foreseeable future by a more flexible
but still uniform scheme being developed to handle all floating-
point arithmetic exceptions neatly. See infnan(3) for the present
state of affairs.
How do the functions in 4.3BSD-'s new libm for UNIX compare with their
counterparts in DEC's VAX/VMS library? Some of the VMS functions are a
little faster, some are a little more accurate, some are more puritanical
about exceptions (like pow(0.0,0.0) and atan2(0.0,0.0)), and most occupy
much more memory than their counterparts in libm. The VMS
implementations interpolate in large table to achieve speed and accuracy;
the libm implementations use tricky formulas compact enough that all of
them may some day fit into a ROM.
More importantly, DEC considers the VMS implementation proprietary and
guards it zealously against unauthorized use. In contrast, the libm
included in 4.3BSD is freely distributable; it may be copied freely
provided their provenance is always acknowledged. Therefore, no user of
UNIX on a machine whose arithmetic resembles VAX D_floating-point need
use anything worse than the new libm.
IEEE STANDARD 754 Floating-Point Arithmetic:
This is the most widely adopted standard for computer arithmetic. VLSI
chips that conform to some version of that standard have been produced by
a host of manufacturers, among them:
Intel i8087, i80287 National Semiconductor 32081
Motorola 68881 Weitek WTL-1032, ... , -1165
Zilog Z8070 Western Electric (AT&T) WE32106
Other implementations range from software, done thoroughly for the Apple
Macintosh, through VLSI in the Hewlett-Packard 9000 series, to the ELXSI
6400 running ECL at 3 Megaflops. Several other companies have adopted
the formats of IEEE Std 754-1985 without, alas, adhering to the
standard's method of handling rounding and exceptions such as
over/underflow. The DEC VAX G_floating-point format is very similar to
IEEE Std 754-1985 Double format. It is so similar that the C programs
for the IEEE versions of most of the elementary functions listed above
could easily be converted to run on a MicroVAX, though nobody has
volunteered to do that yet.
The code in 4.3BSD-'s libm for machines that conform to IEEE Std 754-1985
is intended primarily for the National Semi. 32081 and WTL 1164/65. To
use this code with the Intel or Zilog chips, or with the Apple Macintosh
or ELXSI 6400, is to forego the use of better code provided (perhaps for
free) by those companies and designed by some of the authors of the code
above. Except for atan(), cabs(), cbrt(), erf(), erfc(), hypot(),
j0-jn(), lgamma(), pow() and y0() - yn(), the Motorola 68881 has all the
functions in libm on chip, and is faster and more accurate to boot; it,
Apple, the i8087, Z8070 and WE32106 all use 64 significant bits. The
main virtue of 4.3BSD-'s libm is that it is freely distributable; it may
be copied freely provided its provenance is always acknowledged.
Therefore no user of UNIX on a machine that conforms to IEEE Std 754-1985
need use anything worse than the new libm.
Properties of IEEE Std 754-1985 Double-Precision:
Wordsize: 64 bits, 8 bytes.
Radix: Binary.
Precision: 53 significant bits, roughly equivalent to 16
significant decimals.
If x and x' are consecutive positive Double-Precision
numbers (they differ by 1 ulp, then
1.1e-16 < 0.5**53 < (x'-x)/x <= 0.5**52 < 2.3e-16.
Range: Overflow threshold = 2.0**1024 = 1.8e308
Underflow threshold = 0.5**1022 = 2.2e-308
Overflow goes by default to a signed infinity.
Underflow is Gradual, rounding to the nearest integer
multiple of 0.5**1074 = 4.9e-324.
Zero is represented ambiguously as +0 or -0.
Its sign transforms correctly through multiplication or
division, and is preserved by addition of zeros with
like signs; but x-x yields +0 for every finite x. The
only operations that reveal zero's sign are division by
zero and copysign(x,+-0). In particular, comparison (x
> y, x >= y, etc.) cannot be affected by the sign of
zero; but if finite x = y then infinity = 1/(x-y) !=
-1/(y-x) = -infinity.
infinity is signed.
It persists when added to itself or to any finite
number. Its sign transforms correctly through
multiplication and division, and (finite)/+-infinity =
+-0 (nonzero)/0 = +-infinity. But infinity-infinity,
infinity*0 and infinity/infinity are, like 0/0 and
sqrt(-3), invalid operations that produce NaN.
Reserved operands:
There are 2**53-2 of them, all called NaN (Not a
Number). Some, called Signaling NaNs, trap any
floating-point operation performed upon them; they are
used to mark missing or uninitialized values, or
nonexistent elements of arrays. The rest are Quiet
NaNs; they are the default results of Invalid
Operations, and propagate through subsequent arithmetic
operations. If x != x then x is NaN; every other
predicate (x > y, x = y, x < y, ...) is FALSE if NaN is
involved.
NOTE: Trichotomy is violated by NaN. Besides being
FALSE, predicates that entail ordered
comparison, rather than mere (in)equality,
signal Invalid Operation when NaN is involved.
Rounding: Every algebraic operation (+, -, *, /, sqrt) is rounded
by default to within half a ulp, and when the rounding
error is exactly half a ulp then the rounded value's
least significant bit is zero. This kind of rounding
is usually the best kind, sometimes provably so. For
instance, for every x = 1.0, 2.0, 3.0, 4.0, ...,
2.0**52, we find (x/3.0)*3.0 == x and (x/10.0)*10.0 ==
x and ... despite that both the quotients and the
products have been rounded. Only rounding like IEEE
Std 754-1985 can do that. But no single kind of
rounding can be proved best for every circumstance, so
IEEE Std 754-1985 provides rounding towards zero or
towards +infinity or towards -infinity at the
programmer's discretion. The same kinds of rounding
are specified for Binary-Decimal Conversions, at least
for magnitudes between roughly 1.0e-10 and 1.0e37.
Exceptions:
IEEE Std 754-1985 recognizes five kinds of floating-
point exceptions, listed below in declining order of
probable importance.
Exception Default Result
Invalid Operation NaN, or FALSE
Overflow +-infinity
Divide by Zero +-infinity
Underflow Gradual Underflow
Inexact Rounded value
NOTE: An Exception is not an Error unless handled
badly. What makes a class of exceptions exceptional is
that no single default response can be satisfactory in
every instance. On the other hand, if a default
response will serve most instances satisfactorily, the
unsatisfactory instances cannot justify aborting
computation every time the exception occurs.
For each kind of floating-point exception, IEEE Std 754-1985 provides a
flag that is raised each time its exception is signaled, and stays raised
until the program resets it. Programs may also test, save and restore a
flag. Thus, IEEE Std 754-1985 provides three ways by which programs may
cope with exceptions for which the default result might be
unsatisfactory:
1) Test for a condition that might cause an exception later, and branch
to avoid the exception.
2) Test a flag to see whether an exception has occurred since the
program last reset its flag.
3) Test a result to see whether it is a value that only an exception
could have produced.
CAUTION: The only reliable ways to discover whether Underflow has
occurred are to test whether products or quotients lie closer to
zero than the underflow threshold, or to test the Underflow flag.
(Sums and differences cannot underflow in IEEE Std 754-1985; if x !=
y then x-y is correct to full precision and certainly nonzero
regardless of how tiny it may be.) Products and quotients that
underflow gradually can lose accuracy gradually without vanishing,
so comparing them with zero (as one might on a VAX) will not reveal
the loss. Fortunately, if a gradually underflowed value is destined
to be added to something bigger than the underflow threshold, as is
almost always the case, digits lost to gradual underflow will not be
missed because they would have been rounded off anyway. So gradual
underflows are usually provably ignorable. The same cannot be said
of underflows flushed to 0.
At the option of an implementor conforming to IEEE Std 754-1985, other
ways to cope with exceptions may be provided:
4) ABORT. This mechanism classifies an exception in advance as an
incident to be handled by means traditionally associated with error-
handling statements like "ON ERROR GO TO ...". Different languages
offer different forms of this statement, but most share the
following characteristics:
- No means is provided to substitute a value for the offending
operation's result and resume computation from what may be the
middle of an expression. An exceptional result is abandoned.
- In a subprogram that lacks an error-handling statement, an
exception causes the subprogram to abort within whatever program
called it, and so on back up the chain of calling subprograms
until an error-handling statement is encountered or the whole
task is aborted and memory is dumped.
5) STOP. This mechanism, requiring an interactive debugging
environment, is more for the programmer than the program. It
classifies an exception in advance as a symptom of a programmer's
error; the exception suspends execution as near as it can to the
offending operation so that the programmer can look around to see
how it happened. Often times the first several exceptions turn out
to be quite unexceptionable, so the programmer ought ideally to be
able to resume execution after each one as if execution had not been
stopped.
6) ... Other ways lie beyond the scope of this document.
The crucial problem for exception handling is the problem of Scope, and
the problem's solution is understood, but not enough manpower was
available to implement it fully in time to be distributed in 4.3BSD-'s
libm. Ideally, each elementary function should act as if it were
indivisible, or atomic, in the sense that ...
i) No exception should be signaled that is not deserved by the
data supplied to that function.
ii) Any exception signaled should be identified with that
function rather than with one of its subroutines.
iii) The internal behavior of an atomic function should not be
disrupted when a calling program changes from one to another
of the five or so ways of handling exceptions listed above,
although the definition of the function may be correlated
intentionally with exception handling.
Ideally, every programmer should be able to conveniently turn a debugged
subprogram into one that appears atomic to its users. But simulating all
three characteristics of an atomic function is still a tedious affair,
entailing hosts of tests and saves-restores; work is under way to
ameliorate the inconvenience.
Meanwhile, the functions in libm are only approximately atomic. They
signal no inappropriate exception except possibly:
Over/Underflow
when a result, if properly computed, might have lain barely
within range, and
Inexact in cabs, cbrt, hypot, log10 and pow
when it happens to be exact, thanks to fortuitous
cancellation of errors.
Otherwise:
Invalid Operation is signaled only when
any result but NaN would probably be misleading.
Overflow is signaled only when
the exact result would be finite but beyond the overflow
threshold.
Divide-by-Zero is signaled only when
a function takes exactly infinite values at finite
operands.
Underflow is signaled only when
the exact result would be nonzero but tinier than the
underflow threshold.
Inexact is signaled only when
greater range or precision would be needed to represent the
exact result.
Properties of IEEE Std 754-1985 Single-Precision:
Wordsize: 32 bits, 4 bytes.
Radix: Binary.
Precision: 24 significant bits, roughly equivalent to 7
significant decimals.
If x and x' are consecutive positive Double-Precision
numbers (they differ by 1 ulp, then
6.0e-8 < 0.5**24 < (x'-x)/x <= 0.5**23 < 1.2e-7.
Range: Overflow threshold = 2.0**128 = 3.4e38.
Underflow threshold = 0.5**126 = 1.2e-38
Overflow goes by default to a signed infinity.
Underflow is Gradual, rounding to the nearest integer
multiple of 0.5**149 = 1.4e-45.
Zero is represented ambiguously as +0 or -0.
Its sign transforms correctly through multiplication or
division, and is preserved by addition of zeros with
like signs; but x-x yields +0 for every finite x. The
only operations that reveal zero's sign are division by
zero and copysign(x,+-0). In particular, comparison (x
> y, x >= y, etc.) cannot be affected by the sign of
zero; but if finite x = y then infinity = 1/(x-y) !=
-1/(y-x) = -infinity.
infinity is signed.
It persists when added to itself or to any finite
number. Its sign transforms correctly through
multiplication and division, and (finite)/+-infinity =
+-0 (nonzero)/0 = +-infinity. But infinity-infinity,
infinity*0 and infinity/infinity are, like 0/0 and
sqrt(-3), invalid operations that produce NaN.
Reserved operands:
There are 2**24-2 of them, all called NaN (Not a
Number). Some, called Signaling NaNs, trap any
floating-point operation performed upon them; they are
used to mark missing or uninitialized values, or
nonexistent elements of arrays. The rest are Quiet
NaNs; they are the default results of Invalid
Operations, and propagate through subsequent arithmetic
operations. If x != x then x is NaN; every other
predicate (x > y, x = y, x < y, ...) is FALSE if NaN is
involved.
NOTE: Trichotomy is violated by NaN. Besides being
FALSE, predicates that entail ordered
comparison, rather than mere (in)equality,
signal Invalid Operation when NaN is involved.
Rounding: Every algebraic operation (+, -, *, /, sqrt) is rounded
by default to within half a ulp, and when the rounding
error is exactly half a ulp then the rounded value's
least significant bit is zero. This kind of rounding
is usually the best kind, sometimes provably so. For
instance, for every x = 1.0, 2.0, 3.0, 4.0, ...,
2.0**52, we find (x/3.0)*3.0 == x and (x/10.0)*10.0 ==
x and ... despite that both the quotients and the
products have been rounded. Only rounding like IEEE
Std 754-1985 can do that. But no single kind of
rounding can be proved best for every circumstance, so
IEEE Std 754-1985 provides rounding towards zero or
towards +infinity or towards -infinity at the
programmer's discretion. The same kinds of rounding
are specified for Binary-Decimal Conversions, at least
for magnitudes between roughly 1.0e-10 and 1.0e37.
Exceptions:
IEEE Std 754-1985 recognizes five kinds of floating-
point exceptions, listed below in declining order of
probable importance.
Exception Default Result
Invalid Operation NaN, or FALSE
Overflow +-infinity
Divide by Zero +-infinity
Underflow Gradual Underflow
Inexact Rounded value
NOTE: An Exception is not an Error unless handled
badly. What makes a class of exceptions exceptional is
that no single default response can be satisfactory in
every instance. On the other hand, if a default
response will serve most instances satisfactorily, the
unsatisfactory instances cannot justify aborting
computation every time the exception occurs.
SEE ALSO
An explanation of IEEE Std 754-1985 and its proposed extension p854 was
published in the IEEE magazine MICRO in August 1984 under the title "A
Proposed Radix- and Word-length-independent Standard for Floating-point
Arithmetic" by W. J. Cody et al. The manuals for Pascal, C and BASIC on
the Apple Macintosh document the features of IEEE Std 754-1985 pretty
well. Articles in the IEEE magazine COMPUTER vol. 14 no. 3 (Mar. 1981),
and in the ACM SIGNUM Newsletter Special Issue of Oct. 1979, may be
helpful although they pertain to superseded drafts of the standard.
BUGS
When signals are appropriate, they are emitted by certain operations
within libm, so a subroutine-trace may be needed to identify the function
with its signal in case method 5) above is in use. All the code in libm
takes the IEEE Std 754-1985 defaults for granted; this means that a
decision to trap all divisions by zero could disrupt a function that
would otherwise get a correct result despite division by zero.
OpenBSD 4.9 February 20, 2010 OpenBSD 4.9