oscam.conf(5)oscam.conf(5)NAMEoscam.conf - main configuration file for OSCam
SYNOPSIS
The main configuration file for OSCam contains global parameters such
as debugging, logging, monitor, protocols and anti-cascading. sections
in oscam.conf are nonrecurring. The [global] section is required. All
other sections are optional.
DESCRIPTIONS
The [global] section
nice = -20..+20
system priority, default:99
pidfile = filename
set PID file, default:none
logfile = [filename][;syslog][;stdout]
logging targets, default:/var/log/oscam.log. You can define a maxi‐
mum of one filename and additionally to log to stdout or syslog (you
can also only log to stdout or syslog and omit the filename).
ecmfmt = format
define ECM log format, default:c&p/i/s/l:h
possible variables:
c = CAID
d = PID
e = CSP hash
g = ID of origin gbox peer
h = checksum
i = Channel ID
j = distance of gbox hops
l = length
o = ONID
p = provider ID
s = service ID
w = CW
use a value as prefix to hide variable with this value, control
characters will be escaped by "\"
example: ecmfmt = c&0p/i/d/s/l:h.e_w
(hide provider ID if 0)
loghistorysize = bytes
size of log message history in web interface or monitor, 0 = dis‐
abled, default:4096
maxlogsize = kbytes
maximum log file size, 0 = unlimited, default:10
logduplicatelines = 0|1
1 = enable logging of duplicate lines in the log, default:0
disablelog = 0|1
1 = disable log file, default:0
cwlogdir = path
directory for CW logging, default:config dir
emmlogdir = path
directory for EMM logging, default:config dir
usrfile = filename
log file for user logging, default:none
log file format:
date
time
CWs per second
username
IP address of client
TCP/IP port
CWs found
CWs from cache
CWs not found
CWs ignored
CWs timed out
CWs tunneled
login time in unix/POSIX format
logout time in unix/POSIX format
protocol
disableuserfile = 0|1
1 = avoid logging although userfile is set, default:1 (also set
automatically if userfile is empty)
usrfileflag = 0|1
usrfile logging mode:
0 = only client logon/logoff will be logged in usrfile (default)
1 = each zapping of a client will be logged in usrfile
disablemail = 0|1
1 = disable saving NDS Videoguard mail messages from provider,
default:1
mailfile = file
define file saving NDS Videoguard mail messages from provider,
default:none
enableled = 0|1|2
0 = LED support disabled (default)
1 = LED support enabled for routers
2 = LED support enabled for Qbox HD
waitforcards = 0|1
1 = wait for local SCs on startup before opening network ports,
default:1
waitforcards_extra_delay = delay
additional delay in milli-seconds after waiting for local SCs on
startup before opening network ports, default:500
preferlocalcards = 0|1
SC decoding behavior:
0 = local SCs used like a remote reader
1 = prefer cache exchange based SCs (default)
2 = prefer local SCs
readerrestartseconds = seconds
seconds beetween restarts, 0 = disable reader restart, default:5
block_same_ip = 0|1
1 = reject looping ECMs from clients to readers with the same IP
address, default:1
block_same_name = 0|1
1 = reject looping ECMs from clients to readers with the same name,
default:1
clienttimeout = milli-seconds|seconds
value (clienttimeout in seconds < 100, else milli-seconds) for
client process to wait for key, default:5
clientmaxidle = seconds
value for client process being idle before disconnect, 0 = idle dis‐
connect disabled, default:120
suppresscmd08 = 0|1
0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for
rejected CAID, service ID and provider ID combination, 1 = disable,
can be overwritten per user in oscam.user, default:0
fallbacktimeout = milli-seconds
time falling back to fallback reader, default:2500
fallbacktimeout_percaid = milli-seconds
time falling back to CAID restricted fallback reader, default:2500
sleep = minutes
time waiting for inactive users, default:none, can be overwritten
per user in oscam.user
serverip = IP address
bind service to specified IP address, default:none
bindwait = seconds
value to wait for bind request to complete, default:120
netprio = priority
network priority, default:system given
resolvegethostbyname = 0|1
set mode for DNS resolving:
0 = getadressinfo (default)
1 = gethostbyname
failbancount = count
number of incorrect logins after an ip address will be blocked,
default:0
failbantime = minutes
time for IP based blocking for clients with an invalid login
attempt, 0 = failban is disabled, default:0
dropdups = 0|1
mode for duplicate client connections (requirement: uniq > 0):
0 = mark client as duplicate, but don't disconnect them (default)
1 = drop duplicate connections instead of marking as duplicate
unlockparental = 0|1
1 = unlock parental mode option to disable Seca and Viaccess pin
code request for adult movie, default:0
double_check = 0|1
1 = ECM will be send to two or more readers with the same SC and the
CWs will be verified against each other, lb_nbest_readers must be
set to 2 or higher, default:0
double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two
digits of CAID2]...
ECM will be send to two or more readers with the same SC and the CWs
will be verified against each other for defined CAID or first two
bytes of CAID, lb_nbest_readers must be set to 2 or higher,
default:none
lb_mode = mode
load balancing mode:
0 = load balance disabled, ECMs go to all readers (default)
1 = fastest reader first, after 5 ECMs the reader with the fastest
response time will be selected
2 = oldest reader first, reader with the longest no answer
3 = lowest usage level, the usage level will be calculated by the
sum of 5 ECMS response times, the higher a reader is busy, the
higher is usage level
lb_save = 0|counts
save auto load balance statistics:
0 = saving of auto load balance statistics disabled (default)
counts = save auto load balance statistics every counts ECMs
(minimum 100)
To save CPU power a minimum counts of 100 is recommended.
lb_nbest_readers = counts
set count of best readers for load balancing, default:1
lb_nfb_readers = counts
set count of fallback readers for load balancing, default:1
lb_nbest_percaid = CAID1:count1[,CAID2:count2]...
set count of best readers per CAIDs for load balancing, wildcard
CAIDs with two-digit CAIDs possible, default:none
example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1
(wildcard CAIDs 03xx and 04xx)
lb_min_ecmcount = counts
minimal ECM count to evaluate load balancing values, default:5
lb_max_ecmcount = counts
maximum ECM count before resetting load balancing values,
default:500
lb_reopen_seconds = seconds
time between retrying failed load balanced read‐
ers/CAIDs/providers/services, default:900
lb_retrylimit = milli-seconds
retry next load balanced reader only if response time is higher then
lb_retrylimit, default:0
lb_savepath = filename
filenanme for saving load balancing statistics,
default:/tmp/.oscam/stat
lb_stat_cleanup = hour
hours after the load balancing statistics will be deleted,
default:336
lb_retrylimits = CAID1:time1[,CAID2:time2]...
load balancing retry limit time per CAID, wildcard CAIDs with two-
digit CAIDs possible, default:none
example: lb_retrylimits = 12:0100,34:0200,5678:0300
(wildcard CAIDs 12xx and 34xx)
lb_noproviderforcaid = CAID1[,CAID2]...
ignore provider information for CAIDs to reduce load balancing
statistic data, wildcard CAIDs with two-digit CAIDs possible,
default:none
example: lb_noproviderforcaid = 0100,02,0300,04
(wildcard CAIDs 02xx and 04xx)
lb_max_readers = limit
restrict the reader count to limit during load balancing learning:
0 = unlimited (default)
limit = restrict load balancer readers to limit
lb_auto_timeout = 0|1
1 = enable automatic timeout based on load balancing statistics,
default:0
lb_auto_timeout_p = percent
percent added to average time as timeout time, default:30
lb_auto_timeout_t = milli seconds
minimal time added to average time as timeout time, default:300
lb_auto_betatunnel = 0|1
1 = enable automatic Betacrypt tunneling detection for CAIDs 1801,
1833, 1834, and 1835 for load balancing, Betacrypt defintion in
oscam.user with betatunnel will be prefered, default:1
lb_auto_betatunnel_mode = 0|1|2
set mode for automatic Betacrypt tunneling:
0 = CAID 18XX tunneling to CAID 17X2 only (default)
1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to
CAID 18XX (CAID 1833/1801)
2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to
CAID 18XX (CAID 1833/1834)
3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to
CAID 18XX (CAID 1833/1835)
4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only)
5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only)
6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)
lb_auto_betatunnel_prefer_beta = direction
set direction for automatic Betacrypt/Nagravision selection:
0 = disabled (default)
1 = always Betacrypt
105 = represents the middle
200 = always Nagravision
The [monitor] section
port = 0|port
UDP port for monitor, 0 = monitor disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
nocrypt = IP address|IP address range[,IP address|IP address range]...
unsecured monitor connection, default:none
example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = minutes
time no EMM occurs so that client is set to low, switch from status
"active" to "on", default:30
monlevel = 0|1|2|3|4
monitor level:
0 = no access to monitor
1 = only server and own procs
2 = all procs, but viewing only (default)
3 = all procs, reload of oscam.user possible
4 = complete access
monlevel can be overwritten per user in oscam.user
hideclient_to = seconds
time to hide clients in the monitor if not sending requests, 0 =
disabled, default:25
The [webif] section
httpport = [+]port
port for web interface, 0 = disabled, praefix + = enable SSL,
default:none, required
httpcert = file
file for http SSL certificate, default:oscam.pem
httpforcesslv3 = 0|1
1 = force using SSLv3, default:0
httpuser = username
username for password protection, default:none
httppwd = password
password for password protection, default:none
httpcss = path
path for external CSS file, default:none
http_prepend_embedded_css = 0|1
1 = embedded CSS will be added before external CSS , default:0
httptpl = path
path for external templates and picons, multiple simultaneously tem‐
plates and picons are possible by creating sub folders (maximum
length of 32 alphanumeric characters), sub folders naming is corre‐
sponding to sub folder in URL, default:none
example: httptpl = /this/is/my/path
folder with multiple templates:
/this/is/my/path/template1
/this/is/my/path/template2
valid URLs:
http://host:port/template1
http://host:port/template2
httpjscript = path
path for oscam.js javascript, default:none
httprefresh = seconds
status refresh in seconds, default:none
httphideidleclients = 0|1
1 = enables hiding clients after idle time set in parameter hide‐
client_to, default:0
httphidetype = character[character]...
characters defining columns to hide in web interface status page
(see type column), 'x' is a special character to match cacheex read‐
ers and proxies, default:none
httpscript = path
path to an executable script which you wish to start from web inter‐
face, default:none
httpallowed = IP address|IP address range[,IP address|IP address
range]...
http web interface connections allowed,
default:127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1
example: httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = hostname[,hostname][,hostname]
http web interface connections allowed, default:none
example: httpdyndns = host.example.com
httpdyndns = host1.example.com,host2.example.com
httpsavefullcfg = 0|1
write config:
0 = all not empty parameters, all not default parameters, all
parameters not containing the same value as the same
parameter in global configuration (default)
1 = all parameters
httpreadonly = 0|1
1 = read only modus for web interface, default:0
httpshowpicons = 0|1
1 = show picons in user list, default:0
httphelplang = en|de|fr|<available wiki languages>
set right language for wiki entry point, default:en
The [lcd] section
httposcamlabel = text
set individual label in web interface header, default:OSCam
enablelcd = 0|1
1 =enable LCD output, default:0
lcd_outputpath = path
path for LCD output, default:/tmp
lcd_hideidle = 0|1
1 = hide reader in LCD output if reader idle > 20 seconds, default:0
lcd_writeintervall = seconds
LCD refresh interval (minimum 5), default:10
The [cache] section
delay = milli-seconds
value to delay cached requests, default:0
max_time = seconds
maximum time CWs resist in cache, the time must be 2 seconds highter
than the parameter clienttimeout, default:15
max_hit_time = seconds
maximum time for cache exchange hits resist in cache for evaluating
wait_time, default:15
wait_time =
[caid][&mask][@provid][$servid][:awtime][:]dwtime[,[caid][&mask][@provid][$servid][:awtime][:]dwtime]...
wait time in milli-seconds for cache exchange and Cardservproxy
before sending ECMs to reader or proxy, default:none
example: wait_time =
0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200
cacheexenablestats = 0|1
1 = enable statistics for cache exchange mode, default:0
Please consider memory consumption.
cacheex_cw_check =
[caid][&mask][@provid][$servid]:mode:counter[,[caid][&mask][@provid][$servid]:mode:counter]...
mode = specify behaviour for counter:
0 = when wait_time expires, serve highest counter's CW
got anyway, even if no counter reached (default)
1 = never serve CW from cache exchange stored in cache,
if it's counter not reaches counter. When wait_time
expires, requests will go to normal readers
counter = set minimum CW counter to allow CW is used, default:1
csp_port = port
UDP port of Cardservproxy for cache exchange, default:none
csp_serverip = IP
bind Cardservproxy for cache exchange to specified IP address,
default:none
csp_ecm_filter =
[caid][&mask][@provid][$servid][,[caid][&mask][@provid][$servid]]...
Cardservproxy incoming ECM filter setting, default:none
csp_allow_request = 0|1
allow incoming ECM request from Cardservproxy, default:1
csp_allow_reforward = 0|1
1 = reforward other cacheex updates to Cardservproxy peers, option
could cause loops, default:0
cwcycle_check_enable = 0|1
1 = enable CW cycle check, default:0
cwcycle_check_caid = CAID[,CAID]...
CAID enabled for CW cycle check, default:none
cwcycle_maxlist = count
maximum CW cycle list entries, default:500, maximum:4000
cwcycle_keeptime = minutes
minimum time a learned cycle time resists in memory, default:15,
maximum:15
cwcycle_onbad = 0|1
0 = log bad CW cycle only, 1 = drop bad CW cycle, default:1
cwcycle_dropold = 0|1
1= drop old CW cycle, default:1
cwcycle_sensitive = 0|2|3|4
drop CW mode:
0 = disabled
2 = 2 (or more) same bytes and drop new CW
3 = 3 (or more) same bytes and drop new CW
4 = 4 (or more) same bytes and drop new CW (default)
cwcycle_allowbadfromffb = 0|1
1 = allow bad cycles from a fixed fallback reader, default:0
cwcycle_usecwcfromce = 0|1
1 = use CW info from cache exchange, default:0
wait_until_ctimeout = 0|1
answer when cache exchange timeout expires, if no normal readers are
available for sending ECMs:
0 = immediately send 'not found' to client (default)
1 = wait for cache exchange answer until client timeout expires
The [camd33] section
port = 0|port
TCP port for camd 3.3x clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
nocrypt = IP address|IP address range[,IP address|IP address range]...
unsecured camd 3.3x client connection, default:none
example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
passive = 0|1
1 = force passive camd 3.3x client, default:0
key = 128 bit key
key for camd 3.3x client encryption, default:none
example: key = 01020304050607080910111213141516
The [cs357x] section
port = 0|port
UDP port for camd 3.57x clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
suppresscmd08 = 0|1
0 = tell camd 3.5x / 3.57x clients not to request again for rejected
CAID, service ID and provider ID combination, 1 = disable, can be
overwritten per user in oscam.user, default:0
The [cs378x] section
port =
0|port[@CAID][:provid][,provid]...[;port@CAID[:provid][,provid]...]...
TCP port/CAID/provid definitions for camd 3.78x clients, 0 = dis‐
abled, default:0
examples: port = 10000@0100:100000;20000@0200:200000,300000,400000
port = 30000
serverip = IP address
bind service to specified IP address, default:all
keepalive = 0|1
0 = disable camd 3.78x keepalive modus, default:0
suppresscmd08 = 0|1
0 = tell camd 3.78x clients not to request again for rejected CAID,
service ID and provider ID combination, 1 = disable, can be over‐
written per user in oscam.user, default:0
The [newcamd] section
key = DES key
default key for newcamd client encryption, default:none
example: key = 0102030405060708091011121314
port = port[{DES key}]@CAID[:provid][,provid]...[;port[{DES
key}]@CAID[:provid][,provid]...]...
TCP port/DES key/CAID/provid definitions, default:none
example: port =
10000@0100:100000;20000{0102030405060708091011121314}@0200:200000,300000
Each CAID requires a separate port. If you don't specify a DES key
for a port, the default DES key will be used.
serverip = IP address
bind newcamd service to specified IP address, default:all
allowed = IP address|IP address range[,IP address|IP address range]...
newcamd client connections allowed from, default:none
example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255,::1
keepalive = 0|1
0 = disable newcamd keepalive modus, default:0
mgclient = 0|1
1 = provide share information of all available CAIDs and provider
IDs to mgcamd clients, default:0
The [radegast] section
port = 0|port
TCP/IP port for radegast clients, 0 = disabled, default:0
serverip = IP address
bind service to specified IP address, default:all
allowed = IP address|IP address range[,IP address|IP address range]...
client connections allowed from, default:none
example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = username
user name for radegast client
The [serial] section
device = <user>@<device>[:baud][?option1=value1[&option2=value2]...]
[;<user>@<device>[:baud][?option1=value1[&option2=value2]...]]...
parameters:
user = account
device = serial device name|hostname|IP,port
baud = serial port speed (for serial devices only)
option = timeout = milli-seconds, timeout for connection,
default:50
delay = milli-seconds, additional delay between two
characters, default:0
supported serial devices (autodection):
HSIC (humax sharing interface client)
SSSP (simple serial sharing protocol)
bomba (BOMBA firmware)
dsr9500 (DSR 9500)
example: user1@/dev/ttyS1:115200?delay=1&timeout=5000
user2@192.160.0.1,12345?delay=1&timeout=5000
The [cccam] section
port = 0|port[,0|port]...
TCP/IP ports for CCcam clients, 0 = disabled, default:0
version = <main version>.<version>.<sub version>
define CCcam version, minimum CCcam version 2.0.11, used with origi‐
nal CCcam only, default:none
example: version = 1.2.34
reshare = level
reshare level for CCcam clients (default:10):
-1 = no resharing
0 = resharing for direct peer only
1 = resharing for direct peer and next level
x = resharing for direct peer and next x level
reshare_mode = mode
CCcam reshare mode:
0 = reader reshares only received SCs for CCcam readers,
defined filters/CAIDs/provids on other readers
1 = reader reshares received SCs (like=0) and defined services
2 = reader reshares only defined reader services as virtual SCs
3 = reader reshares only defined user services as virtual SCs
4 = reader reshares only received SCs (default)
Every server is shared as hop = 0 and with defined reshare values.
Service reshare only works if positive services defined: no service
- no reshare!
ignorereshare = 0|1
CCcam reshare setting:
0 = use reshare setting of server (default)
1 = use reshare setting of reader or user
stealth = 0|1
1 = behaviour like the original CCcam: no activate partner detection
and extended OSCam-CCcam protocol, prevent other OSCam to detect the
server as OSCam server, default:0
minimizecards = mode
mode how to provide CCcam servers to CCcam clients:
0 = no aggregation, remove duplicates only (default)
1 = based on minimum hop: two SCs with different hops are
summarized, new SCs get a smaller hop
2 = aggregation based on CAIDs: all SCs with the same CAIDs
will be merged, provider (maximum 32) will be merged, too
updateinterval = seconds
interval to provide share list update to CCcam clients, values <= 10
are invalid and will be set to 30, default:240
keepconnected = 0|1
set CCcam keepalive modus:
0 = disconnect client when maximum idle time is reached
1 = keep client connected (default)
recv_timeout = milli-seconds
set network timeout for receiving data, default:2000
forward_origin_card = 0|1
1 = forward ECM request to reader holding this card, load balancer,
fallback and caching will be disabled, default:0
nodeid = ID
set CCcam node ID in hex, default:none
example: nodeid = 0a0b0c0d0e0f1011
The [gbox] section
hostname = hostname| IP address
set hostname or IP address for gbox protocol, default:none
port = port[,port]...
UDP port for gbox server, default:0
my_password = password
password for connection to local gbox peer, default:none
my_vers = version
set gbox version in hexadecimal low byte, default:25
gbox_reconnect = time
send message to peers in seconds, default:300
The [dvbapi] section
enabled = 0|1
1 = DVB API enabled, default:0
Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes into
standby and OSCam remains as SC server only.
listen_port = 0|port
TCP/IP port for SAT IP clients, filtering has to be done on client
site, 0 = disabled, default:0
user = username
user name for DVB API client, default:anonymous
ignore = <CAID>[,<CAID>]... (detached by oscam.dvbapi, obsolete)
CAIDs to be ignored, default:none
services = <service ID>[,<service ID>]... (detached by oscam.dvbapi,
obsolete)
services to be prioritized, default:none
priority = <CAID>:<provider ID>[,CAID:<provider ID>]... (detached by
oscam.dvbapi, obsolete)
CAIDs and provider IDs to be prioritized, default:CAIDs and provider
IDs of local SCs will be prioritized
au = 0|1|2
AU mode:
0 = disable AU (default)
1 = enable AU
pmt_mode = 0|1|2|3|4|5
PMT mode:
0 = use camd.socket and PMT file, default
1 = disable reading PMT file
2 = disable camd.socket
3 = read PMT file on startup only
4 = do not use signal handler for monitoring /tmp
5 = do not use signal handler for monitoring /tmp,
disable camd.socket
request_mode = 0|1
CAID request mode:
0 = try all possible CAIDs one by one (default)
1 = try all CAIDs simultaneously
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-
pmt|qboxhd|coolstream|neumo|pc
set boxtype, auto detection of DVB API will be aspired,
default:dreambox
ipbox with camd.socket support, currently only with PGI image ver‐
sion 0.6 or above, verified on HD models only
ipbox-pmt can be used on any DGS based images (with or without
camd.socket support), verified on HD models only
pc is for generic pc support (currently supported on VDR with vdr-
plugin-dvbapi)
cw_delay = milli-seconds
delay of CW writing, default:none
delayer = milli-seconds
minimum time to write CW, default:0
reopenonzap = 0|1
1 = reopen demux devices on each channel switching, default:0
The [anticasc] section
enabled = 0|1
1 = enabled anti-cascading, default:0
numusers = quantity
anti-cascading: user per account, 0 = anti-cascading disabled,
default:0
sampletime = minutes
duration of sample, default:2
samples = quantity
quantity of samples over limit, default:10
penalty = 0|1|2
level of penalty:
0 = only logging (default)
1 = send fake CWs
2 = temporary user ban
3 = send delayed CWs
penalty can be overwritten per user in oscam.user
aclogfile = filename
file for anti-cascading logging, default:none
fakedelay = milli-seconds
fake delay time, default:1000, minimum value is 100, maximum value
is 3000
denysamples = quantity
how many samples should be penalized, default:8
LOGGING
· reader stages
1 = cacheex (=1) reader (C)
2 = local SCs (L)
3 = other reader / proxies (P)
4 = fallback reader (F)
· logging format
stage/used/chosen/possible
MONITOR
monitor commands:
· login <user> <password>
login (for unencrypted connections only)
· getuser <user> <parameter>=<value>
get parameter for user
· setuser <user> <parameter>=<value>
set parameter for user
· setserver <parameter>=<value>
set parameter for server
· exit
exit monitor
· log <on|onwohist|off>
enable|enable without hitory|disable logging for 2 minutes
· status
list of current processes and clients
· shutdown
shutdown OSCam
· restart
restart OSCam
· keepalive
send keepalive
· reload
reinit user db, clients and anti-cascading, for newcamd connections:
after reloading the provid, please restart newcamd client
· details <PID>
details about selected PID
· reread
read again
· debug <level>
set debug level (monlevel > 3 required)
debug level mask:
0 = no debugging (default)
1 = detailed error messages
2 = ATR parsing info, ECM dumps, CW dumps
4 = traffic from/to the reader
8 = traffic from/to the clients
16 = traffic to the reader-device on IFD layer
32 = traffic to the reader-device on I/O layer
64 = EMM logging
128 = DVB API logging
256 = load balacing logging
512 = cache exchange logging
1024 = client ECM logging
65535 = debug all
· version
show OSCam version
· commands
show all valid monitor commands
WEB INTERFACE
· template system
The web interface allows you to create your own template. For devel‐
oping your own template request the orignal template with the non-
linked page savetemplates.html. Store your own template in the
directory specified by httptpl.
CACHING
types of ECM caching:
· cache1
ECM and CW in cache already.
· cache2
ECM and checksum in cache already.
SEE ALSOlist_smargo(1), oscam(1), oscam.ac(5), oscam.cacheex(5), oscam.cert(5),
oscam.dvbapi(5), oscam.guess(5), oscam.ird(5), oscam.provid(5),
oscam.ratelimit(5), oscam.server(5), oscam.services(5), oscam.srvid(5),
oscam.tiers(5), oscam.user(5), oscam.whitelist(5)oscam.conf(5)
