owampd.conf(5)owampd.conf(5)NAMEowampd.conf - One-way latency daemon configuration file.
DESCRIPTION
The owampd.conf file is the configuration file for the owampd(8) dae‐
mon. It is used to configure the basic operation of the server. For
example, what addresses and ports it should listen on, where it should
send error messages, and where it should save files.
The policy rules for owampd are configured using the owampd.limits
file; the details for configuring those policies are described in the
owampd.limits(5) manual page.
The format of this file is:
· Comment lines are any line where the first non-whitespace
character is '#'. These lines are counted for the pur‐
poses of returning line numbers in error messages but are
otherwise ignored by owampd.
· Lines may be continued using the semi-standard '\' char‐
acter followed immediately by a newline character. This
is the only valid place for the '\' character. If it is
found elsewhere, a syntax error is reported.
· Blank lines are treated as comment lines.
· All other lines are used to set configuration options.
The format of these lines is an initial keyword followed
by a variable list of arguments, separated by whitespace.
CONFIGURATION OPTIONS
authmode authmode
Specify the authentication modes the server is willing to use
for communication. authmode should be set as a character string,
with any or all of the characters "AEO". The modes are:
A [A]uthenticated. This mode encrypts the control connec‐
tion and encrypts part of each test packet.
E [E]ncrypted. This mode encrypts the control connection
and encrypts each test packet in full. This mode forces
an encryption step between the fetching of a timestamp
and when the packet is sent. This adds more computational
delay to the time reported by OWAMP for each packet.
O [O]pen. No encryption of any kind is done.
The server can specify all the modes with which it is willing to
communicate. The most strict mode that both the server and the
client are willing to use will be selected.
Default:
"AEO".
controltimeout controltimeout
Number of seconds to wait for protocol messages before timing
out.
Default:
1800
datadir datadir
Directory path where data files will be placed. The data files
are the "receive" session files that are buffered on the server.
Policy restrictions can be used to set how much disk space a
given connection can use, as well as to determine when each file
is deleted. (See the owampd.limits(f) manual page.)
Default:
Current directory
dieby dieby
Number of seconds to wait for child processes to gracefully ter‐
minate before killing them with SIGKILL. This is in response to
the master process receiving SIGTERM or SIGHUP.
This option should no longer be needed. If child processes are
not exiting gracefully, please send a bug report to owamp-
users@internet2.edu.
Default:
30
diskfudge diskfudge
Fudge factor to use when determining if a buffered owp file
should be kept. It creates a hard limit for disk usage. The
soft limit is determined by the limitclass that a connection
matches [see the owampd.limits(5) manual page] and is applied
when a test is requested. If the estimated file-size of the test
would put the limitclass over the soft limit, then the test is
denied. However, it is possible, due to duplicate packets, that
a test session file may end up larger than this estimate. If
that happens, and if the file is successfully saved to disk,
then, upon completion of the test, the actual file-size is used
to update the disk usage in the resource broker process. At this
point, the hard limit is applied. The hard limit is determined
by multiplying the soft limit by the diskfudge. If the final
file-size causes the disk space used by the limitclass to be
larger than the quota defined by the hard limit then the file is
immediately deleted.
A liberal factor is recommended because this factor won't come
in to play unless there are numerous duplicates, and that is
precisely the kind of data most users will want to see. However,
it is important to have this factor to ensure disk usage is not
too vulnerable to replay DOS attacks of the test protocol.)
The valid values for diskfudge are 1.0-10.0.
Default:
1.0 (hard limit is the same as the soft limit)
enddelay enddelay
Amount of time for a sender to wait after session completion
(last packet send-time plus timeout) before sending the stop
sessions message.
This is important if the sender clock is running ahead of the
receiver clock.
A session is complete timeout after the send time of the final
packet. If the sender clock is ahead of the receivers clock,
the sender will declare the session complete before the
receiver. The receiver is only allowed to retain records for the
packets that were sent at least timeout before it receives the
stop sessions message from the sender. Therefore, if the sender
clock is running ahead of the receiver clock, the receiver will
be forced to delete some number of the final packets from the
session.
This parameter directs the sender to wait enddelay after session
completion allowing the receiver clock to be essentially endde‐
lay later than the sender clock and still retain full sessions.
Default:
1.0 (seconds)
facility facility
Specify the syslog facility to log messages.
Default:
LOG_DAEMON
group group
Specifies the gid the owampd process should run as. group can be
specified using a valid group name on the system or by using
-gid. This option is only used if owampd is started as root.
This option can be useful to limit log-file permissions to only
users in this group.
loglocation
Directs the owampd process to report source code file and line
number information with error messages. This is a particularly
useful option to set when sending in messages as part of a bug
report.
pbkdf2_count count
This indicates the count parameter for the pseudo-random key
derivation function that is used to derive the session key from
the long term key stored in the owampd.pfs file.
Default:
2048
rootfolly
If present, this disables the requirement that owampd run with
non-root permissions. There are legitimate reasons to run owampd
as root, but it is more risky. (For example, some operating sys‐
tems require root permissions to set the TOS bits used by the -D
and -H options of owping.) This additional option was added to
ensure root permissions are only used when explicitly intended.
srcnode nodename:port
Specify the address and port that owampd will listen for
requests. nodename can be specified using a DNS name or using
the textual representation of the address. It is possible to set
the source address without setting the port by simply leaving
off the ':' and port specification. Likewise, a non-default port
can be specified for all system addresses (wildcard) by starting
the specification string with a ':'. If an IPv6 address is
specified, note that the accepted format contains nodename in
square brackets as: [fe80::fe9f:62d8]. This ensures the port
number is distinct from the address specification. The address
can be wildcarded by only specifying the port portion.
Because the default port for owampd is in the protected range
for most operating systems, it is usually required that owampd
is stared as root. This option can be used to specify a non-
standard port value that is not protected.
Default:
nodename is wildcarded as any currently available address
port is 861.
testports 0 | lowport-highport
Specify the specific port range to use on the local host for
OWAMP-Test packets. This can be specified in two ways. First, as
0 which would indicate owampd should allow the system to pick
the port (ephemeral). Second, as a range. lowport must be a
smaller value than highport and both numbers must be valid port
values. (16 bit unsigned integer values)
Default:
0
user user
Specifies the uid the owampd process should run as. user can be
specified using a valid user name on the system or by using
-uid. This option is only used if owampd is started as root.
In the default case, owampd should be started as root so it can
bind the default port 861. (See srcnode option.) owampd will
release root permissions shortly after binding to this protected
port and requests will be serviced by processes running with
permissions defined by the user.
vardir vardir
Directory path where the owampd.pid and owampd.info files will
be placed.
Default:
Current directory
verbose
If this option is present, it directs the owampd process to gen‐
erate more verbose messages to syslog.
SEE ALSOowping(1), owampd(8), owampd.limits(5), owampd.pfs(5), pfstore(1), and
the http://e2epi.internet2.edu/owamp/ web site.
ACKNOWLEDGMENTS
This material is based in part on work supported by the National Sci‐
ence Foundation (NSF) under Grant No. ANI-0314723. Any opinions, find‐
ings and conclusions or recommendations expressed in this material are
those of the author(s) and do not necessarily reflect the views of the
NSF.
$Date: 2007-03-07 15:36:17 -0500 (Wed, 07 Mar 2007)owampd.conf(5)
