pam_krb5(8) System Administrator's Manual pam_krb5(8)NAMEpam_krb5 - Kerberos 5 authentication
SYNOPSIS
auth required /lib64/security/pam_krb5.so
session optional /lib64/security/pam_krb5.so
account sufficient /lib64/security/pam_krb5.so
password sufficient /lib64/security/pam_krb5.so
DESCRIPTION
The pam_krb5.so module is designed to allow smooth integration of Ker‐
beros 5 password-checking for applications which use PAM. It creates
session-specific credential cache files, and can obtain Kerberos IV
credentials using a krb524 service. If the system is an AFS client, it
will also attempt to obtain tokens for the local cell, the cell which
contains the user's home directory, and any explicitly-configured
cells.
When a user logs in, the module's authentication function performs a
simple password check and, if possible, obtains Kerberos 5 and Kerberos
IV credentials, caching them for later use. When the application
requests initialization of credentials (or opens a session), the usual
ticket files are created. When the application subsequently requests
deletion of credentials or closing of the session, the module deletes
the ticket files. When the application requests account management, if
the module did not participate in authenticating the user, it will sig‐
nal libpam to ignore the module. If the module did participate in
authenticating the user, it will check for an expired user password and
verify the user's authorization using the .k5login file of the user
being authenticated, which is expected to be accessible to the module.
ARGUMENTS
debug turns on debugging via syslog(3). Debugging messages are logged
with priority LOG_DEBUG.
debug_sensitive
turns on debugging of sensitive information via syslog(3).
Debug messages are logged with priority LOG_DEBUG.
addressless
tells pam_krb5.so to obtain credentials without address lists.
This may be necessary if your network uses NAT, and should oth‐
erwise not be used. This option is deprecated in favor of the
noaddresses flag in the libdefaults section of krb5.conf(5).
afs_cells=cell.example.com[,...]
tells pam_krb5.so to obtain tokens for the named cells, in addi‐
tion to the local cell, for the user. The module will guess the
principal name of the AFS service for the named cells, or it can
be specified by giving cell in the form cellname=principalname.
banner=Kerberos 5
tells pam_krb5.so how to identify itself when users attempt to
change their passwords. The default setting is "Kerberos 5".
ccache_dir=/tmp
tells pam_krb5.so which directory to use for storing credential
caches. The default setting is /tmp.
ccname_template=FILE:%d/krb5cc_%U_XXXXXX
specifies the location in which to place the user's session-spe‐
cific credential cache. This value is treated as a template,
and these sequences are substituted:
%u login name
%U login UID
%p principal name
%r realm name
%h home directory
%d the default ccache directory (as set with ccache_dir)
%P the current process ID
%% literal '%'
The default setting is "FILE:%d/krb5cc_%U_XXXXXX".
existing_ticket
tells pam_krb5.so to accept the presence of pre-existing Ker‐
beros credentials provided by the calling application in the
default credential cache as sufficient to authenticate the user,
and to skip any account management checks.
DANGER! Unless validation is also in use, it is relatively easy
to produce a credential cache which looks "good enough" to fool
pam_krb5.so.
external
external=sshd
tells pam_krb5.so to use Kerberos credentials provided by the
calling application during session setup. This is most often
useful for obtaining AFS tokens or a krb4 ticket.
forwardable
tells pam_krb5.so that credentials it obtains should be forward‐
able. This option is deprecated in favor of the forwardable
option in the libdefaults section of krb5.conf(5).
hosts=host[,...]
tells pam_krb5.so to obtain credentials using the addresses of
the given hosts in addition to the addresses of interfaces on
the local workstation. For example, if your workstation is
behind a masquerading firewall, specifying the firewall's out‐
ward-facing address here should allow Kerberos authentication to
succeed. This option is deprecated in favor of the
extra_addresses flag in the libdefaults section of krb5.conf(5).
ignore_unknown_principals
ignore_unknown_spn
ignore_unknown_upn
specifies that not pam_krb5 should return a PAM_IGNORE code to
libpam instead of PAM_USER_UNKNOWN for users for whom the deter‐
mined principal name is expired or does not exist.
keytab=FILE:/etc/krb5.keytab
tells pam_krb5.so the location of a keytab to use when validat‐
ing credentials obtained from KDCs.
krb4_convert
tells pam_krb5.so to obtain Kerberos IV credentials for users,
in addition to Kerberos 5 credentials, using either a v4-capable
KDC or a krb524 service. This option is poorly named. This
option is automatically enabled if AFS is detected.
krb4_convert_524
tells pam_krb5.so to obtain Kerberos IV credentials for users
using the krb524 service. This option modifies the krb4_convert
option. If disabled, pam_krb5 will only attempt to obtain Ker‐
beros IV credentials using the KDC.
krb4_use_as_req
tells pam_krb5.so to obtain Kerberos IV credentials for users
using the KDC. This option modifies the krb4_convert option.
If disabled, pam_krb5 will only attempt to obtain Kerberos IV
credentials using the krb524 service.
minimum_uid=0
tells pam_krb5.so to ignore authentication attempts by users
with UIDs below the specified number.
no_initial_prompt
tells pam_krb5.so to not ask for a password before attempting
authentication, and to instead allow the Kerberos library to
trigger a request for a password only in cases where one is
needed.
no_subsequent_prompt
tells pam_krb5.so to only provide the previously-entered pass‐
word in response to any request for a password which the Ker‐
beros library might make. If the calling application does not
properly support PAM conversations (possibly due to limitations
of a network protocol which it is serving), this may be need to
be used to prevent the application from supplying the user's
current password in a password-changing situations when a new
password is called for.
no_user_check
tells pam_krb5.so to not check if a user exists on the local
system, to skip authorization checks using the user's .k5login
file, and to create ccache files owned by the current process's
UID. This is useful for situations where a non-privileged
server process needs to use Kerberized services on behalf of
remote users who may not have local access. Note that such a
server should have an encrypted connection with its client in
order to avoid allowing the user's password to be eavesdropped.
null_afs
tells pam_krb5.so, when it attempts to set tokens, to try to get
credentials for services with names which resemble afs@REALM
before attempting to get credentials for services with names
resembling afs/cell@REALM. The default is to assume that the
cell's name is the instance in the AFS service's Kerberos prin‐
cipal name.
preauth_options=[]
controls the preauthentication options which pam_krb5 passes to
libkrb5, if the system-defaults need to be overridden. The list
is treated as a template, and these sequences are substituted:
%u login name
%U login UID
%p principal name
%r realm name
%h home directory
%d the default ccache directory
%P the current process ID
%% literal '%'
proxiable
tells pam_krb5.so that credentials it obtains should be proxi‐
able. This option is deprecated in favor of the proxiable
option in the libdefaults section of krb5.conf(5).
pwhelp=filename
specifies the name of a text file whose contents will be dis‐
played to clients who attempt to change their passwords. There
is no default.
realm=realm
overrides the default realm set in /etc/krb5.conf, which
pam_krb5.so will attempt to authenticate users to.
renew_lifetime=36000
sets the default renewable lifetime for credentials. This
option is deprecated in favor of the renew_lifetime option in
the libdefaults section of krb5.conf(5).
ticket_lifetime=36000
sets the default lifetime for credentials.
tokens
tokens=imap
signals that pam_krb5.so should create a new AFS PAG and obtain
AFS tokens during authentication in addition to session setup.
This is primarily useful in server applications which need to
access a user's files but which do not open PAM sessions before
doing so. A properly-written server will not need this flag set
in order to function correctly.
try_first_pass
tells pam_krb5.so to check the previously-entered password as
with use_first_pass, but to prompt the user for another one if
the previously-entered one fails. This is the default mode of
operation.
use_first_pass
tells pam_krb5.so to get the user's entered password as it was
stored by a module listed earlier in the stack, usually pam_unix
or pam_pwdb, instead of prompting the user for it.
use_authtok
tells pam_krb5.so to never prompt for new passwords when chang‐
ing passwords. This is useful if you are using pam_cracklib or
pam_passwdqc to try to enforce use of less-easy-to-guess pass‐
words.
use_shmem
use_shmem=sshd
tells pam_krb5.so to pass credentials from the authentication
service function to the session management service function
using shared memory, or to do so for specific services.
validate
validate=sshd
tells pam_krb5.so to verify that the TGT obtained from the
realm's servers has not been spoofed. Note that the process
which is performing authentication must be able to read the
keytab in order for validation to be possible.
FILES
/etc/krb5.conf
SEE ALSOpam_krb5(5)krb5.conf(5)BUGS
Probably, but let's hope not. If you find any, please file them in the
bug database at http://bugzilla.redhat.com/ against the "pam_krb5" com‐
ponent.
AUTHOR
Nalin Dahyabhai <nalin@redhat.com>
openSUSE 2008/03/03 pam_krb5(8)
