quvi(1)quvi manual quvi(1)NAMEquvi - query media tool
SYNOPSISquvi [options] [url ...] [file ...]
DESCRIPTIONquvi is a command line tool for parsing flash media stream URLs. It
supports many websites including YouTube and Dailymotion.
COMMAND LINE PARSER
GNU gengetopt is very flexible.
Example
quvi--category http --category rtmp --verbosity debug \
--export-level +errors --feature -verify --feature -resolve
Same as above but with short options
quvi-c http -c rtmp -v debug -l +errors -e -verify -e -resolve
Or even simply
quvi-ch -cr -vd -l+ -e-v -e-r
OPTIONSquvi reads standard input by default. It can also read the URLs from
files but expects each URL to be separated by a newline character.
-h, --help
Print help and exit.
--version
Print program version and exit.
--license
Print license and exit.
--support [arg]
Print supported hosts and exit. If arg is present, the program checks
whether the arg is supported.
The default behaviour, without an arg, causes quvi to print the
supported websites. The first string is the domain string which is, in
fact, a (Lua) pattern used to match the URL to a libquvi script. The
second string is, now obsolete (see below), an array containing the
supported formats specific to the host.
Use "--query-formats" if you need to check an URL for the available
formats.
See also "EXAMPLES".
-e, --feature arg
Enable or disable a feature. See also "EXAMPLES". Possible values:
resolve (default)
Resolve HTTP directions, e.g. shortened URLs. See below.
-resolve
Do not resolve HTTP redirections. When used, quvi will not be able to
resolve most of the "shortened URLs" produced by different URL
shortening services.
Note that libquvi scripts that explicitly (need to) resolve
redirections will continue to do so even if this switch is used.
verify (default)
Verify media stream URL after parsing. See below.
-verify
Do not verify media stream URL after parsing. When used, some media
details, e.g. content length, will not become available.
Note that libquvi skips the verification automatically with all non-
HTTP media stream URLs.
proxy (default)
Use a HTTP proxy with connections if it is defined using either the
"--proxy" or the http_proxy value. See below.
-proxy
Disable use of a HTTP proxy completely. Proxy will not be used even if
it is defined in http_proxy.
-d, --export-format arg (=json)
Set the interchange format in which the data is to be printed.
Possible values:
json .. Print in JSON (default)
xml .. Print in XML
-l, --export-level arg (=media)
Set level of the exported interchange data. Possible values:
media .. Media only (default)
+errors .. Media and error messages
See also "--export-format".
-v, --verbosity arg (=verbose)
Set the verbosity level of the printed messages. Possible values:
debug .. Everything, including libcurl generated messages
verbose .. Most messages (default)
quiet .. Errors and warnings only
mute .. Nothing at all
--exec arg
Invoke arg after each successfully parsed URL. The following specifiers
are supported:
%u .. Media stream URL
%t .. Media title
%e .. Media file suffix (extension)
%h .. Media thumbnail URL
Note that each occurence of the specifier will be replaced within the
arg. quvi accepts multiple occurrences of "--exec". See also
"EXAMPLES".
-c, --category arg (=all)
Enable the level of the libquvi script categories. By default, all of
the categories levels are enabled. Possible values:
http .. HTTP category scripts only
rtmp .. RTMP ...
rtsp .. RTSP ...
mms .. MMS ...
all .. All of the above
quvi accepts multiple occurrences of "--category". See also "EXAMPLES".
-F, --query-formats
Query available formats to the URL. The returned array is created from
the data returned by the server. You can use the format strings in this
array with "--format".
The available formats are determined by the libquvi script responsible
for parsing the media details.
See also "--format".
-f, --format arg (=default)
Query media details for the format arg. The arg may also be "default"
or "best". The arg value is used with all of the URLs fed to quvi.
If the arg is "best", the libquvi script responsible for parsing the
media details will determine the "best" format available to an URL.
If the arg is "default" the libquvi script attempts to return an URL to
whatever it deemed to be the "default" format for the URL.
The libquvi script will return the "default" format if the arg was
unrecognized or the requested format was not available.
You can find more information about the YouTube specific "fmt" IDs at:
<http://en.wikipedia.org/wiki/YouTube#Quality_and_codecs>
See also "--query-formats".
--agent arg (=Mozilla/5.0)
Identify quvi as arg to the HTTP servers. Default is "Mozilla/5.0".
--proxy arg
Use proxy for HTTP connections, e.g. "http://foo:1234". You can also
define http_proxy environment setting to for the same effect.
--connect-timeout seconds
Maximum seconds allowed connection to server take. Default is 30.
DEPRECATED
The following options have been marked as "deprecated" and will be
removed in the later versions of quvi.
--no-proxy
Disable use of HTTP proxy completely. Proxy will not be used even if it
is defined in http_proxy. Use "--feature" instead.
-r, --no-resolve
Do not resolve HTTP redirections. When used, quvi will not be able to
resolve most of the "shortened URLs" produced by different URL
shortening services.
Note that libquvi scripts that explicitly (need to) resolve
redirections will continue to do so even if this switch is used. Use
"--feature" instead.
-n, --no-verify
Do not verify media stream URL after parsing. When used, some media
details, e.g. content length, will not become available.
Note that libquvi skips the verification automatically with all non-
HTTP media stream URLs. Use "--feature" instead.
-q, --quiet
Turn off all output printed to stderr (excl. any errors). If
"--verbose-libcurl" is specified, libcurl will continue to print
messages to stderr. The media details will still be printed to stdout.
Use "--verbosity" instead.
--verbose-libcurl
Turn on libcurl verbose mode. Use "--verbosity" instead.
--xml
Print the media details (and errors, if "--export-level=+errors" is
specified) in XML. Use "--export-format" instead.
--category-http
Enable category HTTP webscripts. This is the default category. Use
"--category" instead.
--category-mms
Enable category MMS webscripts. Use "--category" instead.
--category-rtsp
Enable category RTSP webscripts. Use "--category" instead.
--category-rtmp
Enable category RTMP webscripts. Use "--category" instead.
--category-all
Enable all categories of webscripts. Use "--category" instead.
EXAMPLES
Always quote the URLs in the command line as seen below. Many URLs
contain parameters that may otherwise cause the shell to behave with
unexpected results.
quvi "URL"
Typical use.
quvi-d xml "URL"
Same but print the results in XML.
quvi-f best "URL"
Get for the best available format of the media. This assumes >1 formats
are supported, otherwise will fallback to default format.
quvi-F "URL"
Query available formats to the URL. Use one of the returned format
strings from this list with "--format".
quvi--support
Print the supported websites. The domain strings are patterns.
quvi--support -c rtmp -c mms
Same but print only those from the RTMP and the MMS categories.
quvi--support "URL"
Check whether the URL is supported. This does not require an Internet
connection but will fail with most "shortened" URLs.
quvi-vm -e-r -e-v "URL" --exec "echo %t" --exec "vlc %u"
Mute message output (-vm), do not resolve HTTP redirections (-e-r) and
skip media stream URL verification (-e-v). Print media title using
echo(1), open media stream URL in vlc(1).
FILES
$HOME/.quvirc
Most of the command line options can also be defined in the
configuration file. For example:
agent = foo/1.0 # --agent
proxy = http://foo:1234 # --proxy
You can also use $QUVI_HOME instead of $HOME.
ENVIRONMENTquvi
QUVI_HOME
Path to the directory with the configuration file. If set, quvi command
uses this instead of $HOME.
libquvi
LIBQUVI_SCRIPTSDIR
Path to the libquvi-scripts directory. Overrides the libquvi default
search paths for the scripts, e.g.:
env LIBQUVI_SCRIPTSDIR=/dir/with/quvi/lua/scripts/ quvi
Make sure it points to a directory containing the lua/ directory with
the expected "util/*.lua" and "website/quvi/*.lua" scripts that are
normally installed with libquvi-scripts.
For a totorial that covers these steps, see the libquvi C API
documentation at:
<http://quvi.sourceforge.net/doc/>
LIBQUVI_SHOW_SCANDIR
If set, libquvi prints the lua script search paths to the stderr.
LIBQUVI_SHOW_SCRIPT
If set, the lua scripts found by libquvi are printed to the stderr.
env LIBQUVI_SHOW_SCRIPT=1 quvi
libcurl
http_proxy
http_proxy value is used if defined. Note, however, that "--proxy" and
"--feature -proxy" both override this behaviour.
EXIT STATUSquvi exits with 0 on success and >0 if an error occurred.
QUVI_OK = 0x00
QUVI_MEM = 0x01, Memory allocation failed
(or invalid quvi command line option)
QUVI_BADHANDLE = 0x02, Bad session handle
QUVI_INVARG = 0x03, Invalid function (or command line) arg
QUVI_CURLINIT = 0x04, libcurl initialization failed
QUVI_LAST = 0x05, Indicates end of list iteration
QUVI_ABORTEDBYCALLBACK= 0x06, Aborted by callback function
QUVI_LUAINIT = 0x07, Lua initialization failure
QUVI_NOLUAWEBSITE = 0x08, Failed to find lua webscripts
QUVI_NOLUAUTIL = 0x09, Failed to find the utility scripts
--
QUVI_NOSUPPORT = 0x41, libquvi does not support the host
QUVI_CALLBACK = 0x42, network callback error occurred
QUVI_ICONV = 0x43, libiconv error occurred
QUVI_LUA = 0x44, lua error occurred
WWW
Home : http://quvi.sourceforge.net/
gitweb: http://repo.or.cz/w/quvi-tool.git
LICENSEquvi is free software, licensed under the LGPLv2.1+.
SEE ALSOlibquvi(3), libquvi-scripts(7)AUTHOR
Toni Gundogdu <legatvs at sign gmail com>
Thanks to all those who have contributed to the project by sending
patches, reporting bugs and writing feedback. You know who you are.
v0.4.2 2012-03-01 quvi(1)
