repoquery(1)repoquery(1)NAMErepoquerySYNOPSISrepoquery [options] <item ...>
repoquery-a [options]
DESCRIPTIONrepoquery is a program for querying information from YUM repositories
similarly to rpm queries.
GENERAL OPTIONS--querytags
List valid queryformat tags and exit..
-v, --version
Report program version and exit.
--repoid=<repo>
Specify which repository to query. Using this option disables
all repositories not explicitly enabled with --repoid option
(can be used multiple times). By default repoquery uses whatever
repositories are enabled in YUM configuration.
--enablerepo=<repo>
In addition to the default set, query the given additional
repository, even if it is disabled in YUM configuration. Can be
used multiple times.
--disablerepo=<repo>
Do not query the given repository, even if it is enabled in YUM
configuration. Can be used multiple times.
--repofrompath=<repoid>,<path/url>
Specify a path or url to a repository (same path as in a
baseurl) to add to the repositories for this query. This option
can be used multiple times. If you want to view only the pkgs
from this repository combine this with --repoid. The repoid for
the repository is specified by <repoid>.
--plugins
Enable YUM plugin support.
-q, --query
For rpmquery compatibility, doesn't do anything.
-h, --help
Help; display a help message and then quit.
--quiet
Run quietly: no warnings printed to stderr.
--verbose
Produce verbose output.
-C, --cache
Tells repoquery to run entirely from YUM cache - does not down‐
load any metadata or update the cache. Queries in this mode can
fail or give partial/incorrect results if the cache isn't fully
populated beforehand with eg "yum makecache".
--tempcache
Create and use a private cache instead of the main YUM cache.
This is used by default when run as non-root user.
-c <config file>, --config=<config file>
Use alternative config file (default is /etc/yum.conf).
--releasever=version
Pretend the current release version is the given string. This is
very useful when combined with --installroot. You can also use
--releasever=/ to take the releasever information from outside
the installroot. Note that with the default upstream cachedir,
of /var/cache/yum, using this option will corrupt your cache
(and you can use $releasever in your cachedir configuration to
stop this).
--setopt=option=value
Set any config option in yum config or repo files. For options
in the global config just use: --setopt=option=value for repo
options use: --setopt=repoid.option=value
PACKAGE QUERY OPTIONS-i, --info
Show general information about package similarly to "rpm -qi"
-l, --list
List files in package.
-R, --requires
List package dependencies.
--resolve
When used with --requires, resolve capabilities to originating
packages.
--provides
List capabilities package provides.
--obsoletes
List capabilities obsoleted by package.
--conflicts
List capabilities conflicting with package.
--changelog
List package changelog.
--location
Show a location where the package could be downloaded from. For
example: wget `repoquery --location yum`
-s, --source
Show package source RPM name.
--srpm Operate on corresponding source RPM.
--groupmember PACKAGE
List the repodata groups (yumgroups.xml) belongs to (if any).
--nvr Use name-version-release output format (rpm query default)
--nevra
Use name-epoch:version-release.architecture output format
(default)
--envra
Use epoch:name-version-release.architecture output format (eas‐
ier to parse than nevra)
--qf=FORMAT, --queryformat=FORMAT
Specify custom output format for queries. You can add ":date",
":day" and ":isodate" to all the tags that are a time, and you
can add ":k", ":m", ":g", ":t" and ":h" to sizes. You can also
specify field width as in sprintf (Eg. %-20{name})
--output [text|ascii-tree|dot-tree]
Output format which can be used with --requires/--whatre‐
quires/--obsoletes/--conflicts. Default output is 'text'.
--level [all|any int]
In combination with --output ascii-tree|dot-tree this option
specifies the number of level to print on the tree. Default
level is 'all'.
PACKAGE SELECTION OPTIONS-a, --all
Query all available packages (for rpmquery compatibility /
shorthand for repoquery '*')
-f, --file FILE
Query package owning FILE.
--whatobsoletes CAPABILITY
Query all packages that obsolete CAPABILITY.
--whatconflicts CAPABILITY
Query all packages that conflict with CAPABILITY.
--whatprovides CAPABILITY
Query all packages that provide CAPABILITY.
--whatrequires CAPABILITY
Query all packages that require CAPABILITY.
--alldeps
When used with --whatrequires, look for non-explicit dependen‐
cies in addition to explicit ones (e.g. files and Provides in
addition to package names). This is the default.
--exactdeps
When used with --whatrequires, search for dependencies only
exactly as given. This is effectively the opposite of
--alldeps.
--recursive
When used with --whatrequires, and --requires --resolve, query
packages recursively.
--archlist=ARCH1[,ARCH2...]
Limit the query to packages of given architecture(s). Valid val‐
ues are all architectures known to rpm/yum such as 'i386' and
'src' for source RPMS. Note that repoquery will now change yum's
"arch" to the first value in the archlist. So "--arch‐
list=i386,i686" will change yum's canonical arch to i386, but
allow packages of i386 and i686.
--pkgnarrow=WHAT
Limit what packages are considered for the query. Valid values
for WHAT are: installed, available, recent, updates, extras, all
and repository (default).
--installed
Restrict query ONLY to installed pkgs - disables all repos and
only acts on rpmdb.
GROUP QUERY OPTIONS-i, --info
Show general information about group.
-l, --list
List packages belonging to (required by) group.
--grouppkgs=WHAT
Specify what type of packages are queried from groups. Valid
values for WHAT are all, mandatory, default, optional.
--requires
List groups required by group.
GROUP SELECTION OPTIONS-a Query all available groups.
-g, --group
Query groups instead of packages.
EXAMPLES
List all packages whose name contains 'perl':
repoquery '*perl*'
List all packages depending on openssl:
repoquery--whatrequires openssl
List all package names and the repository they come from, nicely for‐
matted:
repoquery-a --qf "%-20{repoid} %{name}"
List name and summary of all available updates (if any), nicely format‐
ted:
repoquery-a --pkgnarrow=updates --qf "%{name}:\n%{summary}\n"
List optional packages in base group:
repoquery-g --grouppkgs=optional -l base
List build requirements from 'anaconda' source rpm:
repoquery--requires anaconda.src
List packages which BuildRequire gail-devel
repoquery --archlist=src --whatrequires gail-devel
NB: This command will only work if you have repositories
enabled which include srpms.
MISC
Specifying package names
A package can be referred to in all queries with any of the fol‐
lowing:
name
name.arch
name-ver
name-ver-rel
name-ver-rel.arch
name-epoch:ver-rel.arch
epoch:name-ver-rel.arch
For example: repoquery-l kernel-2.4.1-10.i686
Additionally wildcards (shell-style globs) can be used.
FILES
As repoquery uses YUM libraries for retrieving all the information, it
relies on YUM configuration for its default values like which reposito‐
ries to use. Consult YUM documentation for details:
/etc/yum.conf
/etc/yum/repos.d/
/var/cache/yum/
SEE ALSO
yum.conf (5)
http://yum.baseurl.org/
AUTHORS
See the Authors file included with this program.
BUGS
There are of course no bugs, but should you find any, you should first
consult the FAQ section on http://yum.baseurl.org/wiki/Faq and if
unsuccessful in finding a resolution contact the mailing list: yum-
devel@lists.baseurl.org. To file a bug use http://bugzilla.redhat.com
for Fedora/RHEL/Centos related bugs and http://yum.baseurl.org/report
for all other bugs.
Panu Matilainen 17 October 2005 repoquery(1)
