set_volume_per_voice(3) Allegro manual set_volume_per_voice(3)NAMEset_volume_per_voice - Sets the volume of a voice. Allegro game pro‐
gramming library.
SYNOPSIS
#include <allegro.h>
void set_volume_per_voice(int scale);
DESCRIPTION
By default, Allegro will play a centered sample at half volume on both
the left and right channel. A sample panned to the far right or left
will be played at maximum volume on that channel only. This is done so
you can play a single panned sample without distortion. If you play
multiple samples at full volume, the mixing process can result in clip‐
ping, a noticeable form of distortion. The more samples, the more
likely clipping is to occur, and the more clipping, the worse the out‐
put will sound.
If clipping is a problem - or if the output is too quiet - this func‐
tion can be used to adjust the volume of each voice. You should first
check that your speakers are at a reasonable volume, Allegro's global
volume is at maximum (see set_volume() below), and any other mixers
such as the Windows Volume Control are set reasonably. Once you are
sure that Allegro's output level is unsuitable for your application,
use this function to adjust it.
Each time you increase the parameter by one, the volume of each voice
will halve. For example, if you pass 4, you can play up to 16 centred
samples at maximum volume without distortion.
If you pass 0 to this function, each centred sample will play at the
maximum volume possible without distortion, as will all samples played
through a mono driver. Samples at the extreme left and right will dis‐
tort if played at full volume. If you wish to play panned samples at
full volume without distortion, you should pass 1 to this function.
Note: this is different from the function's behaviour in WIPs 3.9.34,
3.9.35 and 3.9.36. If you used this function under one of these WIPs,
you will have to increase your parameter by one to get the same volume.
Note: The default behaviour has changed as of Allegro 4.1.15. If you
would like the behaviour of earlier versions of Allegro, pass -1 to
this function. Allegro will choose a value dependent on the number of
voices, so that if you reserve n voices, you can play up to n/2 nor‐
malised samples with centre panning without risking distortion. The
exception is when you have fewer than 8 voices, where the volume
remains the same as for 8 voices. Here are the values, dependent on the
number of voices:
1-8 voices - set_volume_per_voice(2)
16 voices - set_volume_per_voice(3)
32 voices - set_volume_per_voice(4)
64 voices - set_volume_per_voice(5)
Of course this function does not override the volume you specify with
play_sample() or voice_set_volume(). It simply alters the overall out‐
put of the program. If you play samples at lower volumes, or if they
are not normalised, then you can play more of them without distortion.
It is recommended that you hard-code the parameter into your program,
rather than offering it to the user. The user can alter the volume with
the configuration file instead, or you can provide for this with
set_volume().
To restore volume per voice to its default behaviour, pass 1.
SEE ALSOreserve_voices(3), set_volume(3), install_sound(3),
detect_digi_driver(3), detect_midi_driver(3)Allegro version 4.4.2 set_volume_per_voice(3)