sys_attrs_emx(5) sys_attrs_emx(5) NAME sys_attrs_emx - emx subsystem attributes DESCRIPTION This reference page lists and describes attributes for the emx (emx) kernel subsystem. Refer also to the emx(7) reference page for addi‐ tional emx kernel subsystem attributes. Refer to the sys_attrs(5) reference page for an introduction to the topic of kernel subsystem attributes. Maximum number of NPort I/Os. This attribute is visible only if the Emulex Fibre Channel Host Adapter is installed on the system. Refer to the emx(7) reference page for information on setting this attribute. Default value: 256. To turn I/O limiting off, set the value of NPort_Max_IOs to equal 0xFFFFFFFF. Do not attempt to set the value of NPort_Max_IOs to less than the value of NPort_Min_IOs. Minumum number of NPort I/Os. This attribute is visible only if the Emulex Fibre Channel Host Adapter is installed on the system. Refer to the emx(7) refer‐ ence page for information on setting this attribute. Default value: 20. The value of NPort_Min_IOs must always be less than the value of NPort_Max_IOs. The NPort I/O ramp time delay in seconds. This attribute is visible only if the Emulex Fibre Channel Host Adapter is installed on the system. Refer to the emx(7) refer‐ ence page for information on setting this attribute. Default value: 1. The NPort I/O ramp percentage (integer). This attribute is visible only if the Emulex Fibre Channel Host Adapter is installed on the system. Refer to the emx(7) refer‐ ence page for information on setting this attribute. Default value: 10 SEE ALSO sys_attrs(5) emx(7) sys_attrs_emx(5)[top]
Vote for polarhome |