system_dbusd_selinux(8) SELinux Policy system_dbusd system_dbusd_selinux(8)NAMEsystem_dbusd_selinux - Security Enhanced Linux Policy for the sys‐
tem_dbusd processes
DESCRIPTION
Security-Enhanced Linux secures the system_dbusd processes via flexible
mandatory access control.
The system_dbusd processes execute with the system_dbusd_t SELinux
type. You can check if you have these processes running by executing
the ps command with the -Z qualifier.
For example:
ps -eZ | grep system_dbusd_t
ENTRYPOINTS
The system_dbusd_t SELinux type can be entered via the dbusd_exec_t
file type.
The default entrypoint paths for the system_dbusd_t domain are the fol‐
lowing:
/usr/bin/dbus-daemon(-1)?, /bin/dbus-daemon, /lib/dbus-1/dbus-daemon-
launch-helper, /usr/lib/dbus-1/dbus-daemon-launch-helper
PROCESS TYPES
SELinux defines process types (domains) for each process running on the
system
You can see the context of a process using the -Z option to ps
Policy governs the access confined processes have to files. SELinux
system_dbusd policy is very flexible allowing users to setup their sys‐
tem_dbusd processes in as secure a method as possible.
The following process types are defined for system_dbusd:
system_dbusd_t
Note: semanage permissive -a system_dbusd_t can be used to make the
process type system_dbusd_t permissive. SELinux does not deny access to
permissive process types, but the AVC (SELinux denials) messages are
still generated.
BOOLEANS
SELinux policy is customizable based on least access required. sys‐
tem_dbusd policy is extremely flexible and has several booleans that
allow you to manipulate the policy and run system_dbusd with the tight‐
est access possible.
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server, you must turn on the authlo‐
gin_nsswitch_use_ldap boolean. Disabled by default.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow all daemons the ability to read/write terminals,
you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other
processes, you must turn on the deny_ptrace boolean. Enabled by
default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors,
you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you
must turn on the domain_kernel_load_modules boolean. Disabled by
default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn
on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn
on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to run with kerberos, you
must turn on the kerberos_enabled boolean. Enabled by default.
setsebool -P kerberos_enabled 1
If you want to allow system to run with NIS, you must turn on the
nis_enabled boolean. Disabled by default.
setsebool -P nis_enabled 1
If you want to allow confined applications to use nscd shared memory,
you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
If you want to support ecryptfs home directories, you must turn on the
use_ecryptfs_home_dirs boolean. Disabled by default.
setsebool -P use_ecryptfs_home_dirs 1
If you want to support fusefs home directories, you must turn on the
use_fusefs_home_dirs boolean. Disabled by default.
setsebool -P use_fusefs_home_dirs 1
If you want to support NFS home directories, you must turn on the
use_nfs_home_dirs boolean. Disabled by default.
setsebool -P use_nfs_home_dirs 1
If you want to support SAMBA home directories, you must turn on the
use_samba_home_dirs boolean. Disabled by default.
setsebool -P use_samba_home_dirs 1
If you want to allow ZoneMinder to run su/sudo, you must turn on the
zoneminder_run_sudo boolean. Disabled by default.
setsebool -P zoneminder_run_sudo 1
NSSWITCH DOMAIN
If you want to allow users to resolve user passwd entries directly from
ldap rather then using a sssd server for the system_dbusd_t, you must
turn on the authlogin_nsswitch_use_ldap boolean.
setsebool -P authlogin_nsswitch_use_ldap 1
If you want to allow confined applications to run with kerberos for the
system_dbusd_t, you must turn on the kerberos_enabled boolean.
setsebool -P kerberos_enabled 1
MANAGED FILES
The SELinux process type system_dbusd_t can manage files labeled with
the following file types. The paths listed are the default paths for
these file types. Note the processes UID still need to have DAC per‐
missions.
security_t
/selinux
system_dbusd_tmp_t
system_dbusd_var_run_t
/var/run/dbus(/.*)?
/var/named/chroot/var/run/dbus(/.*)?
systemd_passwd_var_run_t
/var/run/systemd/ask-password(/.*)?
/var/run/systemd/ask-password-block(/.*)?
FILE CONTEXTS
SELinux requires files to have an extended attribute to define the file
type.
You can see the context of a file using the -Z option to ls
Policy governs the access confined processes have to these files.
SELinux system_dbusd policy is very flexible allowing users to setup
their system_dbusd processes in as secure a method as possible.
STANDARD FILE CONTEXT
SELinux defines the file context types for the system_dbusd, if you
wanted to store files with these types in a diffent paths, you need to
execute the semanage command to sepecify alternate labeling and then
use restorecon to put the labels on disk.
semanage fcontext -a-t system_dbusd_tmp_t '/srv/system_dbusd/con‐
tent(/.*)?'
restorecon -R -v /srv/mysystem_dbusd_content
Note: SELinux often uses regular expressions to specify labels that
match multiple files.
The following file types are defined for system_dbusd:
system_dbusd_tmp_t
- Set files with the system_dbusd_tmp_t type, if you want to store sys‐
tem dbusd temporary files in the /tmp directories.
system_dbusd_var_lib_t
- Set files with the system_dbusd_var_lib_t type, if you want to store
the system dbusd files under the /var/lib directory.
system_dbusd_var_run_t
- Set files with the system_dbusd_var_run_t type, if you want to store
the system dbusd files under the /run or /var/run directory.
Paths:
/var/run/dbus(/.*)?, /var/named/chroot/var/run/dbus(/.*)?
Note: File context can be temporarily modified with the chcon command.
If you want to permanently change the file context you need to use the
semanage fcontext command. This will modify the SELinux labeling data‐
base. You will need to use restorecon to apply the labels.
COMMANDS
semanage fcontext can also be used to manipulate default file context
mappings.
semanage permissive can also be used to manipulate whether or not a
process type is permissive.
semanage module can also be used to enable/disable/install/remove pol‐
icy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux pol‐
icy settings.
AUTHOR
This manual page was auto-generated using sepolicy manpage .
SEE ALSOselinux(8), system_dbusd(8), semanage(8), restorecon(8), chcon(1),
sepolicy(8) , setsebool(8)system_dbusd 13-11-20 system_dbusd_selinux(8)
