tcpkali(1) Version 0.7 tcpkali(1)NAMEtcpkali-- fast TCP and WebSocket load generator and sink.
SYNOPSIStcpkali [OPTIONS] [host:port ...]
DESCRIPTIONtcpkali is a tool that helps stress-test and bench TCP and WebSocket
based systems. In the client mode tcpkali connects to the list of
specified hosts and ports and generates traffic for each of these
connections. In the server mode tcpkali accepts incoming connections
and throws away any incoming data.
tcpkali can throw unlimited or bandwidth-controlled traffic to the
remote destinations both in the client and in the server mode.
The client mode is triggered by specifying one or more host:port
arguments on the command line. The server mode is triggered by
specifying -l (--listen-port port).
OPTIONS
GENERAL OPTIONS
-h, --help
Print a help screen, then exit.
--version
Print version number, then exit.
-v, --verbose level
Increase (-v) or set (--verbose) output verbosity level [0..3].
Default is 1.
-w, --workers N
Number of parallel threads to use. Default is to use as many as
needed, up to the number of cores detected in the system.
NETWORK STACK SETTINGS
--nagle=on|off
Control Nagle algorithm (set TCP_NODELAY socket option).
--rcvbuf SizeBytes
Set TCP receive buffers (set SO_RCVBUF socket option).
--sndbuf SizeBytes
Set TCP send buffers (set SO_SNDBUF socket option).
--source-ip IP
By default, tcpkali automatically detects and uses all interface
aliases to connect to destination hosts. This default behavior
allows tcpkali to open more than 64k connections to
destinations.
Use the --source-ip to override this behavior by specifying a
particular source IP to use. Specifying --source-ip option
multiple times builds a list of source IPs to use.
TEST RUN OPTIONS
--ws, --websocket
Use RFC6455 WebSocket transport.
-c, --connections N
Number of concurrent connections to open to the destinations.
Default is 1.
--connect-rate Rate
Limit number of new connections per second. Default is 100
connections per second.
--connect-timeout Time
Limit time spent in a connection attempt. Default is 1 second.
--channel-lifetime Time
Shut down each connection after Time seconds.
--channel-bandwidth-upstream Bandwidth
Limit single connection bandwidth in the outgoing direction.
--channel-bandwidth-downstream Bandwidth
Limit single connection bandwidth in the incoming direction.
-l, --listen-port port
Accept connections on the specified port.
--listen-mode=silent|active
How to behave when a new client connection is received. In the
silent mode we do not send data and ignore the data received.
This is a default. In the active mode tcpkali sends messages to
the connected clients.
-T, --duration Time
Exit and print final stats after the specified amount of time.
Default is 10 seconds (-T10s).
TRAFFIC CONTENT OPTIONS
-e, --unescape-message-args
Unescape the message data specified by the -m, -f and the rest
of the traffic content options on the command line. Transform
\xxx into a byte with corresponding octal value, \n into a
newline character, etc.
--first-message
Send this message first, once at the beginning of each
connection.
--first-message-file filename
Read the message from a file and send it once at the beginning
of each connection.
-m, --message string
Repeatedly send the specified message to each destination.
-f, --message-file filename
Repeatedly send the message read from the file to each
destination.
-r, --message-rate Rate
Messages per second to send in a connection. tcpkali attempts
to preserve message boundaries. This setting is mutually
incompatible with --channel-bandwidth-upstream option, because
they control the same thing.
Traffic content expressions
tcpkali supports injecting a limited form of variability into the
generated content. All message data, be it the -m or --first-message,
can contain the dynamic expressions in the form of "\{EXPRESSION}".
Expressions can be of the following forms:
Expression Description
────────────────────────────────────────────────────────────────────────
connection.uid Unique number incremented for each new connection.
connection.ptr Pointer to a connection structure. Don't use.
EXPRESSION % int Remainder of the expression value divided by int.
Expressions can be used to provide some amount of variability to the
outgoing data stream. For example, the following command line might be
used to load 10 different resources from an HTTP server:
tcpkali-em 'GET /image-\{connection.uid%10}.jpg\r\n\r\n'
Expressions are evaluated even if the -e option is not given.
LATENCY MEASUREMENT OPTIONS
tcpkali measures latency by repeatedly recording the time difference
between the time the message is sent (as specified by -m or -f) and the
time the latency marker is observed in the downstream traffic. Latency
data is aggregated across all connections, and the latency percentiles
are displayed during and after the tcpkali session is done.
--latency-marker string
Specify a per-message sequence of characters to look for in the
data stream.
--latency-marker-skip N
Ignore the first N observations of a --latency-marker.
STATSD OPTIONS
--statsd
Enable StatsD output. StatsD output is disabled by default.
--statsd-host host
StatsD host to send metrics data to. Default is localhost.
--statsd-port port
StatsD port to use. Default is 8125.
--statsd-namespace string
Metric namespace. Default is "tcpkali".
VARIABLE UNITStcpkali recognizes a number of suffixes for numeric values.
Placeholder Recognized unit suffixes
─────────────────────────────────────────────────────────────────────────
N and Rate k (1000, as in "5k" equals to 5000), m (1000000).
SizeBytes k (1024, as in "5k" equals to 5120), m (1024*1024).
Bandwidth kbps, Mbps (for bits per second),
kBps, MBps (for bytes per second).
Time ms, s, m, h, d (milliseconds, seconds, minutes, etc).
Rate and Time can be fractional values, such as 0.25.
EXAMPLES
1. Throw 42 requests per second (-r) in each of the 10,000 connections
(-c) to an HTTP server (-m), replacing \n with newlines (-e):
tcpkali-c10k -r42 -em 'GET / HTTP/1.0\r\n\r\n' nonexistent.com:80
2. Create a WebSocket (--ws) server on a specifed port (-l) for an hour
(-T), but block clients from actually sending data:
tcpkali--ws -l8080 --channel-bandwidth-downstream=0 -T1h
3. Show server responses (--verbose) when we ping SMTP server once a
second (--connect-rate) disconnecting promptly (--channel-lifetime):
tcpkali --connect-rate=1 --channel-lifetime=0.1 -vvv
nonexistent.org:smtp
SEE ALSO
Sysctls to tune the system to be able to open more connections
...for N connections, such as 50k:
kern.maxfiles=10000+2*N # BSD
kern.maxfilesperproc=100+N # BSD
kern.ipc.maxsockets=10000+2*N # BSD
fs.file-max=10000+2*N # Linux
net.ipv4.tcp_max_orphans=N # Linux
# For load-generating clients.
net.ipv4.ip_local_port_range="10000 65535" # Linux.
net.inet.ip.portrange.hifirst=10000 # BSD/Mac.
net.inet.ip.portrange.hilast=65535 # (Enough for N < 55535)
net.ipv4.tcp_tw_reuse=1 # Linux
net.inet.tcp.maxtcptw=2*N # BSD
# If using netfilter on Linux:
net.netfilter.nf_conntrack_max=N
echo $((N/8)) > /sys/module/nf_conntrack/parameters/hashsize
Readings
· On TIME-WAIT state and its reuse:
http://vincent.bernat.im/en/blog/2014-tcp-time-wait-state-linux.html
· On netfliter settings:
http://serverfault.com/questions/482480/
AUTHORS
Lev Walkin <lwalkin@machinezone.com>.
TCPKali user manual 2015-12-11 tcpkali(1)
