tidy(1) User commands tidy(1)NAMEtidy - validate, correct, and pretty-print HTML files
(version: 25 March 2009)
SYNOPSIStidy [option ...] [file ...] [option ...] [file ...]
DESCRIPTION
Tidy reads HTML, XHTML and XML files and writes cleaned up markup. For
HTML variants, it detects and corrects many common coding errors and
strives to produce visually equivalent markup that is both W3C compli‐
ant and works on most browsers. A common use of Tidy is to convert
plain HTML to XHTML. For generic XML files, Tidy is limited to cor‐
recting basic well-formedness errors and pretty printing.
If no input file is specified, Tidy reads the standard input. If no
output file is specified, Tidy writes the tidied markup to the standard
output. If no error file is specified, Tidy writes messages to the
standard error. For command line options that expect a numerical argu‐
ment, a default is assumed if no meaningful value can be found.
OPTIONS
File manipulation
-output <file>, -o <file>
write output to the specified <file> (output-file: <file>)
-config <file>
set configuration options from the specified <file>
-file <file>, -f <file>
write errors and warnings to the specified <file> (error-file:
<file>)
-modify, -m
modify the original input files (write-back: yes)
Processing directives
-indent, -i
indent element content (indent: auto)
-wrap <column>, -w <column>
wrap text at the specified <column>. 0 is assumed if <column> is
missing. When this option is omitted, the default of the config‐
uration option "wrap" applies. (wrap: <column>)
-upper, -u
force tags to upper case (uppercase-tags: yes)
-clean, -c
replace FONT, NOBR and CENTER tags by CSS (clean: yes)
-bare, -b
strip out smart quotes and em dashes, etc. (bare: yes)
-numeric, -n
output numeric rather than named entities (numeric-entities:
yes)
-errors, -e
show only errors and warnings (markup: no)
-quiet, -q
suppress nonessential output (quiet: yes)
-omit omit optional end tags (hide-endtags: yes)
-xml specify the input is well formed XML (input-xml: yes)
-asxml, -asxhtml
convert HTML to well formed XHTML (output-xhtml: yes)
-ashtml
force XHTML to well formed HTML (output-html: yes)
-access <level>
do additional accessibility checks (<level> = 0, 1, 2, 3). 0 is
assumed if <level> is missing. (accessibility-check: <level>)
Character encodings
-raw output values above 127 without conversion to entities
-ascii use ISO-8859-1 for input, US-ASCII for output
-latin0
use ISO-8859-15 for input, US-ASCII for output
-latin1
use ISO-8859-1 for both input and output
-iso2022
use ISO-2022 for both input and output
-utf8 use UTF-8 for both input and output
-mac use MacRoman for input, US-ASCII for output
-win1252
use Windows-1252 for input, US-ASCII for output
-ibm858
use IBM-858 (CP850+Euro) for input, US-ASCII for output
-utf16le
use UTF-16LE for both input and output
-utf16be
use UTF-16BE for both input and output
-utf16 use UTF-16 for both input and output
-big5 use Big5 for both input and output
-shiftjis
use Shift_JIS for both input and output
-language <lang>
set the two-letter language code <lang> (for future use) (lan‐
guage: <lang>)
Miscellaneous
-version, -v
show the version of Tidy
-help, -h, -?
list the command line options
-xml-help
list the command line options in XML format
-help-config
list all configuration options
-xml-config
list all configuration options in XML format
-show-config
list the current configuration settings
USAGE
Use --optionX valueX for the detailed configuration option "optionX"
with argument "valueX". See also below under Detailed Configuration
Options as to how to conveniently group all such options in a single
config file.
Input/Output default to stdin/stdout respectively. Single letter
options apart from -f and -o may be combined as in:
tidy-f errs.txt -imu foo.html
For further info on HTML see http://www.w3.org/MarkUp.
For more information about HTML Tidy, visit the project home page at
http://tidy.sourceforge.net. Here, you will find links to documenta‐
tion, mailing lists (with searchable archives) and links to report
bugs.
ENVIRONMENT
HTML_TIDY
Name of the default configuration file. This should be an abso‐
lute path, since you will probably invoke tidy from different
directories. The value of HTML_TIDY will be parsed after the
compiled-in default (defined with -DTIDY_CONFIG_FILE), but
before any of the files specified using -config.
EXIT STATUS
0 All input files were processed successfully.
1 There were warnings.
2 There were errors.
______________________________DETAILED CONFIGURATION OPTIONS
This section describes the Detailed (i.e., "expanded") Options, which
may be specified by preceding each option with -- at the command line,
followed by its desired value, OR by placing the options and values in
a configuration file, and telling tidy to read that file with the -con‐
fig standard option.
SYNOPSIStidy--option1 value1 --option2 value2 [standard options ...]
tidy-config config-file [standard options ...]
WARNING
The options detailed here do not include the "standard" command-line
options (i.e., those preceded by a single '-') described above in the
first section of this man page.
DESCRIPTION
A list of options for configuring the behavior of Tidy, which can be
passed either on the command line, or specified in a configuration
file.
A Tidy configuration file is simply a text file, where each option is
listed on a separate line in the form
option1: value1
option2: value2
etc.
The permissible values for a given option depend on the option's Type.
There are five types: Boolean, AutoBool, DocType, Enum, and String.
Boolean types allow any of yes/no, y/n, true/false, t/f, 1/0. Auto‐
Bools allow auto in addition to the values allowed by Booleans. Inte‐
ger types take non-negative integers. String types generally have no
defaults, and you should provide them in non-quoted form (unless you
wish the output to contain the literal quotes).
Enum, Encoding, and DocType "types" have a fixed repertoire of items;
consult the Example[s] provided below for the option[s] in question.
You only need to provide options and values for those whose defaults
you wish to override, although you may wish to include some already-
defaulted options and values for the sake of documentation and explic‐
itness.
Here is a sample config file, with at least one example of each of the
five Types:
// sample Tidy configuration options
output-xhtml: yes
add-xml-decl: no
doctype: strict
char-encoding: ascii
indent: auto
wrap: 76
repeated-attributes: keep-last
error-file: errs.txt
Below is a summary and brief description of each of the options. They
are listed alphabetically within each category. There are five cate‐
gories: HTML, XHTML, XML options, Diagnostics options, Pretty Print
options, Character Encoding options, and Miscellaneous options.
OPTIONS
HTML, XHTML, XML options:
add-xml-decl
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should add the XML declaration
when outputting XML or XHTML. Note that if the input already
includes an <?xml ... ?> declaration then this option will be
ignored. If the encoding for the output is different from
"ascii", one of the utf encodings or "raw", the declaration is
always added as required by the XML standard.
See also: char-encoding, output-encoding
add-xml-space
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should add xml:space="preserve" to
elements such as <PRE>, <STYLE> and <SCRIPT> when generating
XML. This is needed if the whitespace in such elements is to be
parsed appropriately without having access to the DTD.
alt-text
Type: String
Default: -
Default: -
This option specifies the default "alt=" text Tidy uses for
<IMG> attributes. This feature is dangerous as it suppresses
further accessibility warnings. You are responsible for making
your documents accessible to people who can not see the images!
anchor-as-name
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option controls the deletion or addition of the name
attribute in elements where it can serve as anchor. If set to
"yes", a name attribute, if not already existing, is added along
an existing id attribute if the DTD allows it. If set to "no",
any existing name attribute is removed if an id attribute exists
or has been added.
assume-xml-procins
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should change the parsing of pro‐
cessing instructions to require ?> as the terminator rather than
>. This option is automatically set if the input is in XML.
bare
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should strip Microsoft specific
HTML from Word 2000 documents, and output spaces rather than
non-breaking spaces where they exist in the input.
clean
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should strip out surplus presenta‐
tional tags and attributes replacing them by style rules and
structural markup as appropriate. It works well on the HTML
saved by Microsoft Office products.
See also: drop-font-tags
css-prefix
Type: String
Default: -
Default: -
This option specifies the prefix that Tidy uses for styles
rules. By default, "c" will be used.
decorate-inferred-ul
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should decorate inferred UL ele‐
ments with some CSS markup to avoid indentation to the right.
doctype
Type: DocType
Default: auto
Example: omit, auto, strict, transitional, user
This option specifies the DOCTYPE declaration generated by Tidy.
If set to "omit" the output won't contain a DOCTYPE declaration.
If set to "auto" (the default) Tidy will use an educated guess
based upon the contents of the document. If set to "strict",
Tidy will set the DOCTYPE to the strict DTD. If set to "loose",
the DOCTYPE is set to the loose (transitional) DTD. Alterna‐
tively, you can supply a string for the formal public identifier
(FPI).
For example:
doctype: "-//ACME//DTD HTML 3.14159//EN"
If you specify the FPI for an XHTML document, Tidy will set the
system identifier to an empty string. For an HTML document, Tidy
adds a system identifier only if one was already present in
order to preserve the processing mode of some browsers. Tidy
leaves the DOCTYPE for generic XML documents unchanged. --doc‐
type omit implies --numeric-entities yes. This option does not
offer a validation of the document conformance.
drop-empty-paras
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should discard empty paragraphs.
drop-font-tags
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should discard <FONT> and <CENTER>
tags without creating the corresponding style rules. This option
can be set independently of the clean option.
See also: clean
drop-proprietary-attributes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should strip out proprietary
attributes, such as MS data binding attributes.
enclose-block-text
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should insert a <P> element to
enclose any text it finds in any element that allows mixed con‐
tent for HTML transitional but not HTML strict.
enclose-text
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should enclose any text it finds
in the body element within a <P> element. This is useful when
you want to take existing HTML and use it with a style sheet.
escape-cdata
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should convert <![CDATA[]]> sec‐
tions to normal text.
fix-backslash
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should replace backslash charac‐
ters "\" in URLs by forward slashes "/".
fix-bad-comments
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should replace unexpected hyphens
with "=" characters when it comes across adjacent hyphens. The
default is yes. This option is provided for users of Cold Fusion
which uses the comment syntax: <!--- --->
fix-uri
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should check attribute values that
carry URIs for illegal characters and if such are found, escape
them as HTML 4 recommends.
hide-comments
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should print out comments.
hide-endtags
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should omit optional end-tags when
generating the pretty printed markup. This option is ignored if
you are outputting to XML.
indent-cdata
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should indent <![CDATA[]]> sec‐
tions.
input-xml
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should use the XML parser rather
than the error correcting HTML parser.
join-classes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should combine class names to gen‐
erate a single new class name, if multiple class assignments are
detected on an element.
See also: join-styles, repeated-attributes
join-styles
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should combine styles to generate
a single new style, if multiple style values are detected on an
element.
See also: join-classes, repeated-attributes
literal-attributes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should ensure that whitespace
characters within attribute values are passed through unchanged.
logical-emphasis
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should replace any occurrence of
<I> by <EM> and any occurrence of <B> by <STRONG>. In both
cases, the attributes are preserved unchanged. This option can
be set independently of the clean and drop-font-tags options.
lower-literals
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should convert the value of an
attribute that takes a list of predefined values to lower case.
This is required for XHTML documents.
merge-divs
Type: AutoBool
Default: auto
Example: auto, y/n, yes/no, t/f, true/false, 1/0
Can be used to modify behavior of -c (--clean yes) option. This
option specifies if Tidy should merge nested <div> such as
"<div><div>...</div></div>". If set to "auto", the attributes of
the inner <div> are moved to the outer one. As well, nested
<div> with ID attributes are not merged. If set to "yes", the
attributes of the inner <div> are discarded with the exception
of "class" and "style".
See also: clean, merge-spans
merge-spans
Type: AutoBool
Default: auto
Example: auto, y/n, yes/no, t/f, true/false, 1/0
Can be used to modify behavior of -c (--clean yes) option. This
option specifies if Tidy should merge nested <span> such as
"<span><span>...</span></span>". The algorithm is identical to
the one used by --merge-divs.
See also: clean, merge-divs
ncr
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should allow numeric character
references.
new-blocklevel-tags
Type: Tag names
Default: -
Example: tagX, tagY, ...
This option specifies new block-level tags. This option takes a
space or comma separated list of tag names. Unless you declare
new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags. Note you can't change
the content model for elements such as <TABLE>, <UL>, <OL> and
<DL>. This option is ignored in XML mode.
See also: new-empty-tags, new-inline-tags, new-pre-tags
new-empty-tags
Type: Tag names
Default: -
Example: tagX, tagY, ...
This option specifies new empty inline tags. This option takes a
space or comma separated list of tag names. Unless you declare
new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags. Remember to also declare
empty tags as either inline or blocklevel. This option is
ignored in XML mode.
See also: new-blocklevel-tags, new-inline-tags, new-pre-tags
new-inline-tags
Type: Tag names
Default: -
Example: tagX, tagY, ...
This option specifies new non-empty inline tags. This option
takes a space or comma separated list of tag names. Unless you
declare new tags, Tidy will refuse to generate a tidied file if
the input includes previously unknown tags. This option is
ignored in XML mode.
See also: new-blocklevel-tags, new-empty-tags, new-pre-tags
new-pre-tags
Type: Tag names
Default: -
Example: tagX, tagY, ...
This option specifies new tags that are to be processed in
exactly the same way as HTML's <PRE> element. This option takes
a space or comma separated list of tag names. Unless you declare
new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags. Note you can not as yet
add new CDATA elements (similar to <SCRIPT>). This option is
ignored in XML mode.
See also: new-blocklevel-tags, new-empty-tags, new-inline-tags
numeric-entities
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output entities other than
the built-in HTML entities (&, <, > and ") in the
numeric rather than the named entity form. Only entities compat‐
ible with the DOCTYPE declaration generated are used. Entities
that can be represented in the output encoding are translated
correspondingly.
See also: doctype, preserve-entities
output-html
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should generate pretty printed
output, writing it as HTML.
output-xhtml
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should generate pretty printed
output, writing it as extensible HTML. This option causes Tidy
to set the DOCTYPE and default namespace as appropriate to
XHTML. If a DOCTYPE or namespace is given they will checked for
consistency with the content of the document. In the case of an
inconsistency, the corrected values will appear in the output.
For XHTML, entities can be written as named or numeric entities
according to the setting of the "numeric-entities" option. The
original case of tags and attributes will be preserved, regard‐
less of other options.
output-xml
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should pretty print output, writ‐
ing it as well-formed XML. Any entities not defined in XML 1.0
will be written as numeric entities to allow them to be parsed
by a XML parser. The original case of tags and attributes will
be preserved, regardless of other options.
preserve-entities
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should preserve the well-formed
entitites as found in the input.
quote-ampersand
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output unadorned & charac‐
ters as &.
quote-marks
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output " characters as
" as is preferred by some editing environments. The apos‐
trophe character ' is written out as ' since many web
browsers don't yet support '.
quote-nbsp
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output non-breaking space
characters as entities, rather than as the Unicode character
value 160 (decimal).
repeated-attributes
Type: enum
Default: keep-last
Example: keep-first, keep-last
This option specifies if Tidy should keep the first or last
attribute, if an attribute is repeated, e.g. has two align
attributes.
See also: join-classes, join-styles
replace-color
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should replace numeric values in
color attributes by HTML/XHTML color names where defined, e.g.
replace "#ffffff" with "white".
show-body-only
Type: AutoBool
Default: no
Example: auto, y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should print only the contents of
the body tag as an HTML fragment. If set to "auto", this is per‐
formed only if the body tag has been inferred. Useful for incor‐
porating existing whole pages as a portion of another page. This
option has no effect if XML output is requested.
uppercase-attributes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output attribute names in
upper case. The default is no, which results in lower case
attribute names, except for XML input, where the original case
is preserved.
uppercase-tags
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output tag names in upper
case. The default is no, which results in lower case tag names,
except for XML input, where the original case is preserved.
word-2000
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should go to great pains to strip
out all the surplus stuff Microsoft Word 2000 inserts when you
save Word documents as "Web pages". Doesn't handle embedded
images or VML. You should consider using Word's "Save As: Web
Page, Filtered".
Diagnostics options:
accessibility-check
Type: enum
Default: 0 (Tidy Classic)
Example: 0 (Tidy Classic), 1 (Priority 1 Checks), 2 (Priority 2
Checks), 3 (Priority 3 Checks)
This option specifies what level of accessibility checking, if
any, that Tidy should do. Level 0 is equivalent to Tidy Clas‐
sic's accessibility checking. For more information on Tidy's
accessibility checking, visit the Adaptive Technology Resource
Centre at the University of Toronto at
http://www.aprompt.ca/Tidy/accessibilitychecks.html.
show-errors
Type: Integer
Default: 6
Example: 0, 1, 2, ...
This option specifies the number Tidy uses to determine if fur‐
ther errors should be shown. If set to 0, then no errors are
shown.
show-warnings
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should suppress warnings. This can
be useful when a few errors are hidden in a flurry of warnings.
Pretty Print options:
break-before-br
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output a line break before
each <BR> element.
indent
Type: AutoBool
Default: no
Example: auto, y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should indent block-level tags. If
set to "auto", this option causes Tidy to decide whether or not
to indent the content of tags such as TITLE, H1-H6, LI, TD, TD,
or P depending on whether or not the content includes a block-
level element. You are advised to avoid setting indent to yes as
this can expose layout bugs in some browsers.
See also: indent-spaces
indent-attributes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should begin each attribute on a
new line.
indent-spaces
Type: Integer
Default: 2
Example: 0, 1, 2, ...
This option specifies the number of spaces Tidy uses to indent
content, when indentation is enabled.
See also: indent
markup
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should generate a pretty printed
version of the markup. Note that Tidy won't generate a pretty
printed version if it finds significant errors (see force-out‐
put).
punctuation-wrap
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap after some Uni‐
code or Chinese punctuation characters.
sort-attributes
Type: enum
Default: none
Example: none, alpha
This option specifies that tidy should sort attributes within an
element using the specified sort algorithm. If set to "alpha",
the algorithm is an ascending alphabetic sort.
split
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
Currently not used. Tidy Classic only.
tab-size
Type: Integer
Default: 8
Example: 0, 1, 2, ...
This option specifies the number of columns that Tidy uses
between successive tab stops. It is used to map tabs to spaces
when reading the input. Tidy never outputs tabs.
vertical-space
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should add some empty lines for
readability.
wrap
Type: Integer
Default: 68
Example: 0 (no wrapping), 1, 2, ...
This option specifies the right margin Tidy uses for line wrap‐
ping. Tidy tries to wrap lines so that they do not exceed this
length. Set wrap to zero if you want to disable line wrapping.
wrap-asp
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap text contained
within ASP pseudo elements, which look like: <% ... %>.
wrap-attributes
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap attribute values,
for easier editing. This option can be set independently of
wrap-script-literals.
See also: wrap-script-literals
wrap-jste
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap text contained
within JSTE pseudo elements, which look like: <# ... #>.
wrap-php
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap text contained
within PHP pseudo elements, which look like: <?php ... ?>.
wrap-script-literals
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap string literals
that appear in script attributes. Tidy wraps long script string
literals by inserting a backslash character before the line
break.
See also: wrap-attributes
wrap-sections
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should line wrap text contained
within <![ ... ]> section tags.
Character Encoding options:
ascii-chars
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
Can be used to modify behavior of -c (--clean yes) option. If
set to "yes" when using -c, &emdash;, ”, and other named
character entities are downgraded to their closest ascii equiva‐
lents.
See also: clean
char-encoding
Type: Encoding
Default: ascii
Example: raw, ascii, latin0, latin1, utf8, iso2022, mac,
win1252, ibm858, utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for both
the input and output. For ascii, Tidy will accept Latin-1
(ISO-8859-1) character values, but will use entities for all
characters whose value > 127. For raw, Tidy will output values
above 127 without translating them into entities. For latin1,
characters above 255 will be written as entities. For utf8, Tidy
assumes that both input and output is encoded as UTF-8. You can
use iso2022 for files encoded using the ISO-2022 family of
encodings e.g. ISO-2022-JP. For mac and win1252, Tidy will
accept vendor specific character values, but will use entities
for all characters whose value > 127. For unsupported encodings,
use an external utility to convert to and from UTF-8.
See also: input-encoding, output-encoding
input-encoding
Type: Encoding
Default: latin1
Example: raw, ascii, latin0, latin1, utf8, iso2022, mac,
win1252, ibm858, utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for the
input. See char-encoding for more info.
See also: char-encoding
language
Type: String
Default: -
Default: -
Currently not used, but this option specifies the language Tidy
uses (for instance "en").
newline
Type: enum
Default: Platform dependent
Example: LF, CRLF, CR
The default is appropriate to the current platform: CRLF on PC-
DOS, MS-Windows and OS/2, CR on Classic Mac OS, and LF every‐
where else (Unix and Linux).
output-bom
Type: AutoBool
Default: auto
Example: auto, y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should write a Unicode Byte Order
Mark character (BOM; also known as Zero Width No-Break Space;
has value of U+FEFF) to the beginning of the output; only for
UTF-8 and UTF-16 output encodings. If set to "auto", this option
causes Tidy to write a BOM to the output only if a BOM was
present at the beginning of the input. A BOM is always written
for XML/XHTML output using UTF-16 output encodings.
output-encoding
Type: Encoding
Default: ascii
Example: raw, ascii, latin0, latin1, utf8, iso2022, mac,
win1252, ibm858, utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for the
output. See char-encoding for more info. May only be different
from input-encoding for Latin encodings (ascii, latin0, latin1,
mac, win1252, ibm858).
See also: char-encoding
Miscellaneous options:
error-file
Type: String
Default: -
Default: -
This option specifies the error file Tidy uses for errors and
warnings. Normally errors and warnings are output to "stderr".
See also: output-file
force-output
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should produce output even if
errors are encountered. Use this option with care - if Tidy
reports an error, this means Tidy was not able to, or is not
sure how to, fix the error, so the resulting output may not
reflect your intention.
gnu-emacs
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should change the format for
reporting errors and warnings to a format that is more easily
parsed by GNU Emacs.
gnu-emacs-file
Type: String
Default: -
Default: -
Used internally.
keep-time
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should keep the original modifica‐
tion time of files that Tidy modifies in place. The default is
no. Setting the option to yes allows you to tidy files without
causing these files to be uploaded to a web server when using a
tool such as SiteCopy. Note this feature is not supported on
some platforms.
output-file
Type: String
Default: -
Default: -
This option specifies the output file Tidy uses for markup. Nor‐
mally markup is written to "stdout".
See also: error-file
quiet
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should output the summary of the
numbers of errors and warnings, or the welcome or informational
messages.
slide-style
Type: String
Default: -
Default: -
Currently not used. Tidy Classic only.
tidy-mark
Type: Boolean
Default: yes
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should add a meta element to the
document head to indicate that the document has been tidied.
Tidy won't add a meta element if one is already present.
write-back
Type: Boolean
Default: no
Example: y/n, yes/no, t/f, true/false, 1/0
This option specifies if Tidy should write back the tidied
markup to the same file it read from. You are advised to keep
copies of important files before tidying them, as on rare occa‐
sions the result may not be what you expect.
SEE ALSO
HTML Tidy Project Page at http://tidy.sourceforge.net
AUTHOR
Tidy was written by Dave Raggett <dsr@w3.org>, and is now maintained
and developed by the Tidy team at http://tidy.sourceforge.net/. It is
released under the MIT Licence.
Generated automatically with HTML Tidy released on 25 March 2009.
HTML Tidy 25 March 2009 $Date: 2007/02/01 12:25:21 $ tidy(1)
