TRACETOP(1) User Commands TRACETOP(1)NAMEtracetop - show top flows
SYNOPSIStracetop [ -f bpf | --filter=bpf] [ -s snaplen | --snaplen=snaplen] [
-p promisc | --promisc=promisc] [ --bits-per-sec ] [ --percent ] [
--wide | -w ] [ -i interval | --interval=interval] [ -h | --help] [ -H
| --libtrace-help] inputuri ...
DESCRIPTIONtracetop shows the top 'n' flows every second
-f bpf filter
Count only packets that match tcpdump style bpf filter
-i interval
Wait interval seconds between updates. (default 2).
--wide Expand the display to be able to fit IPv6 addresses. Use this to
ensure the formatting lines up in the presence of IPv6 traffic.
--percent
Display flow bytes and packets as a percentage of total traffic
--bits-per-second
Display flow bandwidth as the number of bits per second.
LINKS
More details about tracetop (and libtrace) can be found at
http://www.wand.net.nz/trac/libtrace/wiki/UserDocumentation
SEE ALSOlibtrace(3), tracemerge(1), tracefilter(1), traceconvert(1), traces‐
plit_dir(1), tracereport(1), tracertstats(1), tracestats(1), tracepkt‐
dump(1), traceanon(1), tracesummary(1), tracereplay(1), tracediff(1),
traceends(1), tracetopends(1)AUTHORS
Perry Lorier <perry@cs.waikato.ac.nz>
tracetop (libtrace) March 2009 TRACETOP(1)