NUT.CONF(5) Network UPS Tools (NUT) NUT.CONF(5)NAMEnut.conf - UPS definitions for Network UPS Tools
DESCRIPTION
This file attempts to standardize the various files being found in dif‐
ferent installations, like /etc/default/nut on Debian based systems and
/etc/sysconfig/nut on RedHat based systems.
Distribution's init script should source this file in order to deter‐
mine which component(s) has to be started.
Blank lines are ignored. Lines with a hash ('#') character at the 1st
position of the line are ignored too. They can be used to add com‐
ments.
DIRECTIVES
MODE Required. Recognized values are none, standalone, netserver and
netclient. Defaults to none.
none: Indicates that NUT should not get started automatically,
possibly because it is not configured or that an Integrated
Power Management or some external system, is used to startup the
NUT components.
standalone: Addresses a local only configuration, with 1 UPS
protecting the local system. This implies to start the 3 NUT
layers (driver, upsd and upsmon), with the related configuration
files. This mode can also address UPS redundancy.
netserver: Like the standalone configuration, but also need some
more ACLs and possibly a specific LISTEN directive in upsd.conf.
Since this MODE is open to the network, a special care should be
applied to security concerns.
netclient: When only upsmon is required, possibly because there
are other hosts that are more closely attached to the UPS, the
MODE should be set to netclient.
UPSD_OPTIONS
Optional. Set upsd specific options. See upsd(8) for more
details. It is ignored when MODE above indicates that no upsd
should be running.
UPSMON_OPTIONS
Optional. Set upsmon specific options. See upsmon(8) for more
details. It is ignored when MODE above indicates that no upsmon
should be running.
POWEROFF_WAIT
Optional. At the end of an emergency system halt, the upsmon
master will signal the UPS to switch off. This may fail for a
number of reasons. Most notably is the case that mains power
returns during the shutdown process. See the section "Power
races" in /usr/share/doc/nut/docs/shutdown.txt.gz. The system
will wait this long for the UPS to cut power, and then reboot.
It should be long enough to exhaust the batteries, in case line
power continues to be unavailable. On the other hand, it should
not be so long that the system remains offline for an unreason‐
able amount of time if line power has returned. See sleep(1)
for compatible time syntax. If you specify the time in seconds,
use the "s" suffix.
WARNING: this workaround might be dangerous under some circum‐
stances. Please read http://bugs.debian.org/358696 for more
details.
EXAMPLE
# /etc/nut/nut.conf. See nut.conf(5)
MODE = none
UPSD_OPTIONS = ""
UPSMON_OPTIONS = ""
# POWEROFF_WAIT = 15m
INTEGRATION
An init script, such as /etc/init.d/nut, is expected to source this
file in order to determine which component(s) has to be started.
SEE ALSOups.conf(5), upsd.conf(5), upsd.users(5), upsmon.conf(5)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Sun May 10 2009 NUT.CONF(5)